3.8 (195)

وصف:

المباراة الاولى RE-VOLT ظهرت في عام 1999، وقد أفرج عنه في أجهزة الكمبيوتر الشخصية وأجهزة لنينتندو، كاست وpleysteyshn الأولى، ولكن بعد ذلك، على الرغم من بعض نسيت شعبية بطريقة أو بأخرى عن اللعبة، ولكن بصفة عامة، هو مثل الآن يحتوي على الكثير من المرح، والأهم من ذلك - المزايا الرئيسية، وهي:


الجزء الثاني، وفقا للمطورين، ويعد بأن يكون أفضل بكثير لأن الفعلية في الواقع، هذا واحد معدلة، ولماذا لا؟ تحسين الرسومات، المركبات الجديدة، والمسارات الجديدة ... والفيزياء، وخلال تلك السنوات كانت معقولة جدا! وبالإضافة إلى ذلك، هذه لعبة الورق، وذلك ما يمكن أن تكون المطالبة؟ وعلاوة على ذلك، منذ ما يقرب من 15 سنوات التي مرت منذ الإصدار الأول من نماذج الاذاعة التي تسيطر عليها اكتسبت شعبية هائلة بين الشباب، بحيث هذه المرة اللعبة سوف تكسب الكثير من المشجعين، وأنها جاءت في الوقت المناسب تماما!

ميزات RE-VOLT 2: أفضل RC 3D سباق:

إعلان

تحميل RE-VOLT 2: أفضل RC 3D سباق 1.3.9

الجديد في هذا الإصدار
[1.3.9]
- Minor bug fix.
[1.3.8]
- Minor bug fix.
[1.3.7]
- Minor bug fix.
[1.3.6]
- Minor bug fix.
[1.3.5]
- Minor bug fix.
[1.3.2]
- The reward of Facebook Like has been upgraded.
(5 Batteries -> 10 Crystals)
- Cannot some rewards because of SNS policy is changed through invite to Facebook Friend of your.
معلومات عامة
نص 1.3.9 (2000002039)
تحميل التسجيل 2017-06-11 00:54
حجم 48.7 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
[1.3.8]
- Minor bug fix.
[1.3.7]
- Minor bug fix.
[1.3.6]
- Minor bug fix.
[1.3.5]
- Minor bug fix.
[1.3.2]
- The reward of Facebook Like has been upgraded.
(5 Batteries -> 10 Crystals)
- Cannot some rewards because of SNS policy is changed through invite to Facebook Friend of your.
معلومات عامة
نص 1.3.8 (2000002038)
تحميل التسجيل 2016-04-23 06:08
حجم 48.78 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.3.7 (2000002037)
تحميل التسجيل 2016-03-30 05:19
حجم 49.01 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.3.6 (2000002036)
تحميل التسجيل 2016-02-03 06:56
حجم 49.01 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.3.5 (2000002035)
تحميل التسجيل 2015-09-11 06:21
حجم 47.19 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.3.4 (2000002034)
تحميل التسجيل 2015-08-08 01:48
حجم 47.19 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.3.2 (2000002032)
تحميل التسجيل 2015-04-14 07:07
حجم 47.03 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.3.1 (2000002031)
تحميل التسجيل 2015-01-22 17:00
حجم 47.02 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.2.8 (2000002028)
تحميل التسجيل 2014-11-08 06:15
حجم 48.43 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
[1.3.9]
- Minor bug fix.
[1.3.8]
- Minor bug fix.
[1.3.7]
- Minor bug fix.
[1.3.6]
- Minor bug fix.
[1.3.5]
- Minor bug fix.
[1.3.2]
- The reward of Facebook Like has been upgraded.
(5 Batteries -> 10 Crystals)
- Cannot some rewards because of SNS policy is changed through invite to Facebook Friend of your.
معلومات عامة
نص 1.0.3 (2000002003)
تحميل التسجيل 2017-11-25 16:38
حجم 46.37 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.0.2 (2000002002)
تحميل التسجيل 2013-11-11 09:55
حجم 46.35 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك, واسمحوا لنا أن نعرف

2013/11/12 09:53
ألعاب ذات صلة:
© 2011-2024 mob-core.com