لعبة No Humanity هي لعبة أركيد للأندرويد الخاص بك ، ولكن يمكن أن يطلق عليها بأمان واحدة من أصعب المشاريع ، حتى على الرغم من الديناميكيات المتواضعة لما يحدث. لذا ، إذا كانت أعصابك قوية ، أو لن يكون كسر الهاتف مسيئًا ، نوصيك بالتعرف على نفسك ، يتم تذكر هذا المشروع بسرعة وهو جاهز لإبقائك مستيقظًا لفترة طويلة.
لقد أعددنا لعبة في Sweaty Chair Studio ، والتي لا تحظى بشعبية كبيرة بين الألعاب المحمولة ، خاصة وأن هذه اللعبة هي تاج الإبداع. بالمناسبة ، تم تنزيله في الوقت الحالي من قبل أكثر من مليون لاعب شجاع ، بينما يحتفظ بتصنيف جيد. والأهم من ذلك أنه في الحقيقة لا نهاية له لأنه من المستحيل اجتيازه!
طريقة اللعب هنا واضحة ، دون نية كبيرة. تحصل على مركبة فضائية ، يمكن أن تكون بأشكال مختلفة ، وتذهب إلى الفضاء ، حيث المهمة الوحيدة هي البقاء على قيد الحياة لأطول فترة ممكنة. الفضاء نفسه أبيض وخطير للغاية.
تتمثل مهمة اللاعب في تجنب الاصطدام بسفن الخصوم ، والصواريخ المطلقة ، والليزر ، وكذلك الأيدي الضخمة ، والأخطبوطات وكمية هائلة من المحتويات الأخرى ، مما يثبت مرة أخرى أن خيال بعض المطورين ساحق. أي تصادم هو موت وفرصة للبدء من جديد.
بالنسبة للوقت الذي تمكنت فيه من الصمود وعدم الموت ، ستتلقى مكافآت يمكن إنفاقها على شراء مركبة فضاء جديدة أو لعب المرح المحلي ، وهو ما يسمى قانونًا "احتيال". لماذا - ستفهم بنفسك ، وبسرعة. بالمناسبة ، عند اختيار السفينة التالية ، ضع في اعتبارك شكلها وحجمها ، فكلما زاد حجمها ، قلت فرصتك في البقاء على قيد الحياة.
مميزات لعبة No Humanity للاندرويد:
طريقة لعب صعبة للغاية ، يمكن اعتبار أي نتيجة بمثابة رقم قياسي ؛
ولكن هناك سجلات حقيقية هنا أيضًا - دافع إضافي ؛
أكثر من 160 جائزة في لعبة "احتيال" اللعبة المحلية ؛
مجموعة واسعة من سفن الفضاء من مختلف الأشكال والأحجام ؛
عدد كبير من الفخاخ والمعارضين والعقبات ؛
يمكنك اللعب بدون الوصول إلى الإنترنت ؛
هناك طريقة لمواجهة الأصدقاء.
عيوب اللعبة:
إنه أمر صعب حقًا ، إذا كنت شخصًا سريع الغضب ، فلا نوصي به ؛
لا يوجد الكثير من الإعلانات ، هناك مشتريات لأكثر صبرًا.
خلاصة القول: No Humanity هي جنة للمشجعين المتشددين والمشاريع التي تجعلك متوترًا. واللعب البسيط غير المعقد بتصميم لطيف يساعد فقط على إخفاء الجوهر الشيطاني لما يحدث ...
In order to update our multiplayer networking, it had to be remade from the ground up. New bugs and issues may have risen due to this process so all bug reports will help!
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
FOREGROUND_SERVICE
Allows the app to prevent the device from going to sleep.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
FOREGROUND_SERVICE
Allows the app to prevent the device from going to sleep.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
In order to update our multiplayer networking, it had to be remade from the ground up. New bugs and issues may have risen due to this process so all bug reports will help!
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to change the state of network connectivity.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to control the vibrator.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to change the state of network connectivity.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
In order to update our multiplayer networking, it had to be remade from the ground up. New bugs and issues may have risen due to this process so all bug reports will help!
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to change the state of network connectivity.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to control the vibrator.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to change the state of network connectivity.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
In order to update our multiplayer networking, it had to be remade from the ground up. New bugs and issues may have risen due to this process so all bug reports will help!
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to change the state of network connectivity.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to control the vibrator.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to change the state of network connectivity.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
In order to update our multiplayer networking, it had to be remade from the ground up. New bugs and issues may have risen due to this process so all bug reports will help!
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to control the vibrator.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to control the vibrator.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to control the vibrator.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to control the vibrator.
Allows the app to read the contents of your USB storage.
New: - Haptic feedback. - New offers. - New animations.
Changes: - balancing. - Sped up some panels.
Fixes: - Stability and improvements. - PVP fixes.
معلومات عامة
نص
8.4.2 (22080117)
تحميل التسجيل
2022-08-01 23:45
حجم
55.55 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to control the vibrator.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Game maintenance with some features. - New leaderboard rankings. With more to win! - Pricing and Offers Adjustment - Infinite Universe Creator Rewards. Get In-game Items for creating maps! - Infinite Universe Difficulty Rating system. - Infinite Universe Completion Reward Overhaul View more details within the Changelogs.
معلومات عامة
نص
8.3.5 (22071517)
تحميل التسجيل
2022-07-20 01:35
حجم
53.47 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
New: - Haptic feedback. - New offers. - New animations.
Changes: - balancing. - Sped up some panels.
Fixes: - Stability and improvements. - PVP fixes.
معلومات عامة
نص
8.3.5 (22071517)
تحميل التسجيل
2022-08-01 23:45
حجم
55.54 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Game maintenance with some features. - New leaderboard rankings. With more to win! - Pricing and Offers Adjustment - Infinite Universe Creator Rewards. Get In-game Items for creating maps! - Infinite Universe Difficulty Rating system. - Infinite Universe Completion Reward Overhaul View more details within the Changelogs.
معلومات عامة
نص
8.3.4 (22071318)
تحميل التسجيل
2022-07-20 01:35
حجم
53.43 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Game maintenance with some features. - New leaderboard rankings. With more to win! - Pricing and Offers Adjustment - Infinite Universe Creator Rewards. Get In-game Items for creating maps! - Infinite Universe Difficulty Rating system. - Infinite Universe Completion Reward Overhaul View more details within the Changelogs.
معلومات عامة
نص
8.3.4 (22071318)
تحميل التسجيل
2022-07-20 01:35
حجم
55.5 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Game maintenance with some features. - New Crown system for missions. - New tickle button for Claw Machine + adjustments. - New Bug Report feature. - Reward Balances. - PVP fixes. - Custom Map fixes. - Tiny Intern fixes. - Some Badge fixes. - Various crash fixes. View more details within the Changelogs.
معلومات عامة
نص
8.2.0 (2205030)
تحميل التسجيل
2022-05-20 20:41
حجم
57.06 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Game maintenance with some features. - New Crown system for missions. - New tickle button for Claw Machine + adjustments. - New Bug Report feature. - Reward Balances. - PVP fixes. - Custom Map fixes. - Tiny Intern fixes. - Some Badge fixes. - Various crash fixes. View more details within the Changelogs.
معلومات عامة
نص
8.2.0 (2205030)
تحميل التسجيل
2022-05-20 20:41
حجم
59.2 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
- Progression Tweaks - New shop packs - Custom map improvements. - We're always improving No Humanity, checkout the in-game changlogs for more info!
معلومات عامة
نص
8.1.1 (2201110)
تحميل التسجيل
2022-02-03 18:06
حجم
53.21 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
- Progression Tweaks - New shop packs - Custom map improvements. - We're always improving No Humanity, checkout the in-game changlogs for more info!
معلومات عامة
نص
8.1.1 (2201110)
تحميل التسجيل
2022-02-03 18:06
حجم
55.24 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
- Progression Tweaks - New shop packs - Custom map improvements. - We're always improving No Humanity, checkout the in-game changlogs for more info!
معلومات عامة
نص
8.1.1 (2112020)
تحميل التسجيل
2021-12-06 18:45
حجم
54.68 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
- Progression Tweaks - New shop packs - Custom map improvements. - We're always improving No Humanity, checkout the in-game changlogs for more info!
معلومات عامة
نص
8.1.0 (2111020)
تحميل التسجيل
2021-11-18 14:35
حجم
52.66 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
- Progression Tweaks - New shop packs - Custom map improvements. - We're always improving No Humanity, checkout the in-game changlogs for more info!
معلومات عامة
نص
8.1.0 (2111020)
تحميل التسجيل
2021-11-18 14:35
حجم
54.68 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
- Reverted some core systems to 8.0.4 version. - New custom map anchor feature. - PVP combo ship powerups. - Ship Tier progression adjustments. - Scrapyyard reward adjust. - Pods drop 100% if unlocked. - 30 day login reward balance. - Custom map editor fixes.
معلومات عامة
نص
8.0.7 (2110080)
تحميل التسجيل
2021-11-02 21:48
حجم
51.79 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
- Progression Tweaks - New shop packs - Custom map improvements. - We're always improving No Humanity, checkout the in-game changlogs for more info!
معلومات عامة
نص
8.0.7 (2110080)
تحميل التسجيل
2021-11-02 21:48
حجم
53.78 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
- Reverted some core systems to 8.0.4 version. - New custom map anchor feature. - PVP combo ship powerups. - Ship Tier progression adjustments. - Scrapyyard reward adjust. - Pods drop 100% if unlocked. - 30 day login reward balance. - Custom map editor fixes.
معلومات عامة
نص
8.0.7 (2109270)
تحميل التسجيل
2021-10-05 22:03
حجم
51.77 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
- Reverted some core systems to 8.0.4 version. - New custom map anchor feature. - PVP combo ship powerups. - Ship Tier progression adjustments. - Scrapyyard reward adjust. - Pods drop 100% if unlocked. - 30 day login reward balance. - Custom map editor fixes.
معلومات عامة
نص
8.0.7 (2109270)
تحميل التسجيل
2021-10-05 22:03
حجم
53.77 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
- Reverted some core systems to 8.0.4 version. - New custom map anchor feature. - PVP combo ship powerups. - Ship Tier progression adjustments. - Scrapyyard reward adjust. - Pods drop 100% if unlocked. - 30 day login reward balance. - Custom map editor fixes.
معلومات عامة
نص
8.0.7 (2109060)
تحميل التسجيل
2021-09-16 14:49
حجم
51.07 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
New Features! - Reworked early game progression with ship tiers - Added world difficulties - Worlds will now introduce bosses as you complete missions - Added multiplayer battle-pass
Changes and Polishes - Improved Custom map browsing experience - Change Killing Deadpool to be called The Scrapyard - Adjusted UI for new progression and difficulty changes
Bug fixes and Improvements - Fix for potential leaderboard crashes
معلومات عامة
نص
8.0.5 (2108070)
تحميل التسجيل
2021-08-10 15:39
حجم
50.86 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
New Features! - Reworked early game progression with ship tiers - Added world difficulties - Worlds will now introduce bosses as you complete missions - Added multiplayer battle-pass
Changes and Polishes - Improved Custom map browsing experience - Change Killing Deadpool to be called The Scrapyard - Adjusted UI for new progression and difficulty changes
Bug fixes and Improvements - Fix for potential leaderboard crashes
معلومات عامة
نص
8.0.5 (2108070)
تحميل التسجيل
2021-08-10 15:39
حجم
52.81 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
New Features! - Reworked early game progression with ship tiers - Added world difficulties - Worlds will now introduce bosses as you complete missions - Added multiplayer battle-pass
Changes and Polishes - Improved Custom map browsing experience - Change Killing Deadpool to be called The Scrapyard - Adjusted UI for new progression and difficulty changes
Bug fixes and Improvements - Fix for potential leaderboard crashes
معلومات عامة
نص
8.0.5 (2107300)
تحميل التسجيل
2021-08-01 13:55
حجم
54.21 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Changes & Polishes - In game UI now displays your highscore - Adjusted logic to when the highscore highlight appears - Highlight Viewing panel no longer prompts after sharing - Weapons now required to be unlocked in order - BALANCE: Reduced idle adventure rewards
Bug Fixes and improvements - Fix highlights not displaying flavor text correctly - Fix drops from not despawning post match - Fix some UI being pressable when they shouldn't - Fix rerolling cosmetics using gems instead of stardust
معلومات عامة
نص
8.0.4 (2107180)
تحميل التسجيل
2021-07-18 07:51
حجم
49.41 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Changes & Polishes - In game UI now displays your highscore - Adjusted logic to when the highscore highlight appears - Highlight Viewing panel no longer prompts after sharing - Weapons now required to be unlocked in order - BALANCE: Reduced idle adventure rewards
Bug Fixes and improvements - Fix highlights not displaying flavor text correctly - Fix drops from not despawning post match - Fix some UI being pressable when they shouldn't - Fix rerolling cosmetics using gems instead of stardust
معلومات عامة
نص
8.0.4 (2107180)
تحميل التسجيل
2021-07-18 07:51
حجم
51.32 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
New Features: - Added new cosmetics - Added emotes sets - Added Highlight system - Players can upload custom maps in app - Custom map Editor new features
Bug Fixes: - Fixed game start up and crash issues - Fixed unobtainable tiny interns - Fixed multiple claw machine issues - Fixed UI overlapping issues
Changes + Polishes: - Adjusted an idle adventure log - Friend referral rewards gems - New UI look and feedback - Increased custom map upload limit to 10 - We need Marshmallow Fight Part 4!
معلومات عامة
نص
8.0.2 (210607)
تحميل التسجيل
2021-06-13 04:30
حجم
52.44 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
New Features: - Added new cosmetics - Added emotes sets - Added Highlight system - Players can upload custom maps in app - Custom map Editor new features
Bug Fixes: - Fixed game start up and crash issues - Fixed unobtainable tiny interns - Fixed multiple claw machine issues - Fixed UI overlapping issues
Changes + Polishes: - Adjusted an idle adventure log - Friend referral rewards gems - New UI look and feedback - Increased custom map upload limit to 10 - We need Marshmallow Fight Part 4!
معلومات عامة
نص
8.0.1 (210601)
تحميل التسجيل
2021-06-13 04:29
حجم
50.05 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
New Features: - Added new cosmetics - Added emotes sets - Added Highlight system - Players can upload custom maps in app - Custom map Editor new features
Bug Fixes: - Fixed game start up and crash issues - Fixed unobtainable tiny interns - Fixed multiple claw machine issues - Fixed UI overlapping issues
Changes + Polishes: - Adjusted an idle adventure log - Friend referral rewards gems - New UI look and feedback - Increased custom map upload limit to 10 - We need Marshmallow Fight Part 4!
معلومات عامة
نص
8.0.1 (210601)
تحميل التسجيل
2021-06-13 04:30
حجم
51.89 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
New Features - Revamped Leaderboard system, fight for your place on the leaderboard and get awesome rewards each week! - Custom maps for the community to play and create, with an in game map editor and browser.
Changes & Polish - Laser Challenge world now has fat lasers. - Claw Machine now shows your current streak and total amount of prizes collected. - Major Skill rebalancing to be more fair and fun!
Bug Fixes and improvements - Badges should now unlock at correct times - Various other fixes
معلومات عامة
نص
8.0.1 (210504)
تحميل التسجيل
2021-05-08 03:29
حجم
50.31 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
New Features - Revamped Leaderboard system, fight for your place on the leaderboard and get awesome rewards each week! - Custom maps for the community to play and create, with an in game map editor and browser.
Changes & Polish - Laser Challenge world now has fat lasers. - Claw Machine now shows your current streak and total amount of prizes collected. - Major Skill rebalancing to be more fair and fun!
Bug Fixes and improvements - Badges should now unlock at correct times - Various other fixes
معلومات عامة
نص
8.0.1 (210504)
تحميل التسجيل
2021-05-08 03:29
حجم
32.59 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
New Features - Revamped Leaderboard system, fight for your place on the leaderboard and get awesome rewards each week! - Custom maps for the community to play and create, with an in game map editor and browser.
Changes & Polish - Laser Challenge world now has fat lasers. - Claw Machine now shows your current streak and total amount of prizes collected. - Major Skill rebalancing to be more fair and fun!
Bug Fixes and improvements - Badges should now unlock at correct times - Various other fixes
معلومات عامة
نص
8.0.0 (210431)
تحميل التسجيل
2021-05-02 20:19
حجم
54.74 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
New Features - Revamped Leaderboard system, fight for your place on the leaderboard and get awesome rewards each week! - Custom maps for the community to play and create, with an in game map editor and browser.
Changes & Polish - Laser Challenge world now has fat lasers. - Claw Machine now shows your current streak and total amount of prizes collected. - Major Skill rebalancing to be more fair and fun!
Bug Fixes and improvements - Badges should now unlock at correct times - Various other fixes
معلومات عامة
نص
8.0.0 (210431)
تحميل التسجيل
2021-05-02 20:19
حجم
36.75 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
New Features - 40 Badges to collect. Some art designs were from the community! - Skippable Tutorials - Re-rollable missions
Changes & Polish - Tutorials are now further apart from each other. - Prevented missions from being the same back to back. - Typo fixes and localization.
Bug Fixes and improvements - Fixed dead ships being invisible. - Fixed shop prices showing incorrectly. - Fixed an issue where the Deluxe Calendar could not be purchased.
Notes - Temporarily disabled friends system
معلومات عامة
نص
7.1.2 (210401)
تحميل التسجيل
2021-04-08 11:18
حجم
48.12 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to control the vibrator.
Allows the app to change the state of network connectivity.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to control the vibrator.
Allows the app to change the state of network connectivity.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
New Features - 40 Badges to collect. Some art designs were from the community! - Skippable Tutorials - Re-rollable missions
Changes & Polish - Tutorials are now further apart from each other. - Prevented missions from being the same back to back. - Typo fixes and localization.
Bug Fixes and improvements - Fixed dead ships being invisible. - Fixed shop prices showing incorrectly. - Fixed an issue where the Deluxe Calendar could not be purchased.
Notes - Temporarily disabled friends system
معلومات عامة
نص
7.1.2 (210401)
تحميل التسجيل
2021-04-08 11:18
حجم
30.88 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to control the vibrator.
Allows the app to change the state of network connectivity.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to control the vibrator.
Allows the app to change the state of network connectivity.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
We redesigned the whole game UI and tutorials, giving a more user-friendly experience. Also introduced gems for premium items and added rewards for achievements, have fun collecting!
معلومات عامة
نص
7.0.4 (201207)
تحميل التسجيل
2020-12-09 22:01
حجم
25.21 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
We redesigned the whole game UI and tutorials, giving a more user-friendly experience. Also introduced gems for premium items and added rewards for achievements, have fun collecting!
معلومات عامة
نص
7.0.3 (201126)
تحميل التسجيل
2020-12-04 21:21
حجم
25.11 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Added world missions for a better learning curve. Polished UI and user experience.
معلومات عامة
نص
6.2.0 (201019)
تحميل التسجيل
2020-10-25 02:18
حجم
23.28 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
We redesigned the whole game UI and tutorials, giving a more user-friendly experience. Also introduced gems for premium items and added rewards for achievements, have fun collecting!
معلومات عامة
نص
6.2.0 (201019)
تحميل التسجيل
2020-12-04 21:21
حجم
23.28 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
- Updated ads library to compliant Google's policy. - Minor bug fixes. - Regular maintenance. - Updated plugins for better stability and performance.
معلومات عامة
نص
6.1.8 (200926)
تحميل التسجيل
2020-09-29 15:23
حجم
22.69 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
- Introduced world progress for new players. - Regular maintenance. - Updated ads library to compliant Google's policy.
معلومات عامة
نص
6.1.7 (200825)
تحميل التسجيل
2020-08-31 10:05
حجم
22 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
- Introduced world progress for new players. - Regular maintenance. - Updated ads library to compliant Google's policy.
معلومات عامة
نص
6.1.6 (200706)
تحميل التسجيل
2020-07-25 17:05
حجم
20.16 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
- Regular maintenance. - Fixed the bug causing some spaceship invulnerable from bullets.
معلومات عامة
نص
6.1.4 (200419)
تحميل التسجيل
2020-05-04 03:08
حجم
15.69 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
- Regular maintenance. - Fixed leaderboards not loading Play Games scores. - Added social media links. - Reduced installer size.
معلومات عامة
نص
6.1.3 (200412)
تحميل التسجيل
2020-04-20 15:26
حجم
15.71 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
- Regular maintenance. - Fixed leaderboards not loading Play Games scores. - Added social media links. - Reduced installer size.
معلومات عامة
نص
6.1.2 (200320)
تحميل التسجيل
2020-03-23 00:59
حجم
15.69 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
- Regular maintenance. - Fixed leaderboards not loading Play Games scores. - Added social media links.
معلومات عامة
نص
6.1.1 (200302)
تحميل التسجيل
2020-03-04 08:16
حجم
18.32 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Survivors have explored into a new universe - Chinese New Year! Try your best to survive from the Rat King, good luck!
- New Chinese New Year world and free for a limit of time only. - Added a more obvious warning sign for bosses. - Fixed the All Stars world cannot be purchased from the last version. - Re-balanced ships in multiplayer mode.
معلومات عامة
نص
6.1.0 (200122)
تحميل التسجيل
2020-01-27 15:51
حجم
18.46 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
- Fixed bug that players can die when in revive countdown. - Added more coins for rewarded ads, plus a chance for winning a spaceship. - Added warnings for bosses in Original world. - Fixed the performance issue in Bullet Hell world. - Fixed minor UI bugs.
معلومات عامة
نص
6.0.5 (191223)
تحميل التسجيل
2019-12-24 20:05
حجم
17.9 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
-
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
- Fixed some crashes happened in some devices. - Added video ads for unlocking superheroes skins, plus optimized their backgrounds. - Added video ads for playing the claw machine. - Added spaceship ticket sell and combine after you collected all spaceships in a group.
Again, if you don't like video ads, you can always turn them off in settings. We wish you enjoy our game without any bad experience.
معلومات عامة
نص
6.0.2 (190715)
تحميل التسجيل
2019-07-20 23:57
حجم
29.74 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
- Upgrade the game engine to latest for better performance and compatibility to modern phones. - Refine replay sharing UI. - Removed LAN connection since it's been redundant. - Minor bug fixes.
P.S. Multiplayer mode is not compatible with previous version, please let your friend upgrade to 6.0.0 for playing together.
معلومات عامة
نص
6.0.0 (190613)
تحميل التسجيل
2019-06-17 03:28
حجم
25.95 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
- Added GIF sharing. - Added referral program, earn 1000 coins for each friend you referred! - Fix minor bugs.
معلومات عامة
نص
5.7.6 (190410)
تحميل التسجيل
2019-06-04 03:53
حجم
27.72 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
NEW mission system to help you gather coins quicker. Come back every 12 hours for new missions!
معلومات عامة
نص
5.7.3 (180920)
تحميل التسجيل
2018-10-12 14:53
حجم
25.9 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
- Regular maintenance and minor bug fixes. - Fixed a bug causing redeem tutorial not correctly showing.
معلومات عامة
نص
5.6.4 (180425)
تحميل التسجيل
2018-05-05 04:48
حجم
26.73 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
- Removed unnecessary permission requests. - Regular maintenance and minor bug fixes.
معلومات عامة
نص
5.6.3 (180410)
تحميل التسجيل
2018-04-14 01:17
حجم
26.73 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
- Removed unnecessary permission requests. - Regular maintenance and minor bug fixes.
معلومات عامة
نص
5.6.2 (180326)
تحميل التسجيل
2018-04-07 09:21
حجم
26.68 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
- Fixed a bug progress cannot be load in offline, induced in 5.6.0.
معلومات عامة
نص
5.6.1 (180304)
تحميل التسجيل
2018-03-23 18:48
حجم
26.67 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
- Added total survival duration and deaths stats for each expansion world
- Added setting to change player name manually
- Improved offline leaderboard for players not logging in Play Games
- Minor UI fixes and improvement
معلومات عامة
نص
5.5.3 (553)
تحميل التسجيل
2017-07-02 05:23
حجم
26.31 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.