4.6 (4)
اريناس التنفيذ المباشر جنون

وصف:

لعبة جنون التنفيذ المباشر اريناس هو منهاج لالروبوت حيث ستجد الكثير من الدماء، والكثير من الدم، لذلك لا ينبغي أن نندهش، سيكون هناك دماء في كل مكان، حتى شخصيتك يترك أثرا من الدماء، يمكن أن تكون معه على أن شيئا ما كان خطأ؟ ومع ذلك، إذا نظرتم، هو الجزء الثالث من سلسلة من الألعاب، فضلا عن الأولين، ومطوري النقابة اللعبة، كل من نفس الطابع وتراجع شعبية، للأسف نعم.

وكان الجزء الأول على الأقل 2 مرات أكثر شعبية من الثانية، والذي ينتظر هذا السيناريو - من الصعب القول، ولكن إذا كان من المنطقي أن السبب شيء جيد وهذا هو السبب. كما كان من قبل، بالمناسبة، كان الجزء الأخير من هذا الاستعراض أن يكون على موقعنا على الانترنت، وسوف تحتاج لإنقاذ حبيبته، والقفز على العالم مسطح كامل من مجموعة متنوعة من الفخاخ الدموية. كل شيء، ولكن هذا هو السؤال - ما هي هذه اللعبة مختلفة جوهريا عن القسمين الأولين؟ أو من أول واحد يختلف عن الآخر؟ في الواقع، انها مجرد مستوى جديد، لا أكثر من ذلك، ولكن بموضوعية، وكان ممكن لجعلها في التحديثات إلى الجزء الأول والخروج مع أي شيء، لماذا إعادة اختراع العجلة؟
ومع ذلك، وصناع السياسات هو هذا، حتى أن كل ما ينطبق على الجزء الأول أو الثاني - الفعلي وفي الثالثة، مع كل نفس إيجابيات وسلبيات، مجرد مجموعة جديدة من مستويات ...

هذا مجرد استدعاء لعبة «اريناس» قد يكون من المفيد في حين أن نفكر في كيفية إضافة متعددة أو أنه لا يستحق ذلك؟ لأنه من شأنه أن يعطي اللعبة الكثير من لحظات ممتعة وإضافة إلى متعة!

الميزات:


ألعاب العيوب:


خلاصة القول: جنون التنفيذ المباشر اريناس تقدم أساسا لنا إمكانية لتمرير المستويات أسرع من لاعبين آخرين، ولكن ما زلت آمل أن الكثير من الناس سوف تكون قادرة على توزيع الأفكار العظيمة ويكون الجزء التالي سوف تعطينا شيئا جديدا تماما!

إعلان

تحميل اريناس التنفيذ المباشر جنون 1.2.8

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.2.8 (1002008)
تحميل التسجيل 2023-09-23 18:25
حجم 46.39 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.2.7 (1002007)
تحميل التسجيل 2022-09-23 11:57
حجم 39.57 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- fixed crash at android 12
معلومات عامة
نص 1.2.6 (1002006)
تحميل التسجيل 2022-07-17 02:39
حجم 36.19 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.2.5 (1002005)
تحميل التسجيل 2022-02-04 06:40
حجم 34.08 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.2.4 (1002004)
تحميل التسجيل 2021-10-09 04:38
حجم 34.72 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- fixed problem with install/update app
معلومات عامة
نص 1.2.3 (1002003)
تحميل التسجيل 2021-05-06 01:34
حجم 30.71 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

QUERY_ALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

QUERY_ALL_PACKAGES

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.2.2 (1002002)
تحميل التسجيل 2021-02-27 02:01
حجم 30.71 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

QUERY_ALL_PACKAGES

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

QUERY_ALL_PACKAGES

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.2.1 (1002001)
تحميل التسجيل 2020-07-14 03:13
حجم 28.02 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.2.0 (1002000)
تحميل التسجيل 2020-03-06 10:10
حجم 29.69 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.1.9 (1001009)
تحميل التسجيل 2020-03-06 10:10
حجم 28.47 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.1.9 (1001009)
تحميل التسجيل 2019-06-04 21:37
حجم 28.47 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.1.5 (1001005)
تحميل التسجيل 2019-03-08 14:47
حجم 29.47 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- small fixes
- added Data Protection Consent
معلومات عامة
نص 1.1.4 (1001004)
تحميل التسجيل 2018-09-22 19:16
حجم 22.4 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.1.2 (1001002)
تحميل التسجيل 2018-06-10 20:57
حجم 22.87 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.1.1 (1001001)
تحميل التسجيل 2018-06-03 11:05
حجم 23.03 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.0.6 (1000006)
تحميل التسجيل 2018-01-18 18:02
حجم 21.37 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7 ARM6 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.0.5 (1000005)
تحميل التسجيل 2017-02-22 09:44
حجم 17.86 MB
العربية لا
متطلبات
الروبوت 3.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.0.4 (1000004)
تحميل التسجيل 2016-12-28 08:22
حجم 17.98 MB
العربية لا
متطلبات
الروبوت 3.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- small fixes
معلومات عامة
نص 1.0.3 (1000003)
تحميل التسجيل 2016-12-10 10:41
حجم 17.98 MB
العربية لا
متطلبات
الروبوت 3.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- corrections level 2, level 5
معلومات عامة
نص 1.0.2 (1000002)
تحميل التسجيل 2016-09-19 07:02
حجم 18.69 MB
العربية لا
متطلبات
الروبوت 3.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- small corrections 5th level
معلومات عامة
نص 1.0.1 (1000001)
تحميل التسجيل 2016-09-13 07:39
حجم 18.68 MB
العربية لا
متطلبات
الروبوت 3.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

جميع التطبيقات game guild في dev.mob-core.com

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك, واسمحوا لنا أن نعرف

2016/09/16 08:37
ألعاب ذات صلة:
© 2011-2024 mob-core.com