تحميل MapsWithMe برو v16.8.71842-googleRelease لالروبوت

برنامج الروبوت / ملاحة /

MapsWithMe برو

3.9 (184)

MapsWithMe برو

الاطلاع على ملفات أبك المتاحة

وصف:

أشعر بالراحة في أي رحلة - هذا هو مفتاح النجاح والخبرات ممتعة على مهلة، وذلك بفضل هذا البرنامج سوف تعرف دائما أين أنت، وكيفية الوصول إلى النقطة المطلوبة وأين هي العناصر الأكثر أهمية (البنوك وأجهزة الصراف الآلي، والفنادق، والمطاعم، محطات الوقود، الخ . الخ). المهم! في البداية، لا يحتوي البرنامج خريطة للعالم أجمع، وذلك قبل أن تذهب إلى بلد معين، يرجى تحميل الخريطة التي تحتاج إليها والاستمتاع واجهة سهلة الاستخدام، دون اتصال بالإنترنت في المستقبل. البرنامج يحتوي على خرائط لجميع مدن ودول العالم، حتى أصغر النوى، والتي لم يكن يتوقع، كما أن هناك بحث سهلة جدا للمساعدة في أي حالة.

الرابط إلى Google Play

إعلان

تحميل MapsWithMe برو v16.8.71842-googleRelease

الجديد في هذا الإصدار

Bug fixes.

معلومات عامة

نص	v16.8.71842-googleRelease (71842)
تحميل التسجيل	2025-05-10 03:14
حجم	183.85 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

FOREGROUND_SERVICE_SPECIAL_USE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

FOREGROUND_SERVICE_DATA_SYNC

FOREGROUND_SERVICE_LOCATION

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

FOREGROUND_SERVICE_SPECIAL_USE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

FOREGROUND_SERVICE_DATA_SYNC

FOREGROUND_SERVICE_LOCATION

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME v16.8.71836-googleRelease / 2025-04-29

الجديد في هذا الإصدار

Bug fixes.

معلومات عامة

نص	v16.8.71836-googleRelease (71836)
تحميل التسجيل	2025-04-29 17:08
حجم	183.84 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

FOREGROUND_SERVICE_SPECIAL_USE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

FOREGROUND_SERVICE_DATA_SYNC

FOREGROUND_SERVICE_LOCATION

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

FOREGROUND_SERVICE_SPECIAL_USE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

FOREGROUND_SERVICE_DATA_SYNC

FOREGROUND_SERVICE_LOCATION

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME v16.7.71827-googleRelease / 2025-05-10

الجديد في هذا الإصدار

Bug fixes.

معلومات عامة

نص	v16.7.71827-googleRelease (71827)
تحميل التسجيل	2025-05-10 03:14
حجم	181.55 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

FOREGROUND_SERVICE_SPECIAL_USE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

FOREGROUND_SERVICE_DATA_SYNC

FOREGROUND_SERVICE_LOCATION

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

FOREGROUND_SERVICE_SPECIAL_USE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

FOREGROUND_SERVICE_DATA_SYNC

FOREGROUND_SERVICE_LOCATION

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME v16.0.71790-googleRelease / 2024-12-15

الجديد في هذا الإصدار

Bug fixes.

معلومات عامة

نص	v16.0.71790-googleRelease (71790)
تحميل التسجيل	2024-12-15 07:39
حجم	179.62 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

FOREGROUND_SERVICE_SPECIAL_USE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

FOREGROUND_SERVICE_DATA_SYNC

FOREGROUND_SERVICE_LOCATION

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

FOREGROUND_SERVICE_SPECIAL_USE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

FOREGROUND_SERVICE_DATA_SYNC

FOREGROUND_SERVICE_LOCATION

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME v16.0.71787-googleRelease / 2024-12-12

الجديد في هذا الإصدار

Bug fixes.

معلومات عامة

نص	v16.0.71787-googleRelease (71787)
تحميل التسجيل	2024-12-12 11:55
حجم	179.62 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

FOREGROUND_SERVICE_SPECIAL_USE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

FOREGROUND_SERVICE_DATA_SYNC

FOREGROUND_SERVICE_LOCATION

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

FOREGROUND_SERVICE_SPECIAL_USE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

FOREGROUND_SERVICE_DATA_SYNC

FOREGROUND_SERVICE_LOCATION

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME v15.17.71782-googleRelease / 2024-12-05

الجديد في هذا الإصدار

In navigator mode, pedestrian paths and trails are now displayed.
Improved readability of water bodies and rivers.

معلومات عامة

نص	v15.17.71782-googleRelease (71782)
تحميل التسجيل	2024-12-05 01:19
حجم	179.56 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

FOREGROUND_SERVICE_SPECIAL_USE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

FOREGROUND_SERVICE_DATA_SYNC

FOREGROUND_SERVICE_LOCATION

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

FOREGROUND_SERVICE_SPECIAL_USE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

FOREGROUND_SERVICE_DATA_SYNC

FOREGROUND_SERVICE_LOCATION

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME v15.17.71782-googleRelease / 2024-12-15

الجديد في هذا الإصدار

Bug fixes.

معلومات عامة

نص	v15.17.71782-googleRelease (71782)
تحميل التسجيل	2024-12-15 07:39
حجم	179.56 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

FOREGROUND_SERVICE_SPECIAL_USE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

FOREGROUND_SERVICE_DATA_SYNC

FOREGROUND_SERVICE_LOCATION

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

FOREGROUND_SERVICE_SPECIAL_USE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

FOREGROUND_SERVICE_DATA_SYNC

FOREGROUND_SERVICE_LOCATION

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME v15.9.71723-googleRelease / 2024-07-15

الجديد في هذا الإصدار

Here's what's new:

- No more "Unable to calculate route" message when avoidance settings are enabled.
- Arrows have been removed from pedestrian routes.
- Fixed a crash when changing the type of transport in route planning.
- The screen issue after switching from portrait to landscape mode has been resolved.
- The size is retained after closing the PiP window and reopening the application.

Thank you for your support!

معلومات عامة

نص	v15.9.71723-googleRelease (71723)
تحميل التسجيل	2024-07-15 22:07
حجم	266.99 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME v15.7.71711-googleRelease / 2024-04-17

الجديد في هذا الإصدار

This new version brings:

- The new Hub section features the best offers and discounts for travelers
- Travel guides with the best routes around the world
- Up-to-date traffic alerts on road events
- Brand new Bookmarks section design
- Brand new Search section design
- Updated Object card design with the ability to add your review

معلومات عامة

نص	v15.7.71711-googleRelease (71711)
تحميل التسجيل	2024-04-17 01:44
حجم	271.99 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME v15.7.71702-googleRelease / 2024-02-19

الجديد في هذا الإصدار

This new version brings:

- The new Hub section features the best offers and discounts for travelers
- Travel guides with the best routes around the world
- Up-to-date traffic alerts on road events
- Brand new Bookmarks section design
- Brand new Search section design
- Updated Object card design with the ability to add your review

معلومات عامة

نص	v15.7.71702-googleRelease (71702)
تحميل التسجيل	2024-02-19 21:22
حجم	269.75 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME v15.6.71691-googleRelease / 2024-01-17

الجديد في هذا الإصدار

This new version brings:

- The new Hub section features the best offers and discounts for travelers
- Travel guides with the best routes around the world
- Up-to-date traffic alerts on road events
- Brand new Bookmarks section design
- Brand new Search section design
- Updated Object card design with the ability to add your review

معلومات عامة

نص	v15.6.71691-googleRelease (71691)
تحميل التسجيل	2024-01-17 01:18
حجم	268.15 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME v15.5.71676-googleRelease / 2023-12-20

الجديد في هذا الإصدار

This new version brings:

- The new Hub section features the best offers and discounts for travelers
- Travel guides with the best routes around the world
- Up-to-date traffic alerts on road events
- Brand new Bookmarks section design
- Brand new Search section design
- Updated Object card design with the ability to add your review

معلومات عامة

نص	v15.5.71676-googleRelease (71676)
تحميل التسجيل	2023-12-20 00:03
حجم	268.37 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME v15.5.71668-googleRelease / 2023-11-26

الجديد في هذا الإصدار

This new version brings:

- The new Hub section features the best offers and discounts for travelers
- Travel guides with the best routes around the world
- Up-to-date traffic alerts on road events
- Brand new Bookmarks section design
- Brand new Search section design
- Updated Object card design with the ability to add your review

معلومات عامة

نص	v15.5.71668-googleRelease (71668)
تحميل التسجيل	2023-11-26 01:19
حجم	267.26 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME v15.5.71665-googleRelease / 2023-11-18

الجديد في هذا الإصدار

This new version brings:

- The new Hub section features the best offers and discounts for travelers
- Travel guides with the best routes around the world
- Up-to-date traffic alerts on road events
- Brand new Bookmarks section design
- Brand new Search section design
- Updated Object card design with the ability to add your review

معلومات عامة

نص	v15.5.71665-googleRelease (71665)
تحميل التسجيل	2023-11-18 13:11
حجم	267.25 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME v15.2.71630-googleRelease / 2023-09-01

الجديد في هذا الإصدار

This new version brings:

- The new Hub section features the best offers and discounts for travelers
- Travel guides with the best routes around the world
- Up-to-date traffic alerts on road events
- Brand new Bookmarks section design
- Brand new Search section design
- Updated Object card design with the ability to add your review

معلومات عامة

نص	v15.2.71630-googleRelease (71630)
تحميل التسجيل	2023-09-01 20:39
حجم	296.28 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to control the vibrator.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

USE_BIOMETRIC

USE_FINGERPRINT

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to control the vibrator.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

USE_BIOMETRIC

USE_FINGERPRINT

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

MAPS.ME v15.2.71629-googleRelease / 2023-08-28

الجديد في هذا الإصدار

This new version brings:

- The new Hub section features the best offers and discounts for travelers
- Travel guides with the best routes around the world
- Up-to-date traffic alerts on road events
- Brand new Bookmarks section design
- Brand new Search section design
- Updated Object card design with the ability to add your review

معلومات عامة

نص	v15.2.71629-googleRelease (71629)
تحميل التسجيل	2023-08-28 22:02
حجم	296.28 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to control the vibrator.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

USE_BIOMETRIC

USE_FINGERPRINT

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to control the vibrator.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

USE_BIOMETRIC

USE_FINGERPRINT

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

MAPS.ME v15.1.71626-googleRelease / 2023-08-14

الجديد في هذا الإصدار

This new version brings:

- The new Hub section features the best offers and discounts for travelers
- Travel guides with the best routes around the world
- Up-to-date traffic alerts on road events
- Brand new Bookmarks section design
- Brand new Search section design
- Updated Object card design with the ability to add your review

معلومات عامة

نص	v15.1.71626-googleRelease (71626)
تحميل التسجيل	2023-08-14 22:02
حجم	279.91 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to control the vibrator.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to control the vibrator.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

MAPS.ME v15.0.71618-googleRelease / 2023-07-31

الجديد في هذا الإصدار

This new version brings:
- Up-to-date traffic alerts on road events
- Brand new Bookmarks section design
- Brand new Search section design
- Updated Object card design with the ability to add your review
- Travel guides with the best routes around the world

معلومات عامة

نص	v15.0.71618-googleRelease (71618)
تحميل التسجيل	2023-07-31 23:23
حجم	276.16 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to control the vibrator.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to control the vibrator.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

MAPS.ME v14.7.71595-googleRelease / 2023-07-07

الجديد في هذا الإصدار

In the new Maps.me version you can:
- Add your friends to MAPS.ME
- Share your location with your friends
- Add your profile photo
- Save your parking spot
- Switch new map styles in layers flow
- Get notification about routing in background

معلومات عامة

نص	v14.7.71595-googleRelease (71595)
تحميل التسجيل	2023-07-07 00:57
حجم	274.37 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to control the vibrator.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to control the vibrator.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

MAPS.ME v14.7.71581-googleRelease / 2023-06-14

الجديد في هذا الإصدار

In the new Maps.me version you can:
- Add your friends to MAPS.ME
- Share your location with your friends
- Add your profile photo
- Save your parking spot
- Switch new map styles in layers flow
- Get notification about routing in background

معلومات عامة

نص	v14.7.71581-googleRelease (71581)
تحميل التسجيل	2023-06-14 02:39
حجم	273.86 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to control the vibrator.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

POST_NOTIFICATIONS

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to control the vibrator.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

MAPS.ME v14.6.71566-googleRelease / 2023-05-25

الجديد في هذا الإصدار

In the new Maps.me version you can:
- Add your friends to MAPS.ME
- Share your location with your friends
- Add your profile photo
- Save your parking spot
- Switch new map styles in layers flow
- Get notification about routing in background

معلومات عامة

نص	v14.6.71566-googleRelease (71566)
تحميل التسجيل	2023-05-25 19:55
حجم	271.52 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

MAPS.ME v14.4.71543-googleRelease / 2023-04-05

الجديد في هذا الإصدار

- the navigator is even more convenient with the ability to move along the lanes
- you can record your route and share it with friends
- add an additional phone number to your account
- find the bookmarks you need in the search menu
- The new version of the application adds the ability to launch MAPS.ME via Android Auto

معلومات عامة

نص	v14.4.71543-googleRelease (71543)
تحميل التسجيل	2023-04-05 12:46
حجم	398.94 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

record audio

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

record audio

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

MAPS.ME v14.4.71535-googleRelease / 2023-03-29

الجديد في هذا الإصدار

- the navigator is even more convenient with the ability to move along the lanes
- you can record your route and share it with friends
- add an additional phone number to your account
- find the bookmarks you need in the search menu
- The new version of the application adds the ability to launch MAPS.ME via Android Auto

معلومات عامة

نص	v14.4.71535-googleRelease (71535)
تحميل التسجيل	2023-03-29 12:38
حجم	398.97 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

record audio

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

record audio

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

MAPS.ME v14.4.71530-googleRelease / 2023-03-24

الجديد في هذا الإصدار

- the navigator is even more convenient with the ability to move along the lanes
- you can record your route and share it with friends
- add an additional phone number to your account
- find the bookmarks you need in the search menu
- The new version of the application adds the ability to launch MAPS.ME via Android Auto

معلومات عامة

نص	v14.4.71530-googleRelease (71530)
تحميل التسجيل	2023-03-24 12:43
حجم	427.15 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

record audio

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

record audio

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

MAPS.ME v14.4.71527-googleRelease / 2023-03-23

الجديد في هذا الإصدار

- the navigator is even more convenient with the ability to move along the lanes
- you can record your route and share it with friends
- add an additional phone number to your account
- find the bookmarks you need in the search menu
- The new version of the application adds the ability to launch MAPS.ME via Android Auto

معلومات عامة

نص	v14.4.71527-googleRelease (71527)
تحميل التسجيل	2023-03-23 20:48
حجم	427.13 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

record audio

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

record audio

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

MAPS.ME v14.3.71503-googleRelease / 2023-02-24

الجديد في هذا الإصدار

- the navigator is even more convenient with the ability to move along the lanes
- get new alternative routes
- you can record your route and share it with friends
- add an additional phone number to your account
- find the bookmarks you need in the search menu
- to make it easier for you to use, the size of the pins have been increased
- you can now change the language in the app

معلومات عامة

نص	v14.3.71503-googleRelease (71503)
تحميل التسجيل	2023-02-24 00:59
حجم	411.04 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

record audio

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

record audio

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

MAPS.ME v14.3.71502-googleRelease / 2023-02-20

الجديد في هذا الإصدار

- the navigator is even more convenient with the ability to move along the lanes
- get new alternative routes
- you can record your route and share it with friends
- add an additional phone number to your account
- find the bookmarks you need in the search menu
- to make it easier for you to use, the size of the pins have been increased
- you can now change the language in the app

معلومات عامة

نص	v14.3.71502-googleRelease (71502)
تحميل التسجيل	2023-02-20 12:46
حجم	410.62 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

record audio

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

record audio

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

MAPS.ME v14.2.71494-googleRelease / 2023-02-04

الجديد في هذا الإصدار

- Map controls updated for a smooth interaction
- Settings sections redesigned
- Now you can add links in bookmark description
- We added GPX file support for routes import
- Now you can edit OpenStreetMap places which you added
- Dear friend, especially for you, we have added the voiceover of the navigator with Cantonese dialect

معلومات عامة

نص	v14.2.71494-googleRelease (71494)
تحميل التسجيل	2023-02-04 07:44
حجم	416.94 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

FOREGROUND_SERVICE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

record audio

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

FOREGROUND_SERVICE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

record audio

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

WRITE_EMBEDDED_SUBSCRIPTIONS

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

USE_BIOMETRIC

USE_FINGERPRINT

MAPS.ME v14.2.71484-googleRelease / 2023-01-21

الجديد في هذا الإصدار

- Map controls updated for a smooth interaction
- Settings sections redesigned
- Now you can add links in bookmark description
- We added GPX file support for routes import
- Now you can edit OpenStreetMap places which you added
- Dear friend, especially for you, we have added the voiceover of the navigator with Cantonese dialect

معلومات عامة

نص	v14.2.71484-googleRelease (71484)
تحميل التسجيل	2023-01-21 07:46
حجم	413.72 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

READ_MEDIA_IMAGES

READ_MEDIA_AUDIO

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.2.71476-googleRelease / 2023-01-01

الجديد في هذا الإصدار

- Map controls updated for a smooth interaction
- Settings sections redesigned
- Now you can add links in bookmark description
- We added GPX file support for routes import
- Now you can edit OpenStreetMap places which you added
- Dear friend, especially for you, we have added the voiceover of the navigator with Cantonese dialect

معلومات عامة

نص	v14.2.71476-googleRelease (71476)
تحميل التسجيل	2023-01-01 02:19
حجم	401.67 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the vibrator.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.2.71463-googleRelease / 2022-12-06

الجديد في هذا الإصدار

- Map controls updated for a smooth interaction
- Settings sections redesigned
- Now you can add links in bookmark description
- We added GPX file support for routes import
- Now you can edit OpenStreetMap places which you added
- Dear friend, especially for you, we have added the voiceover of the navigator with Cantonese dialect

معلومات عامة

نص	v14.2.71463-googleRelease (71463)
تحميل التسجيل	2022-12-06 00:50
حجم	396.68 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.2.71462-googleRelease / 2022-12-01

الجديد في هذا الإصدار

- Map controls updated for a smooth interaction
- Settings sections redesigned
- Now you can add links in bookmark description
- We added GPX file support for routes import
- Now you can edit OpenStreetMap places which you added
- In the latest version you can download and upload your recent track.

معلومات عامة

نص	v14.2.71462-googleRelease (71462)
تحميل التسجيل	2022-12-01 21:29
حجم	396.63 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.2.71457-googleRelease / 2022-11-21

الجديد في هذا الإصدار

- Map controls updated for a smooth interaction
- Settings sections redesigned
- Now you can add links in bookmark description
- We added GPX file support for routes import
- Now you can edit OpenStreetMap places which you added
- Dear friend, especially for you, we have added the voiceover of the navigator with Cantonese dialect

معلومات عامة

نص	v14.2.71457-googleRelease (71457)
تحميل التسجيل	2022-11-21 13:00
حجم	399.98 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

BLUETOOTH_CONNECT

BLUETOOTH_SCAN

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.2.71451-googleRelease / 2022-11-14

الجديد في هذا الإصدار

- Map controls updated for a smooth interaction
- Settings sections redesigned
- Now you can add links in bookmark description
- We added GPX file support for routes import
- Now you can edit OpenStreetMap places which you added
- Dear friend, especially for you, we have added the voiceover of the navigator with Cantonese dialect

معلومات عامة

نص	v14.2.71451-googleRelease (71451)
تحميل التسجيل	2022-11-14 20:30
حجم	398.34 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.2.71444-googleRelease / 2022-11-01

الجديد في هذا الإصدار

- Map controls updated for a smooth interaction
- Settings sections redesigned
- Now you can add links in bookmark description
- We added GPX file support for routes import
- Now you can edit OpenStreetMap places which you added
- Dear friend, especially for you, we have added the voiceover of the navigator with Cantonese dialect

معلومات عامة

نص	v14.2.71444-googleRelease (71444)
تحميل التسجيل	2022-11-01 13:44
حجم	396.77 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.2.71438-googleRelease / 2022-10-28

الجديد في هذا الإصدار

- Map controls updated for a smooth interaction
- Settings sections redesigned
- Now you can add links in bookmark description
- We added GPX file support for routes import
- Now you can edit OpenStreetMap places which you added
- Dear friend, especially for you, we have added the voiceover of the navigator with Cantonese dialect

معلومات عامة

نص	v14.2.71438-googleRelease (71438)
تحميل التسجيل	2022-10-28 21:27
حجم	396.47 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.1.71403-googleRelease / 2022-10-06

الجديد في هذا الإصدار

- Add points from your Favourites when building a route
- Add Bookmarks with one tap – quick and easy
- Hide map elements by tapping on map
- Added "View on Map" in Routing screen

معلومات عامة

نص	v14.1.71403-googleRelease (71403)
تحميل التسجيل	2022-10-06 01:39
حجم	376.72 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.1.71400-googleRelease / 2022-09-23

الجديد في هذا الإصدار

- Add points from your Favourites when building a route
- Add Bookmarks with one tap – quick and easy
- Hide map elements by tapping on map
- Added "View on Map" in Routing screen

معلومات عامة

نص	v14.1.71400-googleRelease (71400)
تحميل التسجيل	2022-09-23 11:56
حجم	374.92 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

POST_NOTIFICATIONS

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.1.71391-googleRelease / 2022-09-02

الجديد في هذا الإصدار

- Add points from your Favourites when building a route
- Add Bookmarks with one tap – quick and easy
- Hide map elements by tapping on map
- Added "View on Map" in Routing screen

معلومات عامة

نص	v14.1.71391-googleRelease (71391)
تحميل التسجيل	2022-09-02 21:52
حجم	374 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

POST_NOTIFICATIONS

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

POST_NOTIFICATIONS

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.1.71386-googleRelease / 2022-08-23

الجديد في هذا الإصدار

- Add points from your Favourites when building a route
- Add Bookmarks with one tap – quick and easy
- Hide map elements by tapping on map
- Added "View on Map" in Routing screen

معلومات عامة

نص	v14.1.71386-googleRelease (71386)
تحميل التسجيل	2022-08-23 06:05
حجم	373.63 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

POST_NOTIFICATIONS

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

POST_NOTIFICATIONS

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.1.71381-googleRelease / 2022-08-17

الجديد في هذا الإصدار

- Add points from your Favourites when building a route
- Add Bookmarks with one tap – quick and easy
- Hide map elements by tapping on map
- Added "View on Map" in Routing screen

معلومات عامة

نص	v14.1.71381-googleRelease (71381)
تحميل التسجيل	2022-08-17 12:14
حجم	372.47 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

POST_NOTIFICATIONS

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

POST_NOTIFICATIONS

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.0.71372-googleRelease / 2022-07-31

الجديد في هذا الإصدار

- Add points from your Favourites when building a route
- Add Bookmarks with one tap – quick and easy
- Hide map elements by tapping on map
- Added "View on Map" in Routing screen

معلومات عامة

نص	v14.0.71372-googleRelease (71372)
تحميل التسجيل	2022-07-31 14:16
حجم	370.07 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

ACCESS_BACKGROUND_LOCATION

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

ACCESS_BACKGROUND_LOCATION

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.0.71368-googleRelease / 2022-07-31

الجديد في هذا الإصدار

- Add points from your Favourites when building a route
- Add Bookmarks with one tap – quick and easy
- Hide map elements by tapping on map
- Added "View on Map" in Routing screen

معلومات عامة

نص	v14.0.71368-googleRelease (71368)
تحميل التسجيل	2022-07-31 14:17
حجم	369.35 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

ACCESS_BACKGROUND_LOCATION

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

ACCESS_BACKGROUND_LOCATION

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

MAPS.ME v14.0.71356-googleRelease / 2022-07-16

الجديد في هذا الإصدار

– Brand new design for search and place cards: manage your favourite places, split them into categories and pin for a quick access
– Search best hotels on booking.com: use hotel star rating and other filters
– Route building and active navigation in the application: the logic of route building has been redesigned, now you can conveniently add waypoints from the search or on the map
– Updated bookmarks section: new custom way to work with your bookmarks

معلومات عامة

نص	v14.0.71356-googleRelease (71356)
تحميل التسجيل	2022-07-16 06:40
حجم	364.32 MB
العربية	لا

متطلبات

الروبوت	6.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

ACCESS_BACKGROUND_LOCATION

USE_BIOMETRIC

USE_FINGERPRINT

FOREGROUND_SERVICE

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

MAPS.ME 12.3.3-Google / 2022-04-13

الجديد في هذا الإصدار

With each App update, the maps are filled with new places to make your trip interesting.

معلومات عامة

نص	12.3.3-Google (71254)
تحميل التسجيل	2022-04-13 19:01
حجم	226.56 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to control the vibrator.

MAPS.ME 12.3.2-Google / 2021-11-26

الجديد في هذا الإصدار

NO. 1 TRAVEL MAPS
Search & discover, tourist guides and navigation available offline all over the world.
This update includes bookmarks recovery, offline maps, bug fixes and performance improvements.

معلومات عامة

نص	12.3.2-Google (71251)
تحميل التسجيل	2021-11-26 09:02
حجم	226.74 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to control the vibrator.

MAPS.ME 12.3.1-Google / 2021-11-02

الجديد في هذا الإصدار

NO. 1 TRAVEL MAPS
Search & discover, tourist guides and navigation available offline all over the world.
This update includes bookmarks recovery, offline maps, bug fixes and performance improvements.

معلومات عامة

نص	12.3.1-Google (71249)
تحميل التسجيل	2021-11-02 12:14
حجم	226.59 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to control the vibrator.

MAPS.ME 12.3.0-Google / 2021-07-31

الجديد في هذا الإصدار

NO. 1 TRAVEL MAPS
Search & discover, tourist guides and navigation available offline all over the world.
This update includes bookmarks recovery, offline maps, bug fixes and performance improvements.

معلومات عامة

نص	12.3.0-Google (71247)
تحميل التسجيل	2021-07-31 11:55
حجم	226.95 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

ACCESS_BACKGROUND_LOCATION

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

ACCESS_BACKGROUND_LOCATION

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to control the vibrator.

MAPS.ME 12.2.1-Google / 2021-06-10

الجديد في هذا الإصدار

NO. 1 TRAVEL MAPS
Search & discover, tourist guides and navigation available offline all over the world.
This update includes bookmarks recovery, offline maps, bug fixes and performance improvements.

معلومات عامة

نص	12.2.1-Google (71232)
تحميل التسجيل	2021-06-10 05:18
حجم	226.72 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

ACCESS_BACKGROUND_LOCATION

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

ACCESS_BACKGROUND_LOCATION

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to control the vibrator.

MAPS.ME 12.2.0-Google / 2021-05-31

الجديد في هذا الإصدار

NO. 1 TRAVEL MAPS
Search & discover, tourist guides and navigation available offline all over the world.
This update includes bookmarks recovery, offline maps, bug fixes and performance improvements.

معلومات عامة

نص	12.2.0-Google (71221)
تحميل التسجيل	2021-05-31 19:00
حجم	226.32 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM8 ARM7 x86_64 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

ACCESS_BACKGROUND_LOCATION

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

record audio

Allows the app to read the contents of your USB storage.

ACCESS_BACKGROUND_LOCATION

USE_BIOMETRIC

USE_FINGERPRINT

Allows the app to control the vibrator.

com.mapswithme.maps.pro 12.0.4-Google / 2021-02-06

الجديد في هذا الإصدار

NO. 1 TRAVEL MAPS
Search & discover, tourist guides and navigation available offline all over the world.
This update includes bookmarks recovery, offline maps, bug fixes and performance improvements.

معلومات عامة

نص	12.0.4-Google (71205)
تحميل التسجيل	2021-02-06 08:26
حجم	91.87 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

com.mapswithme.maps.pro 12.0.1-Google / 2021-01-09

الجديد في هذا الإصدار

NO. 1 TRAVEL MAPS
Search & discover, tourist guides and navigation available offline all over the world.
This update includes bookmarks recovery, offline maps, bug fixes and performance improvements.

معلومات عامة

نص	12.0.1-Google (71202)
تحميل التسجيل	2021-01-09 08:08
حجم	92.58 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

MAPS.ME 10.2.3-Google / 2020-11-10

الجديد في هذا الإصدار

With each App update, the maps are filled with new places to make your trip interesting.

Thanks to the maps update by the OSM community, in this version were added:
1400+ attractions
10000+ cafes and restaurants
6500+ shops

معلومات عامة

نص	10.2.3-Google (51023)
تحميل التسجيل	2020-11-10 16:09
حجم	67.01 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.2.2-Google / 2020-09-18

الجديد في هذا الإصدار

- Booking hotels on the map has become even more convenient! Now you can select dates, number of guests, and use filters with rating, price category and type of accommodation.
- The app now has a 7-day trial for travel guides catalog subscription. Try the new travel and outdoor functionality for free.

معلومات عامة

نص	10.2.2-Google (51022)
تحميل التسجيل	2020-09-18 05:11
حجم	66.99 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.1.6-Google / 2020-09-11

الجديد في هذا الإصدار

- Booking hotels on the map has become even more convenient! Now you can select dates, number of guests, and use filters with rating, price category and type of accommodation.
- The app now has a 7-day trial for travel guides catalog subscription. Try the new travel and outdoor functionality for free.

معلومات عامة

نص	10.1.6-Google (51016)
تحميل التسجيل	2020-09-11 12:07
حجم	66.09 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.1.4-Google / 2020-08-20

الجديد في هذا الإصدار

With each App update, the maps are filled with new places to make your trip interesting.

Thanks to the maps update by the OSM community, in this version were added:
1400+ attractions
10000+ cafes and restaurants
6500+ shops

معلومات عامة

نص	10.1.4-Google (51014)
تحميل التسجيل	2020-08-20 09:12
حجم	66.07 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.1.3-Google / 2020-07-07

الجديد في هذا الإصدار

We have launched a new layer with guides on the map. Activate it in the application settings menu to quickly find interesting city routes and guides for outdoor activities.

معلومات عامة

نص	10.1.3-Google (51013)
تحميل التسجيل	2020-07-07 14:59
حجم	65.49 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.0.5-Google / 2020-06-13

الجديد في هذا الإصدار

An elevation profile will be available in newly purchased guides. Evaluate the difficulty of the upcoming track offline with a special cursor.
Download and try in the "Free samples" section of the catalog.

معلومات عامة

نص	10.0.5-Google (51005)
تحميل التسجيل	2020-06-13 05:10
حجم	65.19 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.0.3-Google / 2020-05-07

الجديد في هذا الإصدار

With each App update, the maps are filled with new places to make your trip interesting.

Thanks to the maps update by the OSM community, in this version were added:
3000+ attractions
25000+ cafes and restaurants
17000+ shops

معلومات عامة

نص	10.0.3-Google (51003)
تحميل التسجيل	2020-05-07 18:47
حجم	65.18 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.6.1-Google / 2020-03-07

الجديد في هذا الإصدار

We've added graphic layer of the heights. Mountain and hill navigation has become easier. To enable heightmapping press the layer button in the top left corner of the screen and choose “Terrain”. The function is available offline.
To use the option “Terrain”, update the downloaded maps.
This time were added:
5000+ attractions
45000+ cafés and restaurants
25000+ shops

معلومات عامة

نص	9.6.1-Google (50961)
تحميل التسجيل	2020-03-07 06:16
حجم	58.11 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.5.2-Google / 2020-01-04

الجديد في هذا الإصدار

New routes, guides gallery and bookmarks

• Subscription for outdoor enthusiasts City + Outdoor Pass: 15,000+ routes for nature and cities
• Routes are now in pages of attractions: read about interesting places and choose guides that include them
• New icons and colors for bookmarks

*Guides are available in the subscription in English and German, we will add other languages soon

معلومات عامة

نص	9.5.2-Google (50952)
تحميل التسجيل	2020-01-04 18:41
حجم	58.01 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.4.7-Google / 2019-12-22

الجديد في هذا الإصدار

This version includes bug fixes.

معلومات عامة

نص	9.4.7-Google (50947)
تحميل التسجيل	2019-12-22 14:31
حجم	57.02 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.4.3-Google / 2019-10-31

الجديد في هذا الإصدار

We have fixed a bug that caused the app crash

معلومات عامة

نص	9.4.3-Google (50943)
تحميل التسجيل	2019-10-31 11:41
حجم	56.86 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.4.1-Google / 2019-10-10

الجديد في هذا الإصدار

In the new version, we have significantly increased the speed of updating the sections of the maps that were changed. Now the update will be 2–5 times faster depending on the model of your phone or tablet, and the traffic consumption will remain low, cause only the changed sections are loaded, not the whole maps.

معلومات عامة

نص	9.4.1-Google (50941)
تحميل التسجيل	2019-10-10 09:01
حجم	56.86 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.3.1-Google / 2019-09-15

الجديد في هذا الإصدار

Bookmarks are now even easier to use! You can:
- Find bookmarks faster with the Search. You can search by place name or your bookmark name.
- Sort bookmarks by type (Food, Museums, etc.), time of addition and location: by cities and places within 20 km from you. Sorting type can be chosen on the lower menu of the bookmarks list.

معلومات عامة

نص	9.3.1-Google (50931)
تحميل التسجيل	2019-09-15 18:16
حجم	56.22 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.2.3-Google / 2019-09-01

الجديد في هذا الإصدار

We have launched a subscription to the MAPS.ME travel guides catalogue!
Now you don't need to buy a separate route, because you can get unlimited access to the entire library of MAPS.ME guidebooks all at once!
Hundreds of interesting places and unique locations, and everything works without the Internet. Just choose between two plans: monthly or annual, and use the routes on any trip!
* Map rendering fix for Mediatek MT6739 chipset family

معلومات عامة

نص	9.2.3-Google (50923)
تحميل التسجيل	2019-09-01 09:50
حجم	56.74 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.2.3-Google / 2020-11-10

الجديد في هذا الإصدار

With each App update, the maps are filled with new places to make your trip interesting.

Thanks to the maps update by the OSM community, in this version were added:
1400+ attractions
10000+ cafes and restaurants
6500+ shops

معلومات عامة

نص	10.2.3-Google (41023)
تحميل التسجيل	2020-11-10 16:09
حجم	68.13 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.2.2-Google / 2020-09-18

الجديد في هذا الإصدار

- Booking hotels on the map has become even more convenient! Now you can select dates, number of guests, and use filters with rating, price category and type of accommodation.
- The app now has a 7-day trial for travel guides catalog subscription. Try the new travel and outdoor functionality for free.

معلومات عامة

نص	10.2.2-Google (41022)
تحميل التسجيل	2020-09-18 05:10
حجم	68.12 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.1.6-Google / 2020-09-11

الجديد في هذا الإصدار

New design of the guides catalog. Planning future trips is easier now.

معلومات عامة

نص	10.1.6-Google (41016)
تحميل التسجيل	2020-09-11 12:06
حجم	67.2 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.1.4-Google / 2020-08-20

الجديد في هذا الإصدار

With each App update, the maps are filled with new places to make your trip interesting.

Thanks to the maps update by the OSM community, in this version were added:
1400+ attractions
10000+ cafes and restaurants
6500+ shops

معلومات عامة

نص	10.1.4-Google (41014)
تحميل التسجيل	2020-08-20 09:12
حجم	67.18 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.1.3-Google / 2020-07-07

الجديد في هذا الإصدار

We have launched a new layer with guides on the map. Activate it in the application settings menu to quickly find interesting city routes and guides for outdoor activities.

معلومات عامة

نص	10.1.3-Google (41013)
تحميل التسجيل	2020-07-07 14:59
حجم	66.6 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.0.5-Google / 2020-06-13

الجديد في هذا الإصدار

An elevation profile will be available in newly purchased guides. Evaluate the difficulty of the upcoming track offline with a special cursor.
Download and try in the "Free samples" section of the catalog.

معلومات عامة

نص	10.0.5-Google (41005)
تحميل التسجيل	2020-06-13 05:10
حجم	66.28 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.0.3-Google / 2020-05-07

الجديد في هذا الإصدار

With each App update, the maps are filled with new places to make your trip interesting.

Thanks to the maps update by the OSM community, in this version were added:
3000+ attractions
25000+ cafes and restaurants
17000+ shops

معلومات عامة

نص	10.0.3-Google (41003)
تحميل التسجيل	2020-05-07 18:47
حجم	66.27 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.6.1-Google / 2020-03-07

الجديد في هذا الإصدار

We've added graphic layer of the heights. Mountain and hill navigation has become easier. To enable heightmapping press the layer button in the top left corner of the screen and choose “Terrain”. The function is available offline.
To use the option “Terrain”, update the downloaded maps.
This time were added:
5000+ attractions
45000+ cafés and restaurants
25000+ shops

معلومات عامة

نص	9.6.1-Google (40961)
تحميل التسجيل	2020-03-07 06:16
حجم	58.92 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.5.2-Google / 2020-01-04

الجديد في هذا الإصدار

New routes, guides gallery and bookmarks

• Subscription for outdoor enthusiasts City + Outdoor Pass: 15,000+ routes for nature and cities
• Routes are now in pages of attractions: read about interesting places and choose guides that include them
• New icons and colors for bookmarks

*Guides are available in the subscription in English and German, we will add other languages soon

معلومات عامة

نص	9.5.2-Google (40952)
تحميل التسجيل	2020-01-04 18:41
حجم	58.83 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.4.7-Google / 2019-12-22

الجديد في هذا الإصدار

This version includes bug fixes.

معلومات عامة

نص	9.4.7-Google (40947)
تحميل التسجيل	2019-12-22 14:31
حجم	57.86 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.2.3-Google / 2020-11-10

الجديد في هذا الإصدار

With each App update, the maps are filled with new places to make your trip interesting.

Thanks to the maps update by the OSM community, in this version were added:
1400+ attractions
10000+ cafes and restaurants
6500+ shops

معلومات عامة

نص	10.2.3-Google (31023)
تحميل التسجيل	2020-11-10 16:09
حجم	64.49 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.2.2-Google / 2020-09-18

الجديد في هذا الإصدار

- Booking hotels on the map has become even more convenient! Now you can select dates, number of guests, and use filters with rating, price category and type of accommodation.
- The app now has a 7-day trial for travel guides catalog subscription. Try the new travel and outdoor functionality for free.

معلومات عامة

نص	10.2.2-Google (31022)
تحميل التسجيل	2020-09-18 05:10
حجم	64.47 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.1.6-Google / 2020-09-11

الجديد في هذا الإصدار

New design of the guides catalog. Planning future trips is easier now.

معلومات عامة

نص	10.1.6-Google (31016)
تحميل التسجيل	2020-09-11 12:07
حجم	63.61 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.1.4-Google / 2020-08-20

الجديد في هذا الإصدار

With each App update, the maps are filled with new places to make your trip interesting.

Thanks to the maps update by the OSM community, in this version were added:
1400+ attractions
10000+ cafes and restaurants
6500+ shops

معلومات عامة

نص	10.1.4-Google (31014)
تحميل التسجيل	2020-08-20 09:12
حجم	63.59 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.1.3-Google / 2020-07-07

الجديد في هذا الإصدار

We have launched a new layer with guides on the map. Activate it in the application settings menu to quickly find interesting city routes and guides for outdoor activities.

معلومات عامة

نص	10.1.3-Google (31013)
تحميل التسجيل	2020-07-07 14:59
حجم	63.02 MB
العربية	لا

متطلبات

الروبوت	5.0+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.0.5-Google / 2020-06-13

الجديد في هذا الإصدار

An elevation profile will be available in newly purchased guides. Evaluate the difficulty of the upcoming track offline with a special cursor.
Download and try in the "Free samples" section of the catalog.

معلومات عامة

نص	10.0.5-Google (31005)
تحميل التسجيل	2020-06-13 05:10
حجم	62.77 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 10.0.3-Google / 2020-05-07

الجديد في هذا الإصدار

With each App update, the maps are filled with new places to make your trip interesting.

Thanks to the maps update by the OSM community, in this version were added:
3000+ attractions
25000+ cafes and restaurants
17000+ shops

معلومات عامة

نص	10.0.3-Google (31003)
تحميل التسجيل	2020-05-07 18:47
حجم	62.75 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.6.1-Google / 2020-03-07

الجديد في هذا الإصدار

We've added graphic layer of the heights. Mountain and hill navigation has become easier. To enable heightmapping press the layer button in the top left corner of the screen and choose “Terrain”. The function is available offline.
To use the option “Terrain”, update the downloaded maps.
This time were added:
5000+ attractions
45000+ cafés and restaurants
25000+ shops

معلومات عامة

نص	9.6.1-Google (30961)
تحميل التسجيل	2020-03-07 06:16
حجم	56.44 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.5.2-Google / 2020-01-04

الجديد في هذا الإصدار

New routes, guides gallery and bookmarks

• Subscription for outdoor enthusiasts City + Outdoor Pass: 15,000+ routes for nature and cities
• Routes are now in pages of attractions: read about interesting places and choose guides that include them
• New icons and colors for bookmarks

*Guides are available in the subscription in English and German, we will add other languages soon

معلومات عامة

نص	9.5.2-Google (30952)
تحميل التسجيل	2020-01-04 18:41
حجم	56.35 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.4.7-Google / 2019-12-22

الجديد في هذا الإصدار

This version includes bug fixes.

معلومات عامة

نص	9.4.7-Google (30947)
تحميل التسجيل	2019-12-22 14:31
حجم	55.36 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.4.1-Google / 2019-10-10

الجديد في هذا الإصدار

In the new version, we have significantly increased the speed of updating the sections of the maps that were changed. Now the update will be 2–5 times faster depending on the model of your phone or tablet, and the traffic consumption will remain low, cause only the changed sections are loaded, not the whole maps.

معلومات عامة

نص	9.4.1-Google (30941)
تحميل التسجيل	2019-10-10 09:01
حجم	55.21 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.1.8-Google / 2019-07-06

الجديد في هذا الإصدار

During each update we add more new places to our maps to make your journey even more enjoyable.

This time we've added:
3000+ attractions
20000+ cafés and restaurants
12000+ shops

معلومات عامة

نص	9.1.8-Google (3918)
تحميل التسجيل	2019-07-06 13:53
حجم	55.24 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM8

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.1.7-Google / 2019-06-04

الجديد في هذا الإصدار

We have updated our guidebook directory. Now it'll be even easier to choose the right one:

- Guides and cities have their own pages
- Guide maps contain previews of points on the map, the length of the route and a brief description about it
- All the information available for a city guide will be displayed on city pages

معلومات عامة

نص	9.1.7-Google (2917)
تحميل التسجيل	2019-06-04 21:52
حجم	56.06 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.1.5-Google / 2019-05-28

الجديد في هذا الإصدار

We've marked toll and dirt roads and even ferry crossings on the maps:

- When a route is under construction, the paved and unpaved sections will be displayed on the map (if your route happens to come across them)
- You can configure detour routes in the app itself or in the built auto route by clicking on the road icon

معلومات عامة

نص	9.1.5-Google (2915)
تحميل التسجيل	2019-05-28 04:21
حجم	56.04 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.6.3-Google / 2019-02-25

الجديد في هذا الإصدار

Now you can purchase more than 700 partner routes from different categories:

- Basic: a set of main locations and a brief description
- City Overview: up to 200 of the most useful and interesting points around the city
- PRO: routes with detailed descriptions, historical information, the ability to calculate the time and distance of the walk

Updated maps, added:
- 15,000+ cafés and restaurants
- 9,000+ shops
- 8,000+ sights
- 5,000+ hotels and hostels

معلومات عامة

نص	8.6.3-Google (2863)
تحميل التسجيل	2019-02-25 06:55
حجم	53.53 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.6.2-Google / 2018-12-27

الجديد في هذا الإصدار

Updated maps:
- Traveling became easier and safer with the new algorithm of route planning
- Dive into the new emotions faster with the updated search in categories

معلومات عامة

نص	8.6.2-Google (2862)
تحميل التسجيل	2018-12-27 18:57
حجم	52.05 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.5.4-Google / 2018-12-19

الجديد في هذا الإصدار

Create your own guides on MAPS.ME and share your favorite places with like-minded people.

Explore interesting locations, new experiences and share your passion for adventures with thousands of travelers around the planet. We’ve created a web-editor where you can turn your guide into a full travel diary.

Dive into the new emotions faster with the updated search in categories

معلومات عامة

نص	8.5.4-Google (2854)
تحميل التسجيل	2018-12-19 09:55
حجم	52.19 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.4.5-Google / 2018-10-16

الجديد في هذا الإصدار

Major bug fixes and improvements, including car navigation, compass issues on some devices, battery issues etc.
And finally, ads removal is launched :-)
Please update maps.

معلومات عامة

نص	8.4.5-Google (2845)
تحميل التسجيل	2018-10-16 06:34
حجم	48.26 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.3.3-Google / 2018-08-10

الجديد في هذا الإصدار

✓ MAPS.ME now has a route library! Hundreds of detailed routes all around the world: where to go, what to see,
where to eat.
✓ Popular locations nearby! Discover nearby section will help you find the most popular places in the city.
✓ Attractive offers from hotels! You can find these from the Hotels category in the search panel. The offers are marked with a percent symbol on the map and in the search results.

معلومات عامة

نص	8.3.3-Google (2833)
تحميل التسجيل	2018-08-10 16:41
حجم	47.8 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.2.7-Google / 2018-05-23

الجديد في هذا الإصدار

✓ We reinvented bookmarks! You can back up them and create lists!
✓ We reimagined the way of booking! Find the hotel on the map and book it, or select a similar one.
✓ We created a special search category for Football World Cup 2018. Tap on it in the host city and find objects related to FWC 2018.
✓ Special offer for the peak season! Advertise in the MAPS.ME app for 3, 6 or 12 months and highlight your business on our website for free! Learn more: https://localbiz.maps.me

معلومات عامة

نص	8.2.7-Google (2827)
تحميل التسجيل	2018-05-23 21:13
حجم	45.85 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.2.4-Google / 2018-05-08

الجديد في هذا الإصدار

✓ We reinvented bookmarks! You can back up them and create lists!
✓ We reimagined the way of booking! Find the hotel on the map and book it, or select a similar one.
✓ We created a special search category for Football World Cup 2018. Tap on it in the host city and find objects related to FWC 2018.
✓ Special offer for the peak season! Advertise in the MAPS.ME app for 3, 6 or 12 months and highlight your business on our website for free! Learn more: https://localbiz.maps.me

معلومات عامة

نص	8.2.4-Google (2824)
تحميل التسجيل	2018-05-08 21:32
حجم	50.27 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.0.3-Google / 2018-01-22

الجديد في هذا الإصدار

Bugfixes;

Map updates:

+ 226 383 objects (incl. cafes, attractions, etc.);

+ 18 cities with rapid-transit navigation. The list of the cities on https://goo.gl/mP1Rvg;

+ 437 000 km of roads and trails;

Please update maps to see changes.

معلومات عامة

نص	8.0.3-Google (2803)
تحميل التسجيل	2018-01-22 21:32
حجم	41.51 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.0.1-Google / 2018-01-18

الجديد في هذا الإصدار

- Build your routes using subways in 74 cities! Of course, offline is available. The list of the cities on https://goo.gl/mP1Rvg

- Discover things around in one click! We added a Discovery button to the bottom menu.

- Christmas Sale! Advertise your business and get an additional free month by writing us at business@maps.me

- As a Christmas gift, we highlighted Christmas markets on maps of 15 cities! Merry Christmas and Happy New Year!

معلومات عامة

نص	8.0.1-Google (2801)
تحميل التسجيل	2018-01-18 17:32
حجم	41.5 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 7.6.5-Google / 2017-11-28

الجديد في هذا الإصدار

— Bugfixes

معلومات عامة

نص	7.6.5-Google (2765)
تحميل التسجيل	2017-11-28 17:05
حجم	38.97 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 7.5.4-Google / 2017-10-12

الجديد في هذا الإصدار

Urgent update of the Puerto Rico map after Hurricane Maria. Made corrections and added more than 1,000,000 objects.

Donations to the victims can be made through the Red Cross humanitarian organization at https://www.redcross.org/donate/donation -> Hurricane Maria

معلومات عامة

نص	7.5.4-Google (2754)
تحميل التسجيل	2017-10-12 14:28
حجم	37.63 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 7.5.3-Google / 2017-09-29

الجديد في هذا الإصدار

*Bugfixes

*We’ve added 610,000 objects to the map, including:

- 22,000 restaurants,

- 18,000 stores,

- 5,000 points of interest.

Please update maps to see changes.

معلومات عامة

نص	7.5.3-Google (2753)
تحميل التسجيل	2017-09-29 05:21
حجم	37.63 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 7.5.2-Google / 2017-09-12

الجديد في هذا الإصدار

— We made pedestrian and bicycle navigation several times faster.

— Intermediate stops in the auto, bicycle, and pedestrian navigation, fixed errors.

— Made map updating 10 times smaller.

— We launched Local Ads, a service for small and medium-size businesses. The owners of the best places will present their services, and the users will no longer get lost among the myriad of offers. Write to us at business@maps.me, and we will tell you how to start.

معلومات عامة

نص	7.5.2-Google (2752)
تحميل التسجيل	2017-09-12 17:34
حجم	37.62 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 7.4.5-Google / 2017-08-12

الجديد في هذا الإصدار

— Bugfixes

— Updated map data

معلومات عامة

نص	7.4.5-Google (2745)
تحميل التسجيل	2017-08-12 18:54
حجم	39.12 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 7.3.7-Google / 2017-06-22

الجديد في هذا الإصدار

We’ve added 210,000 objects to the map, including:

- 19,000 restaurants,

- 17,000 stores,

- 5,000 points of interest.

The inability to build a route has been fixed.

Transliteration: We added an option to turn it off and we don't apply it to the names of the hotels in Booking.com anymore.

Fixing of bugs with the auto-navigation style.

معلومات عامة

نص	7.3.7-Google (2737)
تحميل التسجيل	2017-06-22 04:55
حجم	35.16 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 7.3.5-Google / 2017-05-31

الجديد في هذا الإصدار

Maps Got Smaller

Maps require up to 20% less storage.

Transliteration into Latin

If a street or an object doesn't have a name in your language, it will be spelled using the Latin alphabet.

New Map Style for Driving

Car navigation mode got easier to use.

معلومات عامة

نص	7.3.5-Google (2735)
تحميل التسجيل	2017-05-31 04:38
حجم	35.15 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 7.3.3-Google / 2017-05-25

الجديد في هذا الإصدار

Maps Got Smaller

Maps require up to 20% less storage.

Transliteration into Latin

If a street or an object doesn't have a name in your language, it will be spelled using the Latin alphabet.

New Map Style for Driving

Car navigation mode got easier to use.

معلومات عامة

نص	7.3.3-Google (2733)
تحميل التسجيل	2017-05-25 04:32
حجم	35.15 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 7.2.4-Google / 2017-05-13

الجديد في هذا الإصدار

We’ve added 110,000 objects to the map, including:

• 16,000 restaurants,

• 14,000 stores,

• 4,000 points of interest.

معلومات عامة

نص	7.2.4-Google (2724)
تحميل التسجيل	2017-05-13 05:33
حجم	31.27 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.1.7-Google / 2019-06-05

الجديد في هذا الإصدار

We have updated our guidebook directory. Now it'll be even easier to choose the right one:

- Guides and cities have their own pages
- Guide maps contain previews of points on the map, the length of the route and a brief description about it
- All the information available for a city guide will be displayed on city pages

معلومات عامة

نص	9.1.7-Google (1917)
تحميل التسجيل	2019-06-05 13:22
حجم	53.64 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME 9.0.8-Google / 2019-04-13

الجديد في هذا الإصدار

During each update we add more new places to our maps to your journey even more enjoyable.
This time we've added:
6000+ attractions
15000+ cafés and restaurants
7000+ shops
You can search for the attractions by yourself or just use our guides. We’ve collected all the great places around the planet more than 600 cities.

معلومات عامة

نص	9.0.8-Google (1908)
تحميل التسجيل	2019-04-13 04:27
حجم	50.74 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.4.9-Google / 2018-11-24

الجديد في هذا الإصدار

During each update we add more new places to our maps to your journey even more enjoyable.

This time we've added:
5000+ attractions
2000+ cafés and restaurants
3000+ shops

You can search for the attractions by yourself or just use our guides. We’ve collected all the great places around the planet more than 50 cities.

معلومات عامة

نص	8.4.9-Google (1849)
تحميل التسجيل	2018-11-24 18:19
حجم	46.74 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.2.9-Google / 2018-06-10

الجديد في هذا الإصدار

*World Football Cup 2018 Edition*
We have created the search category “World Football Cup”. The category is available in the host cities. By tapping on it, you will see key objects on the map related to the Football Cup:
✓ Stadiums
✓ FAN ID centres
✓ Broadcasting venues
✓ Key subway stations
✓ Gift shops
Visit local cafes and stores – they usually surprise in the best way. If you are a business owner, write us at business@maps.me, and we will update your page.

معلومات عامة

نص	8.2.9-Google (1829)
تحميل التسجيل	2018-06-10 19:56
حجم	44.63 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.1.3-Google / 2018-04-13

الجديد في هذا الإصدار

- 今日は [kon'nichiwa] means ‘hello’ in Japanese;
- ‘Olá’ means ‘hello’ in Portuguese;
- ‘Hola’ means ‘hello’ in Spanish;
Learn these words and plan your trip to Japan or South America because we have just covered all Japanese and South American cities with offline rapid transit navigation. Check out local cuisines and places of interest: we have added more than 22 022 cafes and 4 000 attractions worldwide.

معلومات عامة

نص	8.1.3-Google (1813)
تحميل التسجيل	2018-04-13 05:35
حجم	45.61 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.1.2-Google / 2018-03-10

الجديد في هذا الإصدار

This time around, we were focusing on Mars mapping for Elon Musk, but then we realized that space will soon be overcrowded. So we decided to insert check-in and check-out fields to our Hotel filters. With their help, MAPS.ME will show you hotels available for your dates. Some more invisible technical improvements were done as well. By the way, the advertised businesses will be visible even from space. Make travellers notice you! Questions: business@maps.me

معلومات عامة

نص	8.1.2-Google (1812)
تحميل التسجيل	2018-03-10 10:17
حجم	45.62 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.0.7-Google / 2018-02-04

الجديد في هذا الإصدار

✓ Bugfixes;

✓ We added 9 more cities with rapid-transit navigation, and now we cover 101 cities in total. To check the list of cities, please

use https://goo.gl/mP1Rvg;

✓ Please update maps to see changes;

معلومات عامة

نص	8.0.7-Google (1807)
تحميل التسجيل	2018-02-04 13:16
حجم	45.35 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 8.0.1-Google / 2017-12-22

الجديد في هذا الإصدار

- Build your routes using subways in 74 cities! Of course, offline is available. The list of the cities on https://goo.gl/mP1Rvg

- Discover things around in one click! We added a Discovery button to the bottom menu.

- Christmas Sale! Advertise your business and get an additional free month by writing us at business@maps.me

- As a Christmas gift, we highlighted Christmas markets on maps of 15 cities! Merry Christmas and Happy New Year!

معلومات عامة

نص	8.0.1-Google (1801)
تحميل التسجيل	2017-12-22 17:28
حجم	40.26 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 7.4.3-Google / 2017-07-20

معلومات عامة

نص	7.4.3-Google (1743)
تحميل التسجيل	2017-07-20 21:10
حجم	38.39 MB
العربية	لا

متطلبات

الروبوت	4.0.3+
هندسة معمارية	ARM7

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows an application to read the current low-level battery use data. May allow the application to find out detailed information about which apps you use.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

MAPS.ME 4.1 / 2014-12-01

معلومات عامة

نص	4.1 (410)
تحميل التسجيل	2014-12-01 15:42
حجم	11.01 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	ARM7 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MAPS.ME 4.0.3 / 2014-11-10

معلومات عامة

نص	4.0.3 (403)
تحميل التسجيل	2014-11-10 10:15
حجم	12.11 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	ARM7 x86

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Maps With Me 2.3.3 / 2013-05-09

معلومات عامة

نص	2.3.3 (233)
تحميل التسجيل	2013-05-09 18:38
حجم	10.46 MB
العربية	لا

متطلبات

الروبوت	2.1+
هندسة معمارية	ARM7 ARM6 x86 mips

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

جميع التطبيقات Maps_Me في dev.mob-core.com

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك, واسمحوا لنا أن نعرف

2012/11/13 11:45

تطبيقات ذات صلة:

4.1 (50)

3.8 (78)

خريطة Google Sky الروبوت

3.3 (66)

خرائط مدينة 2GO خرائط غير متصل

3.1 (31)

الروبوت ياندكس خرائط

3 (72)

Moovit مخطط الطريق

4 (21)

3.7 (18)

3.6 (26)

Navitel والمستكشف Navitel والمستكشف

3.6 (255)

ياندكس. مدينة

4.5 (7)

على TripAdvisor

4 (8)

مستكشف الملفات

© 2011-2025 mob-core.com