0 (0)

وصف:

Just Survive  هي لعبة محمولة حيث يمكن للمستخدم أن يشعر وكأنه أحد الناجين في البرية. لكن كل شيء ليس بهذه البساطة كما قد يبدو للوهلة الأولى. في Just Survive ، سوف يطاردك الديناصور ريكس الضخم الذي سوف يسحقك إذا قمت بالتسكع. سيتعين على اللاعب البقاء على قيد الحياة في كارثة تسونامي ، وتجنب التنفس الناري وحتى التوازن ، في الشلال. لن يسمح لك Just Survive بالتأكيد بتشتيت انتباهك ولن يجعلك تشعر بالملل. هنا تحتاج إلى النظر باستمرار إلى الشاشة ومراقبة كل شيء صغير. يمكن لموقفك أن يتغير في أي لحظة!


أول ما يلفت الأنظار هو المكون البصري. إنها ألوان متناغمة ونماذج لطيفة ورسوم متحركة. حتى إذا كان عليك البقاء على قيد الحياة في Just Survive ، فلن تشعر بأي خوف. ويترتب على ذلك أن اللعبة مناسبة للاعبين من مختلف الأعمار.

يمكنك إنشاء مستوطنتك الخاصة ، والتي ستصبح ملاذًا للناجين. أي شخص يحب أن يشعر وكأنه عمدة أو مهندس معماري سيحب هذا.


هناك العديد من الشخصيات للاختيار من بينها في Just Survive. كلما زادت الخبرة في اللعبة ، زادت الأشكال والميزات. إذا قمت بتسجيل الدخول بانتظام ، فسوف تفاجأ عندما تجد أن اللعبة تتغير في كل مرة. وهذا لا يمنع التفاعل مع البيئة. بدلا من ذلك ، فإنه يقدم التنوع.


تقدم Just Survive العديد من الأوضاع والألعاب المصغرة. سيجد الجميع شيئًا خاصًا بهم هنا. هل تريد أن تدير؟ شارك في البناء! هل تحب المطاردات الديناميكية؟ ثم اهرب من الديناصور. ولا يتعين عليك دائمًا القيام بذلك بمفردك. يفتح Just Survive العديد من الاحتمالات ، ويمكن تغيير خيارات اللعب يوميًا على الأقل.


هناك إعلانات في Just Survive. بهذه الطريقة يمكنك تجربة اللعبة مجانًا. ومع ذلك ، للتخلص منه ، يكفي قطع الاتصال بالإنترنت.

يمنح المستخدمون Just Survive علامات جيدة بشكل استثنائي تقريبًا. فقط أولئك الذين لديهم مشاكل في التشغيل والتثبيت يتحدثون بشكل سيء عن المشروع. يحدث هذا عادةً بسبب جهاز قديم.

ابدأ بلعب Just Survive الآن!

إعلان

تحميل 1.10.11

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 1.10.11 (63)
تحميل التسجيل 2022-04-17 06:24
حجم 109.3 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 1.10.3 (37)
تحميل التسجيل 2021-11-29 21:26
حجم 112.48 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

الجديد في هذا الإصدار
-Bug Fixes
معلومات عامة
نص 1.10.1 (29)
تحميل التسجيل 2021-07-17 17:24
حجم 108.65 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

QUERY_ALL_PACKAGES

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

QUERY_ALL_PACKAGES

الجديد في هذا الإصدار
- New bonus levels
- New Skins!
- New Power Ups!
- Bug Fixes
معلومات عامة
نص 1.9.1 (24)
تحميل التسجيل 2021-06-10 17:29
حجم 100.06 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

QUERY_ALL_PACKAGES

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

QUERY_ALL_PACKAGES

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 1.8 (16)
تحميل التسجيل 2021-05-06 01:10
حجم 97.16 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

QUERY_ALL_PACKAGES

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

QUERY_ALL_PACKAGES

معلومات عامة
نص 1.7 (14)
تحميل التسجيل 2021-04-28 14:41
حجم 96.93 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

QUERY_ALL_PACKAGES

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

QUERY_ALL_PACKAGES

الجديد في هذا الإصدار
- Live version !
معلومات عامة
نص 1.0 (1)
تحميل التسجيل 2021-03-13 03:16
حجم 96.1 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

QUERY_ALL_PACKAGES

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

QUERY_ALL_PACKAGES

جميع التطبيقات Ketchapp في dev.mob-core.com

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك, واسمحوا لنا أن نعرف

2021/04/18 10:47
ألعاب ذات صلة:
© 2011-2024 mob-core.com