لعبة Ailment هي لعبة إطلاق النار ، صنعت بأسلوب "retro" ، لأنك تنتظر عالماً مسطحًا للغاية مع ظهور وحدات البكسل الظاهرة ، ومع ذلك ، فقد أثبت هذا التنسيق نفسه منذ فترة طويلة ، ومن الأمثلة الجيدة على ذلك هو Hotline Miami الناضجة ، التي يشبهها المنتج الجديد بالتأكيد.
لقد قمنا بإعداد اللعبة في استوديو BeardyBirdGames ، والتي تعتبر هذه اللعبة الأولى من نوعها ، ولكن بالفعل في الأسابيع الأولى بعد الإطلاق وبإعلانات ضعيفة إلى حد ما ، جمعت بنجاح أكثر من 10000 عملية تنزيل ، والتي اعتبرناها نتيجة جيدة.
ستأخذك مؤامرة اللعبة إلى مسافة بعيدة ، حيث يحدث شيء غير مفهوم على متن مركبة فضائية شاسعة ولكنها وحيدة ، سيتعين على شخصيتك اكتشافها. بعد أحداث غير معروفة ، فقد ذاكرته ، وفقًا لكلاسيكيات هذا النوع (نذكر Dead Space) ، حول الكسالى وغيرهم من المخلوقات العدوانية المستعدين لتناول الطعام أو إطلاق النار عليك من الناسفون. بالطبع ، لن تظل هذه الجرأة دون إجابة ، لذلك عليك إطلاق النار عليهم واستكشاف المنطقة ، وإيجاد نصائح جديدة لفهم ما يحدث ، ومشاهدة حوارات الشخصية الرئيسية (يتحدث إلى نفسه ، يفكر بصوت عالٍ) ، و تعتاد على ديناميات لا تصدق. هل أنت مستعد لمغامرة فاضحة في الفضاء؟
ميزات اللعبة:
مجموعة كبيرة من الأسلحة ، وهناك لأي حالة
القسوة بكل مظاهرها
مؤامرة مثيرة للاهتمام ، والتي لا تنسى في هذه العملية
الرسومات على غرار الرجعية
العديد من المونولوجات من الشخصية الرئيسية
صوت عظيم ، والذي بدا لنا مناسبة للغاية
البيئة القاتمة لا تسمح لك بالرحيل حتى النهاية
اللعبة مليئة بيض عيد الفصح ، وهذا لا يحدث في كثير من الأحيان!
عيوب اللعبة:
هناك الإعلان
المشتريات متاحة أيضًا ، لكن يمكنك الاستغناء عنها.
خلاصة القول: إذا كنت على دراية بالآثار التي ذكرناها في المراجعة ، فستعجبك بالتأكيد لعبة Ailment ، لأنه على العموم هذا هو المشروع الذي تم إنشاؤه من قبل المشجعين للجماهير ، وهذا ملحوظ على الفور ؛)
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
FOREGROUND_SERVICE
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
FOREGROUND_SERVICE
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
QUERY_ALL_PACKAGES
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
QUERY_ALL_PACKAGES
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to control the vibrator.
Allows the app to change the state of network connectivity.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to control the vibrator.
Allows the app to change the state of network connectivity.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
PACKAGE_USAGE_STATS
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
PACKAGE_USAGE_STATS
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
PACKAGE_USAGE_STATS
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
PACKAGE_USAGE_STATS
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
PACKAGE_USAGE_STATS
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
PACKAGE_USAGE_STATS
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Update: *Added feature to fix the gun if you find the same one *Fixed small bugs *Added one more secret location
معلومات عامة
نص
2.5.9 (229)
تحميل التسجيل
2020-03-04 22:44
حجم
24.68 MB
العربية
لا
متطلبات
الروبوت
8.0+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Small update: * fixed Japanese localization * fixed Chinese localization * fixed Korean localization * Added difficulty bar at the beginning of the game * fixed some other small bugs * fixed bug with Game Over Screen
معلومات عامة
نص
2.5.8 (228)
تحميل التسجيل
2020-01-28 03:34
حجم
24.59 MB
العربية
لا
متطلبات
الروبوت
8.0+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Check out new update: *Fixed Japanese localization *Fixed Korean localization *Fixed some bugs
معلومات عامة
نص
2.5.6 (226)
تحميل التسجيل
2019-12-24 01:41
حجم
24.59 MB
العربية
لا
متطلبات
الروبوت
8.0+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Hey guys, new update: * Fixed bugs with Points in Multiplayer * Fixed bug with Multiplayer * Fixed some other bugs
معلومات عامة
نص
2.4.6 (217)
تحميل التسجيل
2019-10-30 16:09
حجم
28.75 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Update: *Added new characters for Multiplayer *Fixed bug with Points *Fixed other small bugs
معلومات عامة
نص
2.1.1 (208)
تحميل التسجيل
2019-10-15 02:08
حجم
30.72 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Update: *Added new characters for Multiplayer *Fixed bug with Points *Fixed other small bugs
معلومات عامة
نص
2.1.1 (206)
تحميل التسجيل
2019-10-11 08:18
حجم
30.08 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Heyo guys! For the Multiplayer be sure to update to this version to play without errors Update: * Fixed bugs in the script
معلومات عامة
نص
2.1.0 (205)
تحميل التسجيل
2019-10-03 19:22
حجم
21.52 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Heyo guys! For the Multiplayer be sure to update to this version to play without errors Update: * Fixed bugs in the script
معلومات عامة
نص
2.1.0 (202)
تحميل التسجيل
2019-09-18 22:27
حجم
21.51 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
*Thank you so much guys for such a great reviews! And also for telling me about bugs you notice! *Finally! UI Controls Customization! Now you can adjust positions of buttons and joystick! *Edited difficulty levels! *Fixed a few bugs
معلومات عامة
نص
1.4.6 (153)
تحميل التسجيل
2019-07-04 04:09
حجم
32.93 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
*Thank you so much guys for such a great reviews! And also for telling me about bugs you notice! *In the next Update - UI customisation In this one: *Performance optimization *Edited companion behaviour *Fixed enemies out of the map *Added one more secret location *Fixed bugs
معلومات عامة
نص
1.4.5 (146)
تحميل التسجيل
2019-06-24 22:37
حجم
32.86 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
*Thank you so much guys for such a great reviews! And also for telling me about bugs you notice!* Another good update: *Companions don't fall out of the map *Fixed undying companions *Fixed Rocket Launcher health *Enemies don't fall out of the map either *Companions are faster now *Fixed Save Sound Option *Fixed player monologue in the last scene
معلومات عامة
نص
1.4.5 (144)
تحميل التسجيل
2019-06-21 09:32
حجم
32.84 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Good update: *Please let me know if you find some bugs with new features added in this update* *Fixed some bugs *Companions are smarter *Doors are even less annoying *Reduced speed of enemy bullets *Added Power Shield lives indicator *Added Gun lives indicator * You can fix guns from now on
معلومات عامة
نص
1.4.5 (142)
تحميل التسجيل
2019-06-06 19:45
حجم
32.82 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.