Smiling-X Corp: Escape من Horror Studio هي لعبة حركة مكثفة يواجه فيها مطور ألعاب الفيديو النوايا الشريرة للإدارة ويحاول الهرب من المكتب.
كان المبرمج سعيدًا بشكل لا يصدق للعمل في شركة ألعاب كمبيوتر. الألغاز ، ومكافحة الزومبي ، وخلق وتغلب على العقبات كانت قريبة جدا للبطل ، في الواقع حصل على موقف الحلم. في وقت لاحق ، اقترح الرئيس إنشاء مشروع جديد وإعطاء المرؤوسين من رموز برنامج غير مفهومة قسم التطوير. وقع الناس في حالة منومة ، وعملوا على مدار الساعة ولم يدركوا مدى تدمير المنتج النهائي. قال الرئيس لوضع برنامج جديد على الخوادم ، ولكن الموظف أدرك أنه كان عليه أن يدمر البرنامج بشكل خفي وإيجاد طريقة للخروج من المكتب الغريب.
في البداية ، اللاعب مدعو لاختيار واحدة من أربع درجات من الصعوبة. أبسط طريقة للشبح تسمح لك باستكشاف المكتب والبقاء غير مرئي لرئيسك وسكرتيره الأمين. في الوضع الخفيف ، ستكون السكرتيرة في حالة نعسان ، ولا يستمع الرئيس لخطوات الآخرين ، لكن يمكنه رؤية شخص وتنويمه. في التنسيقات العادية والمتطرفة ، يكون المشرفون أكثر نشاطًا وانتباهًا. يتعين على اللاعب إكمال المهام ، والبحث عن الكائنات ، والتخطيط لمعالجات متعددة التمريرات (اقتحام الطابعة لجذب شخص ما من مكتبه إلى الممر والدخول إلى الباب الذي تم تركه مفتوحًا).
السمات المميزة للعبة Smiling-X Corp:
حالة المنومة من الزملاء.
البحث عن العناصر ، واستكمال المهام ؛
محاولات لإيجاد طريقة للخروج من المكتب ؛
مدرب الشر.
4 مستويات صعوبة.
عدة طوابق من مكتب حديث ، والقدرة على التحرك عن طريق المصعد ، وخزائن عديدة مع الداخلية مفصلة وعد دراسة مملة من الغرفة. لا يُسمح للرأس والمساعد بالاسترخاء ، وعلى الجدران توجد أنماط منومة تلهم الحلم على الشخصية. التصميم الجرافيكي الجيد والصوت اللطيف للصوت ينغمسان في أجواء مكتب غريب. ساعد المطور على حل المشكلات المختلفة باستمرار ، والعثور على الأشياء ، وفعل كل ما في وسعها لمنع الفكرة الرهيبة لرئيسه من أن تتحول إلى حقيقة وعدم مقابلته. فرص الهروب من أسر المكتب صغيرة جدًا!
إعلان
تحميل Smiling-X Corp: Escape من the Horror Studio 3.9.1
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
POST_NOTIFICATIONS
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
POST_NOTIFICATIONS
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
POST_NOTIFICATIONS
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to change the state of network connectivity.
Allows the app to prevent the device from going to sleep.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
POST_NOTIFICATIONS
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to change the state of network connectivity.
Allows the app to prevent the device from going to sleep.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Fixed code text for parent mission Updated library ads Fixed interface in devices with notch
معلومات عامة
نص
3.8.8 (99)
تحميل التسجيل
2023-04-05 23:42
حجم
141.78 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
POST_NOTIFICATIONS
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to change the state of network connectivity.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
POST_NOTIFICATIONS
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to change the state of network connectivity.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Fixed problem in the laboratory puzzle Fixed bug in the code showed in the panel in lab Fixed minor bugs Updated and improved performance
معلومات عامة
نص
3.8.6 (97)
تحميل التسجيل
2023-02-27 01:30
حجم
142.71 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
POST_NOTIFICATIONS
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to change the state of network connectivity.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
POST_NOTIFICATIONS
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to change the state of network connectivity.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
POST_NOTIFICATIONS
Allows the app to change the state of network connectivity.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
FOREGROUND_SERVICE
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
POST_NOTIFICATIONS
Allows the app to change the state of network connectivity.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
FOREGROUND_SERVICE
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
(fixed continue playing after ads) Special end of 2022 - 3rd Year !! Thank you to all our community. New special ending for christmas. All figure for free this Holiday! Use code "rescueme" in the computer to activate special hack!
معلومات عامة
نص
3.8.1 (84)
تحميل التسجيل
2023-01-01 04:37
حجم
141.57 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
This month 50% Off in all purchases! Secretary AI Improved. Fixed and improved all purchases
معلومات عامة
نص
3.6.1 (76)
تحميل التسجيل
2022-09-23 18:14
حجم
136.96 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Fixed age selector for ads library Fixed some purchases
معلومات عامة
نص
3.6 (71)
تحميل التسجيل
2022-09-03 04:27
حجم
128.1 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Fixed jumpscare Added footstep to the Boss Update Boss behavior, now more smart and random patrol path Fixed super weapon, now reload works better. Fixed minor bug
معلومات عامة
نص
3.3.2 (62)
تحميل التسجيل
2022-02-04 00:10
حجم
106.65 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Fixed jumpscare Added footstep to the Boss Update Boss behavior, now more smart and random patrol path Fixed super weapon, now reload works better. Fixed minor bug
معلومات عامة
نص
3.3.2 (62)
تحميل التسجيل
2022-02-04 00:11
حجم
107.53 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Update Boss behavior, now more smart and random patrol path Fixed super weapon, now reload works better. Fixed minor bug
معلومات عامة
نص
3.3.1 (61)
تحميل التسجيل
2022-01-30 03:28
حجم
106.65 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Update Boss behavior, now more smart and random patrol path Fixed super weapon, now reload works better. Fixed minor bug
معلومات عامة
نص
3.3.1 (61)
تحميل التسجيل
2022-01-30 03:28
حجم
107.53 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Erich collectible can hurt the boss again. Fixed quest to escape with fathers Fixed car ending escape and mission 1 ending
معلومات عامة
نص
3.3.0 (60)
تحميل التسجيل
2021-11-26 21:26
حجم
107.89 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Erich collectible can hurt the boss again. Fixed quest to escape with fathers Fixed car ending escape and mission 1 ending
معلومات عامة
نص
3.3.0 (60)
تحميل التسجيل
2021-11-26 21:26
حجم
108.78 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Fixed texture on low quality Fixed first mission Easter egg added: fgteev,dkdost2.0,acigamespot,theghost,keynesho,mrhumble,vasanthgaming,gamernetix
معلومات عامة
نص
2.5.3 (53)
تحميل التسجيل
2021-10-08 18:23
حجم
71.8 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Fixed texture on low quality Fixed first mission Easter egg added: fgteev,dkdost2.0,acigamespot,theghost,keynesho,mrhumble,vasanthgaming,gamernetix
معلومات عامة
نص
2.5.3 (53)
تحميل التسجيل
2021-10-08 18:23
حجم
72.69 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
v2.5 New game mode added First mission is available. New game improvements and bug fixed.
معلومات عامة
نص
2.5 (50)
تحميل التسجيل
2021-06-06 16:32
حجم
84.1 MB
العربية
لا
متطلبات
الروبوت
6.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read the contents of your USB storage.
Version 2.3.3 Fixing performance for low end devices Spiral only animated in high quality Fixed minor bug.
معلومات عامة
نص
2.3.3 (41)
تحميل التسجيل
2021-01-26 04:34
حجم
48.06 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Release 2.3.2 First Anniversary Update! Thank you all for playing. Added Christmas Tree edition. Fixed minor bugs. Waiting for your comments and suggestions in reviews ;)
معلومات عامة
نص
2.3.2 (40)
تحميل التسجيل
2020-12-26 19:33
حجم
47.79 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
V 2.3.0 fixed graphics glitch added new easter egg fixed door of the security room any suggestion in comments are welcome :)
معلومات عامة
نص
2.3.1 (39)
تحميل التسجيل
2020-11-29 19:10
حجم
46.83 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to read the contents of your USB storage.
version 2.2.9 Technical update with minor bug fixes
معلومات عامة
نص
2.2.9 (37)
تحميل التسجيل
2020-11-05 18:09
حجم
46.83 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Release 2.2.7 Fixed minor bugs and improved performance. If you have any suggestion or report in performance do not hesitate in tell us in comments.
معلومات عامة
نص
2.2.7 (35)
تحميل التسجيل
2020-10-11 05:02
حجم
46.79 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Release 2.2.5 New hidden bad ending (easter egg with new character) Fixed weapon nebulizator and other items for hit the boss. Fixed some falling bugs. Fixed password typing too long character. Improved light quality. Waiting for your review and suggestion in comments.
معلومات عامة
نص
2.2.6 (34)
تحميل التسجيل
2020-09-30 05:25
حجم
46.48 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
New release 2.2 Collect Hunter figure for free! New improved quality and fx effects Fixed minor bug.
معلومات عامة
نص
2.2.0 (29)
تحميل التسجيل
2020-08-31 06:49
حجم
47.94 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Update 2.0 Smiling-X :) New collectible figure with hide skill! New car control mission added. New bad end and cutscene :) Fixed music in menu and other fx sound. Fixed cyborg attack while cutscene Fixed teleport card.
معلومات عامة
نص
2.0.0 (27)
تحميل التسجيل
2020-08-21 10:04
حجم
43.26 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Release 1.9: The world of dreams. Added skill to attack boss with some items New special world for discovery. New special ending in hard and extreme mode. New easter egg as been added. Fixed ending with fog. Fixed teleport from Corp-X Other minor bugs.
معلومات عامة
نص
1.9.0 (26)
تحميل التسجيل
2020-07-13 15:08
حجم
42.42 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
* New release 1.7 .1* Complete new secondary mission and discover an easter egg (a nice gift) New enemy activated. New camera show when Boss is near in vending machine. More beautiful effects has been added. Fixed some bugs. #wip Smiling-X II ;) we need your support.
معلومات عامة
نص
1.7 (24)
تحميل التسجيل
2020-05-04 15:24
حجم
40.91 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Release 1.6 #stayhome ;) Improved ia Removed some ads in normal level Removed ads for puzzle info Added dust and light effects Added 2 new Easter egg Fixed minor bug.
معلومات عامة
نص
1.6 (22)
تحميل التسجيل
2020-04-14 10:12
حجم
38.73 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Version 1.5.3 with so many improvements. Improved cinematic when using teleport. Fixed minor bug. Chasing Music was improved. Added font for different language support. Fixed czech language font
معلومات عامة
نص
1.5.3 (21)
تحميل التسجيل
2020-03-08 02:34
حجم
38.4 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Fixed door Fixed boss minor bug Fixed floor in teleport Fixed air conduct Fixed some pickup items prevent jumping Added new animation in corpx
معلومات عامة
نص
1.5.2 (18)
تحميل التسجيل
2020-03-05 00:46
حجم
35.91 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
version 1.4.2 Fixed minor bug with handle of weapon. Added a new clue system to help you in each mission. Added support for arabic, Czech & Indonesian
معلومات عامة
نص
1.4.2 (14)
تحميل التسجيل
2020-02-03 03:36
حجم
49.79 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
v.1.3.1(improved) Introduced new easter-eggs hidden. New awesome weapon. The boss will see you if you do not close the curtains. The secretary will attack you in normal and extreme mode. More fixes! Every time you give us 5 stars our developer is smiling… ;)
معلومات عامة
نص
1.3.1 (11)
تحميل التسجيل
2020-01-20 18:36
حجم
44.25 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.