4 (77)

وصف:

رسم على الفور انتباهكم أن هذا هو كل مجرد لعبة RE-VOLT 2، ولكن تقديم طلب منفصل للعب على الانترنت حصرا - RE-VOLT 2: المتعدد، لذلك اخترت ماذا أنت تفضل أن يقود على وصحتك!

شخصيا، أتذكر هذه اللعبة من خلال الكمبيوتر القديم أخرى، وليس من المستغرب، وهي المرة الأولى أنها جاءت إلى العالم منذ 15 عاما! حتى ذلك الحين، كان لديها رسومات جيدة والفيزياء غير عادية جدا، يمكن للمرء أن يشعر صاحب سيارة الاذاعة التي تسيطر عليها باردة! على مر السنين، وجميع الروبوت ليس كثيرا قد تغير، حتى أنه في عام، الأمر كله مجرد لعبة المحرز في أفضل تقاليد.

إيجابيات وخاصة RE-VOLT 2 المتعدد:



سلبيات لعبة RE-VOLT 2 المتعدد:



الاستنتاج: إن الجزء الأول من هذه اللعبة على الروبوت قد النسخة المدفوعة، يمكنك شراء فقط مرة واحدة وإلى الأبد ننسى المال، في هذه الحالة، فإن المطورين قد ذهب أي وسيلة أخرى، مما يجعل اللعبة خالية تماما، ولكن مع مجموعة من التبرع التي سوف تأتي حرفيا في كل الزاوية! لا أعتقد أن هذه اللعبة التي لن تشتري، أنها ستشتري فقط تذكر أنه، ولكن الفكرة الحالية قد ينفر المستخدمين ...

إعلان

تحميل RE-VOLT 2: المتعدد 1.4.5

الجديد في هذا الإصدار
[1.4.5]
1. Minor bug fix.
[1.4.4]
1. Minor bug fix.
[1.4.3]
1. Minor bug fix.
[1.4.3]
1. Minor bug fix.
[1.4.2]
1. Minor bug fix.
[1.4.1]
1. Support Malaysian
[1.4.0]
1. Minor bug fix.
معلومات عامة
نص 1.4.5 (1004005)
تحميل التسجيل 2016-04-29 03:28
حجم 45.85 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

معلومات عامة
نص 1.4.3 (1004003)
تحميل التسجيل 2016-04-13 03:25
حجم 45.74 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

معلومات عامة
نص 1.4.2 (1004002)
تحميل التسجيل 2016-02-17 04:17
حجم 45.74 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

معلومات عامة
نص 1.4.1 (1004001)
تحميل التسجيل 2015-10-20 03:35
حجم 45.74 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

معلومات عامة
نص 1.4.0 (1004000)
تحميل التسجيل 2015-08-07 16:06
حجم 45.6 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
[1.3.8]
- Minor bug fix.
[1.3.7]
- Minor bug fix.
[1.3.6]
- Minor bug fix.
[1.3.5]
- Minor bug fix.
[1.3.2]
- The reward of Facebook Like has been upgraded.
(5 Batteries -> 10 Crystals)
- Cannot some rewards because of SNS policy is changed through invite to Facebook Friend of your.
معلومات عامة
نص 1.3.8 (1003008)
تحميل التسجيل 2015-06-02 07:58
حجم 45.6 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

معلومات عامة
نص 1.3.7 (1003007)
تحميل التسجيل 2015-04-21 08:46
حجم 45.6 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

معلومات عامة
نص 1.3.6 (1003006)
تحميل التسجيل 2015-02-03 09:08
حجم 45.58 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

معلومات عامة
نص 1.3.5 (1003005)
تحميل التسجيل 2015-01-22 03:55
حجم 44.93 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
[1.4.5]
1. Minor bug fix.
[1.4.4]
1. Minor bug fix.
[1.4.3]
1. Minor bug fix.
[1.4.3]
1. Minor bug fix.
[1.4.2]
1. Minor bug fix.
[1.4.1]
1. Support Malaysian
[1.4.0]
1. Minor bug fix.
معلومات عامة
نص 1.3.2 (1003002)
تحميل التسجيل 2017-11-25 16:58
حجم 44.91 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
[1.4.5]
1. Minor bug fix.
[1.4.4]
1. Minor bug fix.
[1.4.3]
1. Minor bug fix.
[1.4.3]
1. Minor bug fix.
[1.4.2]
1. Minor bug fix.
[1.4.1]
1. Support Malaysian
[1.4.0]
1. Minor bug fix.
معلومات عامة
نص 1.3.0 (1003000)
تحميل التسجيل 2017-11-25 16:56
حجم 49.55 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

معلومات عامة
نص 1.2.5 (1002005)
تحميل التسجيل 2014-12-02 05:18
حجم 48.89 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

معلومات عامة
نص 1.2.1 (1002001)
تحميل التسجيل 2014-11-07 12:06
حجم 49.61 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

معلومات عامة
نص 1.0.10 (1000010)
تحميل التسجيل 2014-08-07 17:16
حجم 48.85 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM6
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

SET_ORIENTATION

DEVICE_POWER

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك, واسمحوا لنا أن نعرف

2014/08/08 08:12
ألعاب ذات صلة:
© 2011-2024 mob-core.com