3.4 (29)

وصف:

كان انصهار لعبة الحرب على تطوير الروبوت لاول مرة من 37GAMES، وأنها أعدت. لا بد لي من القول، أنه من المعتاد بالنسبة لنا اطلاق النار بحيث لا عالم مفتوح، حرية الحركة على المواقع والامتيازات الأخرى من أول شخص الكلاسيكي مطلق النار، ولكن لديها الألعاب والمعتاد للمزايا الإطارات، التي سأحاول ان اقول لكم.

مؤامرة اللعبة، كما جرت العادة، تدور حول الأحداث الرهيبة التي المكالمة الأصلية الصعب، ولكنه كما هو. قد اصيبوا بالعدوى البشرية مع فيروس خطير أسفر عن مقتل أكثر من سكان العالم لا يريد أن يتوقف عند هذا الحد، ولكن كان هناك نوع من الشركة التي قررت لإيجاد علاج وعلاج جميع. هذا فقط للحصول على أفضل بدلا من كل المصابين بدأت تتحول إلى وحوش، وسوف تؤدي إلى تفاقم الوضع على الأرض فقط. ولكن هناك أمل، حيث الاستغناء عنها؟
آمل أن يكون هذا هو مجرد فإن المقاومة تكون في طليعة وعليك قطع طريق الطريق إلى مستقبل أكثر إشراقا من خلال حشود من الوحوش وممثلي الشركات لحماية أبحاثهم والتنمية.

اللعب.
ما الجديد ان اقول لكم عن اطلاق النار؟ في عام - لا شيء. موقع جميل، وإطلاق النار الفيزياء جيدة، ومجموعة متنوعة من المعارضين، مجموعة واسعة من الأسلحة، بما فيها قذائف صاروخية وقوية. سوف تتحرك شخصيتك من الغلاف إلى الغلاف (وحدك، دون مساعدتكم)، وسوف تبادل لاطلاق النار. ما كنا نود - بالإضافة إلى وحوش لديها لتدمير الدبابات واسقاط طائرات الهليكوبتر ومعدات أخرى للتعامل مع أن المطورين لا يندم عليه المضافة. أيضا، قد أعرب عن أسفه للمطورين تقم بإضافة القدرة على تحسين أسلحتها ودونات، كما يعيش هذين الكيانين دون الآخر لا يمكن أن يكون، ومن الجدير بالذكر هنا أن دونات الصلب ...

يتميز الحرب فيوجن لandroda:


العيوب:


خلاصة القول: ممثل جيد من هذا النوع، مما يبرر تماما لتوقعات المفروضة عليه، والشيء الوحيد الذي يحبط - دونات، ولكن المشجعين من هذا النوع لا تعتاد على ذلك.

جنبا إلى جنب مع لعبة تحتاج إلى تحميل ذاكرة التخزين المؤقت واستخراج إلى دليل: SD / الروبوت / OBB

إعلان

تحميل الحرب الانصهار 0.9.7.1

الجديد في هذا الإصدار
1. A new type of match called Bio-Shock is available in PVP mode.
2. Adjustment on parts/add on system. (Old parts owned by players will be recycled, gold and diamond compensation will be sent via mail.)
3. Armory optimization, items will now be organized in a better way.
4. Parts will now appear as part of the rewards for campaign stages.
5. You may now buy Deluxe Boxes (sometimes referred to as “10X Draw”/“Deca-Draw”) with gold.
6. Optimization on weapon recoil and rate of fire.
معلومات عامة
نص 0.9.7.1 (907001)
تحميل التسجيل 2016-07-12 09:16
حجم 25.46 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM7 ARM6 x86
تحقق التطبيق
يتم إيداع الملف
إذن

INSTALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

MOUNT_UNMOUNT_FILESYSTEMS

RESTART_PACKAGES

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to write to the USB storage.

Allows the app to change the current configuration, such as the locale or overall font size.

Allows the app to end background processes of other apps. This may cause other apps to stop running.

record audio

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

INSTALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

MOUNT_UNMOUNT_FILESYSTEMS

RESTART_PACKAGES

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to write to the USB storage.

Allows the app to change the current configuration, such as the locale or overall font size.

Allows the app to end background processes of other apps. This may cause other apps to stop running.

record audio

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

معلومات عامة
نص 0.9.1.1 (901001)
تحميل التسجيل 2016-07-06 04:19
حجم 24.86 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM7 ARM6 x86
تحقق التطبيق
يتم إيداع الملف
إذن

INSTALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

MOUNT_UNMOUNT_FILESYSTEMS

RESTART_PACKAGES

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to write to the USB storage.

Allows the app to change the current configuration, such as the locale or overall font size.

Allows the app to end background processes of other apps. This may cause other apps to stop running.

record audio

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

INSTALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

MOUNT_UNMOUNT_FILESYSTEMS

RESTART_PACKAGES

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to write to the USB storage.

Allows the app to change the current configuration, such as the locale or overall font size.

Allows the app to end background processes of other apps. This may cause other apps to stop running.

record audio

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

معلومات عامة
نص 0.8.8.1 (808001)
تحميل التسجيل 2016-05-22 02:57
حجم 21.63 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

INSTALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

MOUNT_UNMOUNT_FILESYSTEMS

RESTART_PACKAGES

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to write to the USB storage.

Allows the app to change the current configuration, such as the locale or overall font size.

Allows the app to end background processes of other apps. This may cause other apps to stop running.

record audio

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

INSTALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

MOUNT_UNMOUNT_FILESYSTEMS

RESTART_PACKAGES

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to write to the USB storage.

Allows the app to change the current configuration, such as the locale or overall font size.

Allows the app to end background processes of other apps. This may cause other apps to stop running.

record audio

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

معلومات عامة
نص 0.8.1.1 (801001)
تحميل التسجيل 2016-05-14 02:50
حجم 21.63 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

INSTALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

MOUNT_UNMOUNT_FILESYSTEMS

RESTART_PACKAGES

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to write to the USB storage.

Allows the app to change the current configuration, such as the locale or overall font size.

Allows the app to end background processes of other apps. This may cause other apps to stop running.

record audio

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

INSTALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

MOUNT_UNMOUNT_FILESYSTEMS

RESTART_PACKAGES

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to write to the USB storage.

Allows the app to change the current configuration, such as the locale or overall font size.

Allows the app to end background processes of other apps. This may cause other apps to stop running.

record audio

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

معلومات عامة
نص 0.7.1.3 (701003)
تحميل التسجيل 2016-03-27 02:44
حجم 21.53 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

INSTALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

MOUNT_UNMOUNT_FILESYSTEMS

RESTART_PACKAGES

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to write to the USB storage.

Allows the app to change the current configuration, such as the locale or overall font size.

Allows the app to end background processes of other apps. This may cause other apps to stop running.

record audio

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

INSTALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

MOUNT_UNMOUNT_FILESYSTEMS

RESTART_PACKAGES

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to write to the USB storage.

Allows the app to change the current configuration, such as the locale or overall font size.

Allows the app to end background processes of other apps. This may cause other apps to stop running.

record audio

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

معلومات عامة
نص 0.6.1.1 (601001)
تحميل التسجيل 2016-01-31 03:36
حجم 21.44 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

INSTALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

MOUNT_UNMOUNT_FILESYSTEMS

RESTART_PACKAGES

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to write to the USB storage.

Allows the app to change the current configuration, such as the locale or overall font size.

Allows the app to end background processes of other apps. This may cause other apps to stop running.

record audio

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

INSTALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

MOUNT_UNMOUNT_FILESYSTEMS

RESTART_PACKAGES

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to write to the USB storage.

Allows the app to change the current configuration, such as the locale or overall font size.

Allows the app to end background processes of other apps. This may cause other apps to stop running.

record audio

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

معلومات عامة
نص 0.5.30.3 (530003)
تحميل التسجيل 2015-12-30 13:25
حجم 21.04 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

INSTALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

MOUNT_UNMOUNT_FILESYSTEMS

RESTART_PACKAGES

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to write to the USB storage.

Allows the app to change the current configuration, such as the locale or overall font size.

Allows the app to end background processes of other apps. This may cause other apps to stop running.

record audio

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

INSTALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

MOUNT_UNMOUNT_FILESYSTEMS

RESTART_PACKAGES

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to write to the USB storage.

Allows the app to change the current configuration, such as the locale or overall font size.

Allows the app to end background processes of other apps. This may cause other apps to stop running.

record audio

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

حجم 281.6 MB
تحميل التسجيل 2015-12-30 13:30

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك, واسمحوا لنا أن نعرف

2016/01/02 09:23
ألعاب ذات صلة:
© 2011-2024 mob-core.com