لعبة جنون التنفيذ المباشر 2 هو منهاج الممرات لالروبوت حيث كل شيء على مخطط الكلاسيكية، حسنا، كل شيء تقريبا :) إعداد عبة GameGild في الشركة وهذا هو المشروع الثالث مخصص لجميع نفس الحرف. من جانب الطريق، والجزء الأول من اللعبة باعت أكثر من 5 ملايين دولار، وهو تماما نتيجة جيدة للمطور شركة صغيرة، ولكن ذلك ليس من المستغرب أن لعبة كبيرة!
اللعبة الكلاسيكية هي أن الطابع الرئيسي هو خطف صديقته! الوحش غاضب يقتل ذلك، ولدينا للحصول على ظهرها، وهو ركيك جدا. على أي حال، فإنه ليس كل ما هو هناك، وخاصة إذا كنت ضبطها بالفعل إلى الموسيقى الكلاسيكية في أنقى صورها. لتبدأ هناك دم، والوقت، لأن لدينا بطل يفسد في أي مكان ذهب، وليس لأنه سفاح صعبة وأن تقتل جميع، ولكن ببساطة لأنه ينبع من ذلك؟ أم أنها ترسم ... من الصعب القول، ولكن أي المكان الذي سوف يتحول ركض مبلغ لذيذا من السائل الأحمر. وعلاوة على ذلك، إذا كنت الإغارة على عقبة القادمة في شكل منشار، ثم مرة أخرى لرؤية الدم وقطع من البطل الخاص بك، لذلك لم يعد التطبيق ضعيف! ولكن الشيء الأكثر أهمية هنا اللعب، وهو ذكي جدا يجمع بين التعقيد، وديناميات، والحاجة إلى التفكير والتذكر، وكذلك بعض رقائق أخرى. مستويات هناك مبنية من الصعب بعض الشيء، في مكان ما تحتاج إلى الصعود، في مكان ما أن يذهب إلى أسفل، وأحيانا تضطر إلى العودة وهلم جرا، مع وزادت كل مستوى جديد ببساطة في حجم القديم فقط دائما بإضافة شيء ما، حتى لا يكون هناك شيء يثير الدهشة أن مستوى يصبح أكثر وأكثر في كل مرة. والحصول على مستويات أصعب، لأن هناك المزيد من الفخاخ والمزيد من الاسرار، حتى أنه في بعض الأحيان من الصعب أن نفهم إلى أين أذهب، والسهم يشير إلى أن هذا لا تساعد كثيرا لك.
الميزات:
الكلاسيكية التي جعلت من ملحمة ودموية
كثير من المزالق والأخطار، كل مشهد قاس جدا
5 فصول ومستويات 75
القصة الرائعة التي سوف تدهش لكم مع المفاجآت
معارك رئيسه معقدة للغاية
الصوت كبيرة
تصنيفات أفضل اللاعبين وإحصاءات لكل مستوى
الكثير من الأسرار، التي قد لا يكون لاحظت
المطورين موقفا مسؤولا جدا لهذا المشروع، وسهلة للذهاب إلى الحوار
ألعاب العيوب:
صغيرة دونات
خلاصة القول: لعبة جنون التنفيذ المباشر 2 هو platforming من الدرجة الأولى أكثر عن اللعبة وليس لديهم ما يقولون! لذلك، تحميل البرنامج مجانا والتمتع به! وحتى لا تفكر في تجاهل هذا المشروع!
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to read the contents of your USB storage.
ACCESS_ADSERVICES_AD_ID
ACCESS_ADSERVICES_ATTRIBUTION
ACCESS_ADSERVICES_TOPICS
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to read the contents of your USB storage.
ACCESS_ADSERVICES_AD_ID
ACCESS_ADSERVICES_ATTRIBUTION
ACCESS_ADSERVICES_TOPICS
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
QUERY_ALL_PACKAGES
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
QUERY_ALL_PACKAGES
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
QUERY_ALL_PACKAGES
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
QUERY_ALL_PACKAGES
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
REQUEST_INSTALL_PACKAGES
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to control the vibrator.
REQUEST_INSTALL_PACKAGES
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.