4.7 (4)

وصف:

لعبة Paper.io مشروع جديد على الانترنت من قبل استوديو الفودو، ومشروع مثير للاهتمام بشكل فريد لأنه يشبه بشدة ضرب في العام الماضي - Agar.io، وانها جيدة جدا، وخصوصا في ظل حالة أن اللعبة لديها كمية معينة من الأصالة وبطبيعة الحال، والإثارة، التي تتميز معظم هذه الألعاب!

هذه اللعبة هو للوهلة الأولى قد يبدو غريبا، ولكن في دقائق معدودة واثنين من الهزائم لك بسرعة معرفة كل شيء. ومع ذلك، وستعد لكم.)
كما Agar.io، الملعب هو نوع من المنطقة المحظورة، وهو ما يصل الى 5 لاعبين دفعة واحدة. هدفك - لالتقاط أكبر قدر من الأراضي، ويمكن أن يتم ذلك بكل بساطة. البطل هو مكعب، والتي تقوم بنقل تمتد الشريط، أو ذيل، كما كنت واضحا. يختلف من المعارضين شئت اللون والاسم فقط، والتي أنفسهم أن تصل. رسم مربع وعبور "ذيل" ستحصل على جزء من الأراضي التي سوف تتحول لونك ويعرض المنطقة التي كنت قد اتخذت في الإحصاءات (كنسبة مئوية). حتى هنا طريقة بسيطة تحتاج لالتقاط أكبر قدر من الأراضي، ومع ذلك، ليست بهذه البساطة كما قد يبدو. سوف خصومك التعامل أيضا مع الاستيلاء على الأراضي، ينتصر لك بما في ذلك، ولكن الخطر الأكبر يكمن في حقيقة أنه إذا كان شخص يأتي إلى المعارضين الذيل الخاص بك حتى كنت قد أغلقت - سوف يموت، وسوف تضطر إلى البدء من جديد.
يمكنك اختيار اثنين من استراتيجيات مختلفة جدا - بدقة الفوز قطع صغيرة من الساحة، الذي هو موثوق بها للغاية، إلا أن التأثير المطلوب يضطرون إلى السفر وقتا طويلا، أو في خطر، يمكنك محاولة الاستيلاء على مساحة كبيرة حيث أسرع بكثير سوف تقودك إلى منصب قيادي، ولكن أيضا فرصة أن تدمر، أيضا، زيادة كبيرة، حتى تقرر لنفسك؛)

الميزات:


خلاصة القول: على عكس Agar.io هذه اللعبة هو أسهل قليلا، لأن الملعب خمسة لاعبين وحتى البدء من نقطة الصفر، لديك فرصة متساوية مع الآخرين، لذلك إذا كنت ترغب في منافسة مع لاعبي ريال مدريد - دائما تحميل ورقة اللعبة. الإعلام والتوعية، وهذا على ما يرام!

إعلان

تحميل Paper.io 4.2.2

الجديد في هذا الإصدار
- `New UI and multiple fixes
معلومات عامة
نص 4.2.2 (110)
تحميل التسجيل 2023-03-05 20:22
حجم 99.22 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
- `New UI and multiple fixes
معلومات عامة
نص 4.2.1 (108)
تحميل التسجيل 2022-12-06 00:58
حجم 95.58 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
- `New UI and multiple fixes
معلومات عامة
نص 4.1 (103)
تحميل التسجيل 2022-07-17 02:35
حجم 93.11 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
- Minor fixes
معلومات عامة
نص 3.7.12 (90)
تحميل التسجيل 2022-04-14 12:36
حجم 68.75 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
- Minor fixes
معلومات عامة
نص 3.7.12 (90)
تحميل التسجيل 2022-04-14 12:36
حجم 68.79 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
- Minor fixes
معلومات عامة
نص 3.7.12 (90)
تحميل التسجيل 2022-04-14 12:36
حجم 70.63 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

FOREGROUND_SERVICE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Minor bug fixes
معلومات عامة
نص 3.7.10 (86)
تحميل التسجيل 2020-12-05 17:15
حجم 44.58 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Minor bug fixes
معلومات عامة
نص 3.7.8 (82)
تحميل التسجيل 2020-03-08 02:51
حجم 32.89 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Minor bug fixes
معلومات عامة
نص 3.7.7 (81)
تحميل التسجيل 2019-05-23 10:20
حجم 54.14 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Minor bug fixes
معلومات عامة
نص 3.7.6 (80)
تحميل التسجيل 2018-11-19 06:32
حجم 53.12 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

الجديد في هذا الإصدار
Minor bug fixes
معلومات عامة
نص 3.7.5 (79)
تحميل التسجيل 2018-10-30 16:16
حجم 53.16 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

الجديد في هذا الإصدار
Minor bug fixes
معلومات عامة
نص 3.7.4 (78)
تحميل التسجيل 2018-09-22 18:59
حجم 55.88 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

الجديد في هذا الإصدار
Minor bug fixes
معلومات عامة
نص 3.7.2 (74)
تحميل التسجيل 2018-08-29 17:06
حجم 55.92 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Minor bug fixes
معلومات عامة
نص 3.7.1 (73)
تحميل التسجيل 2018-07-15 19:41
حجم 55.98 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Minor bug fixes
معلومات عامة
نص 3.6.2 (71)
تحميل التسجيل 2018-06-15 10:15
حجم 50.58 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 3.6 (68)
تحميل التسجيل 2018-06-03 11:09
حجم 54.6 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 3.5.67 (67)
تحميل التسجيل 2018-04-19 15:41
حجم 49.95 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 3.5.66 (66)
تحميل التسجيل 2018-04-13 06:29
حجم 49.75 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 3.5.65 (65)
تحميل التسجيل 2018-03-06 16:20
حجم 49.08 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

الجديد في هذا الإصدار
Minor bug fixes
معلومات عامة
نص 3.3.56 (56)
تحميل التسجيل 2017-10-08 17:19
حجم 49.04 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Earn new avatars by complete achievements !
معلومات عامة
نص 3.3.49 (49)
تحميل التسجيل 2017-09-12 17:52
حجم 48.72 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Bugs fix
معلومات عامة
نص 3.2.48 (48)
تحميل التسجيل 2017-09-01 20:48
حجم 48.27 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 3.2.46 (46)
تحميل التسجيل 2017-08-02 18:03
حجم 45.81 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Japanese translations
Daily reward of avatars
Remove coins system
معلومات عامة
نص 3.0.44 (44)
تحميل التسجيل 2017-07-19 20:18
حجم 45.61 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
New end game screen
Extra life now available on game over
معلومات عامة
نص 2.10.43 (43)
تحميل التسجيل 2017-07-06 21:47
حجم 41.5 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Optimizations
معلومات عامة
نص 2.8.39 (39)
تحميل التسجيل 2017-05-22 17:25
حجم 39.02 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.7.38 (38)
تحميل التسجيل 2017-04-13 08:32
حجم 38.7 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.6.36 (36)
تحميل التسجيل 2017-03-22 09:05
حجم 37.36 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.6.34 (34)
تحميل التسجيل 2017-03-01 08:32
حجم 34.77 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.4.31 (31)
تحميل التسجيل 2017-02-19 08:44
حجم 34.69 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.4.29 (29)
تحميل التسجيل 2017-02-16 10:30
حجم 34.69 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Valentine's day pack
New avatars
Diamonds
Bugs fix and optimisations
معلومات عامة
نص 2.4.27 (27)
تحميل التسجيل 2017-02-10 10:31
حجم 34.66 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.3.25 (25)
تحميل التسجيل 2017-01-19 10:41
حجم 32.56 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.2.22 (22)
تحميل التسجيل 2017-01-13 10:03
حجم 32.58 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Performances optimisations
معلومات عامة
نص 2.0.20 (20)
تحميل التسجيل 2016-12-31 08:07
حجم 45.87 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.0.17 (17)
تحميل التسجيل 2016-12-28 08:36
حجم 45.65 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

ACCESS_COARSE_UPDATES

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.2.2 (8)
تحميل التسجيل 2016-12-16 09:59
حجم 29.96 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

جميع التطبيقات VOODOO في dev.mob-core.com

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك, واسمحوا لنا أن نعرف

2016/12/21 07:52
ألعاب ذات صلة:
© 2011-2024 mob-core.com