لعبة رقيق! Cute Lunchbox هي لعبة ألغاز مسلية مبنية على مشروع 2048. هنا عليك أن تجمع بين أطباق متطابقة وملء صندوق مربع بـ 16 خلية.
تبدأ القصة بزوجين من كرات الأرز التي يجب دمجها في العنصر التالي. بالتحرك لأعلى ولأسفل ولليسار ولليمين ، يمكنك تحريك كل الصفوف في الاتجاه المطلوب. عند التبديل ، يتم دمج أطباق متطابقة في الخلايا المجاورة. وتظهر كرة أرز جديدة في إحدى الخلايا الفارغة. ثم عليك تغيير التكتيكات والتفكير في التلاعب ، مع الأخذ في الاعتبار موقع منتج آخر. من المهم أن تشكل المناورات روابط. تؤدي بعض الخطوات غير المجدية إلى ملء الصندوق بسرعة.
ابتكر المطور سيناريو يربح فيه الجميع: إذا نفدت الخلايا الفارغة ، يمكنك البدء في تزيين صندوق الغداء الخاص بك. ثم يوصى بجمع الجوائز ، وتحليل عدد النقاط المكتسبة والمتابعة إلى المهمة التالية. قبل إنشاء صندوق الغداء التالي ، هناك بعض الإعدادات التي يمكنك تعديلها. يُطلب من المستخدم الإشارة إلى المواد التي سيتم تصنيع الصندوق منها ، وما الذي يحتاج إلى التزيين به. إذا سمحت النقاط المتراكمة ، حدد الخوارزمية المرغوبة وترتيب تحويل الأطباق.
السمات المميزة للعبة Fluffy! لطيف لانش بوكس:
توصيل المنتجات على طول الخطوط الرأسية والأفقية ؛
زيادة المؤشرات عند الجمع بين العناصر ؛
استلام الجوائز والهدايا ؛
إعداد الموسيقى والأطباق الجانبية.
اختيار الزينة لصندوق الطعام.
يكون الرقم الزوجي مرئيًا في الزاوية السفلية من كل خلية ؛ وفي لحظة الدمج ، يتم ضربه في اثنين. يساعد المؤشر أيضًا في معرفة مدى تقدمك في تحويل الطعام. من الضروري السعي وراء أعداد كبيرة ، حاول إكمال حركات أكثر من المرة السابقة. ولكن حتى مع معدلات منخفضة ، لا توجد أسباب للحزن ، لأن الطاهي يفوز بجوائز ويحصل على تحسينات في أي موقف. الرسومات الملونة والنتيجة الإيجابية تجذب اللاعبين الصغار والكبار. الهدف الواضح والصعب في نفس الوقت ، يجعلك تطور التفكير المنطقي. سجل سجلات وأنشئ اتجاهات الطهي الأصلية!
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
ACCESS_ADSERVICES_ATTRIBUTION
ACCESS_ADSERVICES_AD_ID
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
The 13th Bento Festival begins! Event period: 2023-11-1/2023-11-15 Collect Bento Stickers and exchange various prizes! New stuffed toy can be placed on the game screen, or exchange arranged garnishes! There is also a letter from garnishes!?
معلومات عامة
نص
1.0.109 (119)
تحميل التسجيل
2023-11-07 08:58
حجم
210.17 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
The 10th Bento Festival begins! Event period: 2023-7-21/2023-8-4 Collect Bento Stickers and exchange various prizes! New stuffed toy can be placed on the game screen, or exchange arranged garnishes! There is also a letter from garnishes!?
معلومات عامة
نص
1.0.99 (109)
تحميل التسجيل
2023-07-19 13:36
حجم
199.39 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
All new Bento Masters is here! A selection screen will be displayed at the start of the game. Collect Shiny Drops and draw gacha!
معلومات عامة
نص
1.0.87 (97)
تحميل التسجيل
2023-04-08 15:53
حجم
170 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
POST_NOTIFICATIONS
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
POST_NOTIFICATIONS
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
POST_NOTIFICATIONS
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
POST_NOTIFICATIONS
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
POST_NOTIFICATIONS
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
POST_NOTIFICATIONS
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Adds Autumn time limited login bonus rewards. Log in the game during the period (2022-11-1 / 2022-11-30) to receive rewards. Now can purchase "Enjoy the Moon" set with points.
معلومات عامة
نص
1.0.72 (81)
تحميل التسجيل
2022-11-06 17:38
حجم
144.44 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
FOREGROUND_SERVICE
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
FOREGROUND_SERVICE
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Fixed a problem that may crash when removing garnish.
معلومات عامة
نص
1.0.34 (41)
تحميل التسجيل
2021-03-01 05:32
حجم
97.81 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
FOREGROUND_SERVICE
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
FOREGROUND_SERVICE
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Added Valentine's gifts. If log in during the period (2021-02-10 / 2021-02-20), will receive a gift. Please check the announcement on the TOP page.
Bug fixes.
معلومات عامة
نص
1.0.33 (40)
تحميل التسجيل
2021-02-07 03:14
حجم
97.81 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
FOREGROUND_SERVICE
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
FOREGROUND_SERVICE
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Fixed a bug which caused the garnish description to be incorrect.
معلومات عامة
نص
1.0.31 (38)
تحميل التسجيل
2020-12-30 10:35
حجم
98.46 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
More layout challenges from garnish! Improves Cloud Save feature.
معلومات عامة
نص
1.0.26 (32)
تحميل التسجيل
2020-11-06 08:33
حجم
97.96 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Added new "Garnish Challenges". Complete the challenge and get alternated garnish. Start challenging by unlock 3 garnish profiles.
معلومات عامة
نص
1.0.22 (28)
تحميل التسجيل
2020-09-20 23:05
حجم
92.25 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
REQUEST_INSTALL_PACKAGES
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
New garnish is added. A save button is added for you to save the game
معلومات عامة
نص
1.0.21 (27)
تحميل التسجيل
2020-09-04 13:11
حجم
88.4 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
New garnish is added. A save button is added for you to save the game
معلومات عامة
نص
1.0.20 (26)
تحميل التسجيل
2020-09-04 13:10
حجم
88 MB
العربية
لا
متطلبات
الروبوت
5.1+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.