تحميل التزلج سفاري 2 1.5.1279 لالروبوت

ألعاب للأندرويد / رواق /

3.9 (10)

التزلج سفاري 2

الاطلاع على ملفات أبك المتاحة

وصف:

تم استبدال منطق من قبل المطورين، يجب أن تكون هذه اللعبة استمرارا منطقيا من الجزء الأول شعبية جدا، والتي، وفقا لمطوري تم تحميل أكثر من 140 مليون مرة هذا المبلغ أكثر من لائق، ولكن أنا متأكد من أنها تنطبق على جميع المنصات في المجموع. ومع ذلك، فإن العديد تعرف مسبقا ما يمكن توقعه من هذه اللعبة، وسنرى كيف كان الجزء الثاني يستحق اهتمامنا.

بالطبع نحن متأكدون أن المرح ورائعة اللعبة أصبحت أفضل بكثير، وأعتقد أنه ليس من الصعب تحديد.
بشكل عام، لم يتغير جوهر اللعبة، لا يزال لديك لدفع إلى المنحدرات على الزلاجات أو على الجليد، المثيرة أداء، والتي يمكنك الحصول على نقاط وأقوياء البنية في الشبكات الاجتماعية، والحصول على الأدرينالين ضخ، و، كما كان من قبل، وذلك باستخدام عناصر الطبيعة في فصل الشتاء وحذر من الانهيارات الثلجية.
في التزلج سفاري 2 لعبة ونحن في انتظار المخلوقات التالية:

الهدر اليتي
كما البطاريق دائما مضحك
الماموث، والتي توفي بها يست خفية فقط!

وكل مخلوق يسمح لك للاستفادة من ميزة فريدة من نوعها وبعد ذلك شيئا خاصا، ولا سيما في الجزء الثاني سوف نحصل على حوالي أربعمائة الشقلبات مختلفة! لمجرد محاولة كل منهم ليس لديهم حتى للعب لساعات وأيام!
أما بالنسبة للجزء الثاني من فرصة للعب واي فاي في نفس الوقت أربعة منا، الأمر الذي يجعل من عملية ممتعة جدا ومثيرة. ويمكن للأصدقاء أن يكون شيئا من المعركة عن طريق رمي كرات الثلج عليهم أو مرفقا للتزلج البطريق في عام - سوف تفهم!
كما الجزء الثاني سوف تسمح لنا للحصول على بعيدا عن المنحدرات الثلجية ويكون في مجالين جديدين، على وجه الخصوص - الوادي الجوراسي مثلي الجنس، والأعاصير، وبطبيعة الحال، كل من المجالات الجديدة سوف تعطي الكثير من المرح.

خلاصة القول: المباراة كانت تستحق السلبيات - وليس أفضل (حتى الآن) لتحسين لأجهزة مختلفة، وهذا يمكن أن يسبب مشاكل. من ناحية أخرى، على عكس الجزء الأول من اللعبة هو خال تماما، ولكن يحتوي على دونات قليلا.

إعلان

تحميل التزلج سفاري 2 1.5.1279

الجديد في هذا الإصدار

Dusted off some cobwebs and defrosted some frozen yetis. No major changes, just making sure the penguins slide smoothly on the latest devices.

معلومات عامة

نص	1.5.1279 (201551279)
تحميل التسجيل	2023-09-30 19:10
حجم	112.8 MB
العربية	لا

متطلبات

الروبوت	5.1+
هندسة معمارية	ARM8 ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Ski Safari 2 1.5.4 / 2021-12-20

الجديد في هذا الإصدار

Bug fixes and tweaks.

معلومات عامة

نص	1.5.4 (201541275)
تحميل التسجيل	2021-12-20 19:45
حجم	87.83 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

READ_APP_BADGE

Ski Safari 2 1.5.4 / 2021-12-20

الجديد في هذا الإصدار

Bug fixes and tweaks.

معلومات عامة

نص	1.5.4 (201541275)
تحميل التسجيل	2021-12-20 19:46
حجم	89.38 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

READ_APP_BADGE

Ski Safari 2 1.5.1.1186 / 2017-04-16

الجديد في هذا الإصدار

Egg-cellent savings on all Easter items for a limited time only!

Have fun!

معلومات عامة

نص	1.5.1.1186 (151211186)
تحميل التسجيل	2017-04-16 06:44
حجم	62.16 MB
العربية	لا

متطلبات

الروبوت	4.1+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to request authentication tokens.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to request authentication tokens.

Allows the app to prevent the device from going to sleep.

Ski Safari 2 1.5.1.1186 / 2019-06-14

الجديد في هذا الإصدار

Egg-cellent savings on all Easter items for a limited time only!

Have fun!

معلومات عامة

نص	1.5.1.1186 (151141186)
تحميل التسجيل	2019-06-14 05:12
حجم	64.25 MB
العربية	لا

متطلبات

الروبوت	4.1+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to request authentication tokens.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to request authentication tokens.

Allows the app to prevent the device from going to sleep.

Ski Safari 2 1.5.0.1176 / 2016-12-01

الجديد في هذا الإصدار

Welcome to the holiday update. Jolly fat discounts on all festive items for a limited time only!

Winter is extra chilly at the North Pole, so rug up with new costumes for Sven and Evana made with real yeti fur*. Slip, slide and ride with style with the new icy skis, snowboard and snowmobile!

Happy Holidays!

* No yetis were harmed in the making of this update.

معلومات عامة

نص	1.5.0.1176 (150211176)
تحميل التسجيل	2016-12-01 10:24
حجم	62.38 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to request authentication tokens.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to request authentication tokens.

Allows the app to prevent the device from going to sleep.

Ski Safari 2 1.4.0.1166 / 2016-10-19

الجديد في هذا الإصدار

New spooky halloween costumes and snowboard now available!

SALE: Monster savings on all halloween items for a limited time only!

Bug fixes and tweaks:

- Removed microphone permission.

معلومات عامة

نص	1.4.0.1166 (140211166)
تحميل التسجيل	2016-10-19 07:46
حجم	60.18 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to request authentication tokens.

Allows the app to prevent the device from going to sleep.

record audio

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to request authentication tokens.

Allows the app to prevent the device from going to sleep.

record audio

Ski Safari 2 1.3.2.1103 / 2016-07-28

الجديد في هذا الإصدار

Bug fixes and tweaks.

معلومات عامة

نص	1.3.2.1103 (132211103)
تحميل التسجيل	2016-07-28 07:56
حجم	58.04 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Ski Safari 2 1.3.1.1099 / 2016-07-16

الجديد في هذا الإصدار

Squished some pesky space bugs!

Loony lunar update (1.3.0):

• Ski on the moon! It's out of this world!

• Explore underground moon bases and outrun a giant alien UFO!

• New space costumes, Plasma Blades, Solar Surfboard, Moon Buggy and more!

• Mirror mode: Beat challenges again while skiing backwards!

Have fun!

معلومات عامة

نص	1.3.1.1099 (131111099)
تحميل التسجيل	2016-07-16 21:17
حجم	57.67 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Ski Safari 2 1.2.6.0971 / 2017-11-25

الجديد في هذا الإصدار

Egg-cellent savings on all Easter items for a limited time only!

Have fun!

معلومات عامة

نص	1.2.6.0971 (126130971)
تحميل التسجيل	2017-11-25 18:34
حجم	68.27 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Ski Safari 2 1.2.6.0971 / 2016-04-19

الجديد في هذا الإصدار

Bug fixes and tweaks.

Have fun!

معلومات عامة

نص	1.2.6.0971 (126110971)
تحميل التسجيل	2016-04-19 03:23
حجم	61.24 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Ski Safari 2 1.2.5.0953 / 2016-03-18

معلومات عامة

نص	1.2.5.0953 (125110953)
تحميل التسجيل	2016-03-18 04:46
حجم	61.2 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Ski Safari 2 1.2.4.0929 / 2016-02-15

معلومات عامة

نص	1.2.4.0929 (124110929)
تحميل التسجيل	2016-02-15 03:46
حجم	60.84 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Ski Safari 2 1.2.3.0927 / 2016-02-07

معلومات عامة

نص	1.2.3.0927 (123110927)
تحميل التسجيل	2016-02-07 03:54
حجم	61.37 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Ski Safari 2 1.2.2.0919 / 2016-01-06

معلومات عامة

نص	1.2.2.0919 (122110919)
تحميل التسجيل	2016-01-06 03:46
حجم	60.01 MB
العربية	لا

متطلبات

الروبوت	4.0+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Ski Safari 2 1.2.0.0916 / 2015-12-13

معلومات عامة

نص	1.2.0.0916 (120110916)
تحميل التسجيل	2015-12-13 03:41
حجم	59.69 MB
العربية	لا

متطلبات

الروبوت	4.0+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to request authentication tokens.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to request authentication tokens.

Ski Safari 2 1.1.3.0839 / 2015-11-19

معلومات عامة

نص	1.1.3.0839 (11015)
تحميل التسجيل	2015-11-19 03:42
حجم	59.71 MB
العربية	لا

متطلبات

الروبوت	4.0+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Ski Safari 2 1.1.2.0831 / 2015-11-03

معلومات عامة

نص	1.1.2.0831 (11011)
تحميل التسجيل	2015-11-03 03:35
حجم	58.73 MB
العربية	لا

متطلبات

الروبوت	4.0+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Ski Safari 2 1.1.1.0825 / 2015-10-26

معلومات عامة

نص	1.1.1.0825 (11007)
تحميل التسجيل	2015-10-26 03:40
حجم	58.38 MB
العربية	لا

متطلبات

الروبوت	4.0+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Ski Safari 2 1.0.2.0800 / 2015-10-02

معلومات عامة

نص	1.0.2.0800 (7)
تحميل التسجيل	2015-10-02 11:20
حجم	48.3 MB
العربية	لا

متطلبات

الروبوت	4.0+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

جميع التطبيقات Sleepy Z Studios في dev.mob-core.com

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك, واسمحوا لنا أن نعرف

2015/10/06 07:18

ألعاب ذات صلة:

حزب الجليد

4.3 (627)

آرتشر بطل

4.2 (37)

EA SPORTS ™ UFC

4.2 (116)

XField الألوان 2

4.1 (128)

ميادين المعارك

3.8 (125)

4.8 (116)

2D الهاوية

4.7 (73)

أرنب الغابة تشغيل

4.6 (51)

طيور غاضبة العمل!

4.6 (15)

4.6 (27)

الكويكبات الواقع المعزز

4.6 (16)

4.6 (19)

© 2011-2024 mob-core.com