ألعاب للأندرويد / على الانترنت /
3.7 (14)
مساحة جت
الاطلاع على ملفات أبك المتاحة

وصف:

الفضاء يطير - رماية هو كلاسيكي حقيقي. والناس يريدون دائما للطيران والفضاء سنحت لهم، ثم يأتي كل ذلك معا. والحقيقة هي في هذا السياق أن هذه الألعاب لفترة طويلة لا أحد يبحث، دعونا الآن جميع الرسومات وقصة، وفرص ... لذا أقترح أن نرى ما يمكن أن تعطينا مطوري المتطرفة للمطورين، الذي أعد المشروع القادم له لالروبوت.

اذا كان هناك من ينتظر المباراة القادمة حول الفضاء مشهد الفضاء حاد - أجبروا على قلب لك، لا مؤامرة في اللعبة هناك. كل ما هو عليه - مجموعة من بطاقات والمركبات والخادم الذي يمكنك محاربة لاعبين آخرين، وحلقت على سفينته، ​​ضخه، أو محاولة لانقاذ ما يصل لجديد، وأكثر قوة. لاعبين آخرين هي بالضبط نفس المشكلة، لذلك سيكون من الصعب جدا، ولكن المنافسة العالية يضيف الفائدة واللعبة ملحمية فقط. وعلاوة على ذلك، أنت لا نقدم نوعا من الحملة التي يمكن أن تنتقل للتعامل مع إدارة ومع الأسلحة رمي في الواقع كنت على حق في ساحة المعركة، ولكن هناك نوعا حقا بها لنفسك؛)

تعميم قليلا، وخاصة ألعاب الفضاء جت:


كما مساوئ هذه اللعبة، أيضا، لديهم ما يقولونه، وهما:


النتيجة: من ناحية "الفضاء" الشخصية في هذه اللعبة ليست في مطلق النار على الانترنت الأكثر شيوعا في الفضاء مع سفن الفضاء، من ناحية أخرى، فإن اللعبة هو الادمان حقا ومثيرة جدا للاهتمام من الناحية العملية.

جنبا إلى جنب مع لعبة تحتاج إلى تحميل ذاكرة التخزين المؤقت واستخراج إلى دليل: SD / الروبوت / OBB

إعلان

تحميل مساحة جت 3.01.2

مساحة جت

تقدم
الجديد في هذا الإصدار
Minor fixes
معلومات عامة
نص 3.01.2 (203012)
تحميل التسجيل 2023-12-11 01:30
حجم 36.81 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to read the contents of your USB storage.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to read the contents of your USB storage.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

FOREGROUND_SERVICE
Space Jet 3.00.2 / 2021-10-07

مساحة جت

تقدم
الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
Fixed problems with binding VK profile
معلومات عامة
نص 3.00.2 (203002)
تحميل التسجيل 2021-10-07 02:36
حجم 31.73 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

FOREGROUND_SERVICE
Space Jet 3.01.2 / 2023-12-11

مساحة جت

تقدم
الجديد في هذا الإصدار
Minor fixes
معلومات عامة
نص 3.01.2 (103012)
تحميل التسجيل 2023-12-11 01:30
حجم 35.33 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to read the contents of your USB storage.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to read the contents of your USB storage.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

FOREGROUND_SERVICE
Space Jet 3.00.2 / 2021-10-07

مساحة جت

تقدم
الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
Fixed problems with binding VK profile
معلومات عامة
نص 3.00.2 (103002)
تحميل التسجيل 2021-10-07 02:36
حجم 30.68 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

FOREGROUND_SERVICE
Space Jet 2.60 / 2017-04-19

مساحة جت

تقدم
الجديد في هذا الإصدار
Good day Pilots!
A new big update for Space Jet!
So what's new?
*Aiming and shooting were reworked
*New maps: Station and Infinity
*Reworked maps: Aurora and Abyss
*All decals were reworked
*Crash problems were solved
*Added consumable supplies
*Now you are able to give a command in the battle
*Video streaming/recording
*Spaceships now have their own crash versions
*Upgrades now have visual side
*Solved snapping to objects
*Solved camera issues
معلومات عامة
نص 2.60 (260)
تحميل التسجيل 2017-04-19 06:52
حجم 18.75 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.
Space Jet 2.18 / 2016-07-06

مساحة جت

تقدم
الجديد في هذا الإصدار
Bug fixes
Added:
New feature of reconnection into the battle.
New feature of battle delay (The fuel is not wasting before a necessary amount of players enter the battle).
New feature of online monitoring the amount of players at maps.
Improved:
Improved the display of rating after a battle.
معلومات عامة
نص 2.18 (218)
تحميل التسجيل 2016-07-06 04:41
حجم 18.71 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.
Space Jet 2.03 / 2016-04-03

مساحة جت

تقدم
معلومات عامة
نص 2.03 (203)
تحميل التسجيل 2016-04-03 02:53
حجم 17.71 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.
Space Jet 1.99 / 2016-02-23

مساحة جت

تقدم
معلومات عامة
نص 1.99 (199)
تحميل التسجيل 2016-02-23 03:53
حجم 17.03 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.
Space Jet 1.97 / 2016-02-07

مساحة جت

تقدم
معلومات عامة
نص 1.97 (197)
تحميل التسجيل 2016-02-07 03:45
حجم 17.02 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.
Space Jet 1.85 / 2015-12-29

مساحة جت

تقدم
معلومات عامة
نص 1.85 (185)
تحميل التسجيل 2015-12-29 03:46
حجم 17.06 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.
Space Jet 1.84 / 2015-12-13

مساحة جت

تقدم
معلومات عامة
نص 1.84 (184)
تحميل التسجيل 2015-12-13 14:13
حجم 16.93 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.
تحميل مخبأ kash_Space_Jet.zip
حجم 67.58 MB
تحميل التسجيل 2015-12-13 14:16

مساحة جت

تقدم
جميع التطبيقات XDEVS LTD في dev.mob-core.com

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك, واسمحوا لنا أن نعرف

الفضاء مطلق النار
2015/12/15 08:10
ألعاب ذات صلة:
الكويكبات الواقع المعزز
4.6 (16)
نجمة الأفق
4.2 (78)
نجمة المدافع 4
4.2 (57)
BlastZone 2
4.1 (28)
Dodonpachi القيامة
3.9 (31)
ARC السرب: مسترجع
3.9 (117)
إضراب القطاع
3.9 (31)
كعكة الفضاء
3.9 (23)
سيلا الفضاء القراصنة
3.9 (21)
الغريبة المطحنة برو
3.8 (59)
حر النار - معارك
4.7 (23)
النظام والفوضى 2: التكفير
4.5 (43)
© 2011-2024 mob-core.com