0 (0)
غيبوبة اطلاق النار سباق مغامرة

وصف:

لعبة غيبوبة اطلاق النار سباق مغامرة هو عمل لالروبوت التي سوف تجد نفسك مرة أخرى في براثن نهاية العالم، التي اجتاحت العالم بأسره، ولكن لديك سيارة كبيرة التي يمكن أن تمتد وجودك، لعجلة له فقط لنا ويجب أن أذهب! أعده الاستوديو لعبة صغيرة مختبر للإنتاج، والمشاريع التي لها كتلة، ولكن إذا كانت مثل هذه الخطة، يصبح من الواضح لماذا قبل اجتمعنا معهم.
على الفور ومن الجدير بالذكر أن هذه الفكرة قد تم بالفعل، وحتى تنفذ مشروع بشعبية كبيرة، وأسماء التي ربما كنت قد سمعت: الكسول رحلة برية، وكسب للموت، الكسول دربي، الكسول الطريق 3D والبعض الآخر، هناك دائما الملايين من التنزيلات وليس فقط كل لعبة لديه ميزاته الفريدة واللعب ممتازة، ولكن ما ينتظرنا هنا؟

تبدأ اللعبة في الشيء نفسه - اختيار واحد من أروع السيارات (أو الدبابات ... هناك مختلفة) وانطلقوا في رحلة! ولكن هنا شيء غريب، لا تأتي عبر هذا بسرعة جدا، وبعض الكسالى ويمكن طحنها وتحويلها إلى الوحل الأخضر، وبعض سحق ليس فقط لا تعمل، وسوف يسقط أنت مثل ريشة! ونتيجة لذلك، فإن الفيزياء في اللعبة ليست مفقودة فقط، أنها تشبه لعبة في يد طفل ... أعتقد الطفل فقط وغير قادرة على تقييم أي شخص آخر. ونتيجة لذلك، يتحول اللعب إلى ألم خفيف، لأن بعض الكسالى بحاجة إلى أن تسقى قاذف اللهب، بعض الضغط، مع أرباب العمل قصة مختلفة تماما، ولكن إذا كنت ترغب في الحصول على بعض المتعة - يمكنك تحميل اللعبة ومحاولة الحصول على واحد منهم.)

الميزات:


ألعاب العيوب:

النتيجة: ربما، لعبة الكسول اطلاق النار سباق مغامرة غير مناسبة للأطفال الذين ليس لديهم بعد مطالبات لتبريد الفيزياء في المباريات، كل ما تبقى منه، في أحسن الأحوال، أن يكون قادرا على الضحك، في محاولة ذلك!

إعلان

تحميل غيبوبة اطلاق النار سباق مغامرة 3.59

معلومات عامة
نص 3.59 (56001)
تحميل التسجيل 2018-08-29 17:06
حجم 52.16 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

معلومات عامة
نص 3.53 (50001)
تحميل التسجيل 2018-08-13 05:46
حجم 51.99 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

معلومات عامة
نص 3.46 (43001)
تحميل التسجيل 2018-07-02 17:01
حجم 51.51 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

معلومات عامة
نص 3.41 (38001)
تحميل التسجيل 2018-05-31 19:01
حجم 50.73 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

معلومات عامة
نص 3.39 (36001)
تحميل التسجيل 2018-05-20 22:35
حجم 50.1 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

الجديد في هذا الإصدار
## v3.31

- Bugfixes.
معلومات عامة
نص 3.31 (28001)
تحميل التسجيل 2018-04-06 16:53
حجم 58.2 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

READ_APP_BADGE

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

READ_APP_BADGE

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

الجديد في هذا الإصدار
## v3.31

- Bugfixes.
معلومات عامة
نص 3.31 (28000)
تحميل التسجيل 2018-03-17 23:42
حجم 57.65 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

READ_APP_BADGE

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

READ_APP_BADGE

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

الجديد في هذا الإصدار
## v3.29
- Very important bugfix: fixed a lot of random game crashes.
معلومات عامة
نص 3.29 (26000)
تحميل التسجيل 2018-03-06 16:20
حجم 57.13 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

الجديد في هذا الإصدار
## v3.24
- Bugfixes.
معلومات عامة
نص 3.24 (21001)
تحميل التسجيل 2018-02-04 13:46
حجم 56.84 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

الجديد في هذا الإصدار
## v3.21
There are some big changes!
We have introduced a subscription model to our games! That means that for
a weekly, monthly or quarterly subscription price you can access all features
with no ads in all of our games!
Hope you like it and thank you for supporting us!
Make sure to send your feedback about this new feature to support@tinylabproductions.com
Thanks!
معلومات عامة
نص 3.21 (18000)
تحميل التسجيل 2018-01-12 19:07
حجم 55.67 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

READ_APP_BADGE

الجديد في هذا الإصدار
## v3.19
- Bugfixes.
معلومات عامة
نص 3.19 (16000)
تحميل التسجيل 2017-12-13 18:17
حجم 55.44 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

الجديد في هذا الإصدار
### v3.16
- Bug fixes.
- Reduced battery usage.
معلومات عامة
نص 3.16 (13000)
تحميل التسجيل 2017-12-02 15:35
حجم 55.52 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

الجديد في هذا الإصدار
### v3.15 ###
Added mini games to the game! Enjoy yourself with these games:
- Match Shapes
- Memory Game
- Balloon Popping
- Puzzle
- Coloring Game
Have fun!
معلومات عامة
نص 3.15 (12001)
تحميل التسجيل 2017-11-16 07:45
حجم 56.03 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

الجديد في هذا الإصدار
### v3.11
- v3.10 was way larger than it should have been. v3.11 brings the app size down.
### v3.10 ###
- Reduced memory usage of the game. It will now run smoother and on more devices.
- Enabled game to run with reduced graphics quality on low-end devices where it previously crashed.
معلومات عامة
نص 3.11 (8001)
تحميل التسجيل 2017-10-11 07:28
حجم 53.03 MB
العربية لا
متطلبات
الروبوت 4.2+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

معلومات عامة
نص 3.6 (6126)
تحميل التسجيل 2017-09-24 10:52
حجم 49.45 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

معلومات عامة
نص 3.4 (6124)
تحميل التسجيل 2017-09-14 10:28
حجم 45.97 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

الجديد في هذا الإصدار
- Fix a case when the game froze after showing a video ad.
- Better error tracking will help us to fix bugs in the game.
معلومات عامة
نص 3.1 (6121)
تحميل التسجيل 2017-08-30 12:01
حجم 46.14 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

معلومات عامة
نص 1.28 (6029)
تحميل التسجيل 2017-08-05 09:24
حجم 45.68 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

معلومات عامة
نص 1.27 (6028)
تحميل التسجيل 2017-07-28 21:09
حجم 45.61 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

الجديد في هذا الإصدار
- Fixed bugs in game analytics.
معلومات عامة
نص 1.25 (6026)
تحميل التسجيل 2017-07-12 23:04
حجم 44.62 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

معلومات عامة
نص 1.24 (6025)
تحميل التسجيل 2017-07-06 21:47
حجم 44.62 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

معلومات عامة
نص 1.20 (6021)
تحميل التسجيل 2017-06-19 15:45
حجم 43.95 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

معلومات عامة
نص 1.17 (6018)
تحميل التسجيل 2017-06-04 07:13
حجم 43.06 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

الجديد في هذا الإصدار
- Less memory usage.
- Improved network reliability.
- Mark which games are new in more games panel.
معلومات عامة
نص 1.16 (6017)
تحميل التسجيل 2017-05-22 17:24
حجم 43.6 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

معلومات عامة
نص 1.13 (6014)
تحميل التسجيل 2017-04-07 08:10
حجم 42.45 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

معلومات عامة
نص 1.12 (6013)
تحميل التسجيل 2017-03-31 09:32
حجم 41.79 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

معلومات عامة
نص 1.11 (6012)
تحميل التسجيل 2017-02-25 12:40
حجم 42.34 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

معلومات عامة
نص 1.10 (6011)
تحميل التسجيل 2017-02-19 08:42
حجم 41.34 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

معلومات عامة
نص 1.9 (6010)
تحميل التسجيل 2017-02-10 10:28
حجم 41.28 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

معلومات عامة
نص 1.8 (6009)
تحميل التسجيل 2017-01-31 08:26
حجم 47.24 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

معلومات عامة
نص 1.4 (6005)
تحميل التسجيل 2017-01-16 08:31
حجم 38.43 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

معلومات عامة
نص 1.3 (6004)
تحميل التسجيل 2016-12-07 10:49
حجم 38.29 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

معلومات عامة
نص 1.2 (6003)
تحميل التسجيل 2016-11-29 11:38
حجم 38.45 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك, واسمحوا لنا أن نعرف

2016/12/03 08:34
ألعاب ذات صلة:
© 2011-2024 mob-core.com