مقارنة مع نفس الفيسبوك تويتر ليس حتى الشعبية، تم تسجيل ما مجموعه حوالي 200 مليون شخص، نصفهم من "tvitayut" مرة واحدة في الشهر على الأقل ونصف من نصف من يفعل ذلك كل يوم ... وعلى الرغم من عدد أقل من المستخدمين من تلقاء نفسها التغريد هو أكثر إثارة للاهتمام من أكثر من أي شبكة اجتماعية أخرى، لأن هذا هو ما أصبح تويتر نوع من الدين إلى 50 مليون شخص الذين يفتحون كل يوم على أمل أن تتعلم شيئا جديدا أو لتبادل الأخبار الخاصة بك! في الواقع، وهذا هو القيل والقال فقط ... تنتشر على الفور إلى مساحات لا حصر له من الإنترنت، بحيث إذا أصاب بعض الأخبار على تويتر، ثم أنه من الأسلم أن نقول إن هذا يمكن أن تجد حتى على الجانب الآخر من العالم، مع حوالي بضع دقائق ... لا عجب أصبح رمزا للشبكة الاجتماعية طائر (الاختلاف على حمامة). جزء من السبب في تويتر لا يحب الحكومة، كما هو الحال في تركيا، وقال انه يحظر عموما! لكنها أيضا يمكن أن نفهم، ليست لطيفة جدا عندما يحصل الناس على الأخبار بشكل أسرع من وسائل الإعلام :) في أي حال، وهذا النوع من الفرص لتوسيع نطاق المعلومات قليلا مع الذي استخدمته للعيش، فهذه مسألة أخرى - أكثر من ذلك هو هراء مخاطي من أصدقائك عاطفية جدا، ولكن حتى ان احدهم يحب. وبالإضافة إلى ذلك، في السنوات الأخيرة، أصبح تويتر بشكل وثيق مع الشبكات الاجتماعية الأخرى، لذلك اليوم لإيجاد سوف المئات من أصدقائهم ومعارفهم لن يكون صعبا. تماما مثل تويتر ومختلف المشاهير - هناك مريحة للغاية لنشر معلومات حول ألبومات أو مشاريع جديدة حيث يمكن للجميع التواصل معهم هو سؤال آخر - ما إذا كان الجواب، وإنما هو على سبيل الصدفة. على أي حال، وهنا الملايين من الاتجاهات، من حيث المبدأ، والجميع سوف تجد شيئا لأنفسهم. حتى إذا كنت لا تستطيع العيش بدون أحدث المعلومات ودائما على استعداد لتقاسم أنفسهم مع شيء مثير للاهتمام، ثم هذا التطبيق هو لك!
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
BLUETOOTH_CONNECT
FOREGROUND_SERVICE
MANAGE_OWN_CALLS
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
BLUETOOTH_CONNECT
FOREGROUND_SERVICE
MANAGE_OWN_CALLS
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
BLUETOOTH_CONNECT
FOREGROUND_SERVICE
MANAGE_OWN_CALLS
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
BLUETOOTH_CONNECT
FOREGROUND_SERVICE
MANAGE_OWN_CALLS
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
BLUETOOTH_CONNECT
FOREGROUND_SERVICE
MANAGE_OWN_CALLS
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
BLUETOOTH_CONNECT
FOREGROUND_SERVICE
MANAGE_OWN_CALLS
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
BLUETOOTH_CONNECT
FOREGROUND_SERVICE
MANAGE_OWN_CALLS
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
BLUETOOTH_CONNECT
FOREGROUND_SERVICE
MANAGE_OWN_CALLS
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
BLUETOOTH_CONNECT
FOREGROUND_SERVICE
MANAGE_OWN_CALLS
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
BLUETOOTH_CONNECT
FOREGROUND_SERVICE
MANAGE_OWN_CALLS
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
- Affiliate badges now render in the video player - Premium: Fixed Singup page, now supports longer feature descriptions - Premium: users can now send longer videos in DMs (up to 10 minutes) - Non-community members can now like and bookmark community posts - Fixed a bug where subtitles in the video player are not visible in some cases
معلومات عامة
نص
10.16.0-release.0 (310160000)
تحميل التسجيل
2023-11-15 20:20
حجم
104.45 MB
العربية
لا
متطلبات
الروبوت
6.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
ANSWER_PHONE_CALLS
FOREGROUND_SERVICE
READ_PHONE_NUMBERS
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
ANSWER_PHONE_CALLS
FOREGROUND_SERVICE
READ_PHONE_NUMBERS
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
- Lists now refresh when you navigate to them. - Subtitles now available on the video player. You now have an option to turn it on/off. - Videos can now be long pressed regardless of auto play options - Premium: New Premium+, and Basic tiers are available
معلومات عامة
نص
10.15.0-release.0 (310150000)
تحميل التسجيل
2023-11-07 23:35
حجم
102.8 MB
العربية
لا
متطلبات
الروبوت
6.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
ANSWER_PHONE_CALLS
FOREGROUND_SERVICE
READ_PHONE_NUMBERS
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
ANSWER_PHONE_CALLS
FOREGROUND_SERVICE
READ_PHONE_NUMBERS
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
-You can now long press a photo to embed it in a new post or download it (even in 4K if the photo supports it!) -Hearts are disabled by default when going Live -Removed the GIF button from the floating action button -Unpin and reorder timelines from Timeline Settings screen -Premium: New app icons, fixed access to Account Analytics
Bug fixes: -Recorded spaces are terminated when listening in a background -Crash in Drafts affecting Chinese and Bengali speakers -Video can't be edited
معلومات عامة
نص
10.14.0-release.0 (310140000)
تحميل التسجيل
2023-11-01 12:09
حجم
102.89 MB
العربية
لا
متطلبات
الروبوت
6.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
ANSWER_PHONE_CALLS
FOREGROUND_SERVICE
READ_PHONE_NUMBERS
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
ANSWER_PHONE_CALLS
FOREGROUND_SERVICE
READ_PHONE_NUMBERS
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
FOREGROUND_SERVICE_MEDIA_PLAYBACK
FOREGROUND_SERVICE_MICROPHONE
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
- You can now long press a video to embed it in a new post or download it - You can now go Live from the floating action button - When going Live you now have the option to disable hearts and you now have the option to only allow comments from select groups like your Subscribers, Verified only, etc. - Timeline settings screen now supports swiping and dragging. - Fixed a bug where clicking a reply tweet would take you to the repliers profile. - DM Notifications now use MessagingStyle
معلومات عامة
نص
10.13.1-release.0 (310131000)
تحميل التسجيل
2023-10-26 20:36
حجم
101.59 MB
العربية
لا
متطلبات
الروبوت
6.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
FOREGROUND_SERVICE
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
FOREGROUND_SERVICE
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
- You can now long press a video to embed it in a new post or download it - You can now go Live from the floating action button - When going Live you now have the option to disable hearts and you now have the option to only allow comments from select groups like your Subscribers, Verified only, etc. - Timeline settings screen now supports swiping and dragging. - Fixed a bug where clicking a reply tweet would take you to the repliers profile. - DM Notifications now use MessagingStyle
معلومات عامة
نص
10.12.0-release.0 (310120000)
تحميل التسجيل
2023-10-23 22:04
حجم
101.41 MB
العربية
لا
متطلبات
الروبوت
6.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
FOREGROUND_SERVICE
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
FOREGROUND_SERVICE
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
FOREGROUND_SERVICE
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
FOREGROUND_SERVICE
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
FOREGROUND_SERVICE
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
FOREGROUND_SERVICE
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
FOREGROUND_SERVICE
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
FOREGROUND_SERVICE
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to read the contents of your USB storage.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
POST_NOTIFICATIONS
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.42.0-release.0 (29420000)
تحميل التسجيل
2022-05-20 19:34
حجم
106.68 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.40.0-release.0 (29400000)
تحميل التسجيل
2022-05-06 21:44
حجم
106.74 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.39.0-release.0 (29390000)
تحميل التسجيل
2022-05-01 21:15
حجم
106.54 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.38.0-release.0 (29380000)
تحميل التسجيل
2022-04-13 19:23
حجم
105.78 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.37.0-release.0 (29370000)
تحميل التسجيل
2022-04-08 07:04
حجم
105.2 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.36.0-release.0 (29360000)
تحميل التسجيل
2022-04-03 20:15
حجم
104.7 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.34.0-release.0 (29340000)
تحميل التسجيل
2022-03-19 16:54
حجم
102.1 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.33.0-release.0 (29330000)
تحميل التسجيل
2022-03-14 08:45
حجم
102.08 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.32.0-release.0 (29320000)
تحميل التسجيل
2022-03-05 11:42
حجم
101.66 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.30.0-release.0 (29300000)
تحميل التسجيل
2022-02-17 08:18
حجم
101.26 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.29.1-release.0 (29291000)
تحميل التسجيل
2022-02-14 07:32
حجم
100.52 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.27.0-release.0 (29270000)
تحميل التسجيل
2022-01-28 17:42
حجم
97.97 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.25.0-release.0 (29250000)
تحميل التسجيل
2022-01-19 12:36
حجم
84.57 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
BLUETOOTH_CONNECT
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.22.0-release.0 (29220000)
تحميل التسجيل
2021-12-11 19:02
حجم
83.79 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.21.0-release.0 (29210000)
تحميل التسجيل
2021-12-02 07:49
حجم
83.18 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.20.0-release.00 (29200000)
تحميل التسجيل
2021-11-18 08:38
حجم
81.75 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.19.0-release.00 (29190000)
تحميل التسجيل
2021-11-11 06:06
حجم
80.89 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.17.0-release.00 (29170000)
تحميل التسجيل
2021-11-02 12:40
حجم
79.16 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.13.0-release.00 (29130000)
تحميل التسجيل
2021-10-05 10:48
حجم
80.29 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.11.0-release.00 (29110000)
تحميل التسجيل
2021-09-14 21:07
حجم
91.91 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.9.0-release.00 (29090000)
تحميل التسجيل
2021-09-04 09:32
حجم
91.18 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.8.0-release.01 (29080001)
تحميل التسجيل
2021-08-27 11:55
حجم
89.57 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.7.0-release.00 (29070000)
تحميل التسجيل
2021-08-20 21:57
حجم
85.49 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.4.0-release.00 (29040000)
تحميل التسجيل
2021-07-31 12:29
حجم
84.01 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.2.0-release.00 (29020000)
تحميل التسجيل
2021-07-17 07:22
حجم
79.98 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
9.1.0-release.00 (29010000)
تحميل التسجيل
2021-07-10 19:26
حجم
79.61 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
8.99.0-release.00 (28990000)
تحميل التسجيل
2021-06-23 05:15
حجم
81.44 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
8.98.0-release.00 (28980000)
تحميل التسجيل
2021-06-17 11:59
حجم
80.46 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
8.97.0-release.00 (28970000)
تحميل التسجيل
2021-06-10 05:28
حجم
79.09 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
8.96.0-release.00 (28960000)
تحميل التسجيل
2021-06-06 09:37
حجم
73.81 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
We made improvements and squashed bugs so Twitter is even better for you.
معلومات عامة
نص
8.95.0-release.00 (28950000)
تحميل التسجيل
2021-05-28 09:36
حجم
73.59 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7 x86_64 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to request authentication tokens.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
FOREGROUND_SERVICE
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
In May, we tested a new way to have a chat with exactly who you want, so you can create and consume more meaningful exchanges. Now, everyone can try this new feature and choose who can reply to their Tweets.
We’ve updated Explore location settings so you can see what’s happening anywhere from wherever you are. Changing your location will now apply to all of Explore, not just Trends. In Explore, select a new location in settings to see what the world is talking about.
We're sharing a few updates to make Twitter better!
We know that some Tweets include manipulated photos or videos that can cause confusion, or even harm.
On 5th March, we'll start adding labels to address these Tweets and give people more context around them. We'll also enforce a new rule: you may not deceptively share synthetic or manipulated media that are likely to cause harm.
Tweeting in Arabic, Hebrew, or Persian/Farsi? We've updated the layout for right-to-left languages!
معلومات عامة
نص
7.93.2-release.50 (17932050)
تحميل التسجيل
2019-05-15 17:55
حجم
30.47 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Tweeting in Arabic, Hebrew, or Persian/Farsi? We've updated the layout for right-to-left languages!
معلومات عامة
نص
7.93.2-release.50 (17932050)
تحميل التسجيل
2019-05-15 17:55
حجم
30.49 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Sometimes, a polish is all you need. No big changes, just a shine.
معلومات عامة
نص
7.91.1-release.46 (17911046)
تحميل التسجيل
2019-04-18 17:39
حجم
33.44 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Sometimes, a polish is all you need. No big changes, just a shine.
معلومات عامة
نص
7.91.1-release.46 (17911046)
تحميل التسجيل
2019-04-18 17:40
حجم
32.87 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Sometimes, a polish is all you need. No big changes, just a shine.
معلومات عامة
نص
7.90.0-release.44 (17900044)
تحميل التسجيل
2019-04-11 06:44
حجم
30.28 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Sometimes, a polish is all you need. No big changes, just a shine.
معلومات عامة
نص
7.90.0-release.44 (17900044)
تحميل التسجيل
2019-04-11 06:45
حجم
30.3 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
You may not be able to *see* the changes, but we've made a few to keep your Twitter running at 100%.
معلومات عامة
نص
7.89.0-release.43 (17890043)
تحميل التسجيل
2019-04-03 10:11
حجم
30.21 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
You may not be able to *see* the changes, but we've made a few to keep your Twitter running at 100%.
معلومات عامة
نص
7.89.0-release.43 (17890043)
تحميل التسجيل
2019-04-03 10:11
حجم
30.23 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
You may not be able to *see* the changes, but we've made a few to keep your Twitter running at 100%.
معلومات عامة
نص
7.88.0-release.41 (17880041)
تحميل التسجيل
2019-03-27 06:07
حجم
29.82 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
You may not be able to *see* the changes, but we've made a few to keep your Twitter running at 100%.
معلومات عامة
نص
7.88.0-release.41 (17880041)
تحميل التسجيل
2019-03-27 06:07
حجم
29.84 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Bugs aren't fun. We got rid of some in this update, so your Twitter experience will be even better.
معلومات عامة
نص
7.87.0-release.39 (17870039)
تحميل التسجيل
2019-03-20 12:15
حجم
29.92 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Bugs aren't fun. We got rid of some in this update, so your Twitter experience will be even better.
معلومات عامة
نص
7.87.0-release.39 (17870039)
تحميل التسجيل
2019-03-20 12:15
حجم
29.96 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
We gave our camera an upgrade! Swipe left from your timeline or tap the camera icon in the Tweet composer to share photos, videos, or a live stream with your followers.
معلومات عامة
نص
7.86.0-release.37 (17860037)
تحميل التسجيل
2019-03-18 11:13
حجم
30.48 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
We gave our camera an upgrade! Swipe left from your timeline or tap the camera icon in the Tweet composer to share photos, videos, or a live stream with your followers.
معلومات عامة
نص
7.86.0-release.37 (17860037)
تحميل التسجيل
2019-03-18 11:13
حجم
30.51 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Imagine tightening a loose bolt. That's what we did, but to the Twitter app. No crazy new updates, just a tightening up.
معلومات عامة
نص
7.85.0-release.35 (17850035)
تحميل التسجيل
2019-03-08 14:59
حجم
30.11 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Not all changes are visible, but we can still celebrate them.
معلومات عامة
نص
7.84.0-release.34 (17840034)
تحميل التسجيل
2019-02-26 13:59
حجم
29.4 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Not all changes are visible, but we can still celebrate them.
معلومات عامة
نص
7.83.0-release.33 (17830033)
تحميل التسجيل
2019-02-22 04:00
حجم
29.34 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Not all changes are visible, but we can still celebrate them.
معلومات عامة
نص
7.83.0-release.33 (17830033)
تحميل التسجيل
2019-02-22 04:01
حجم
29.35 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Better, faster, stronger. We cleaned up behind the curtain so your Twitter is even better.
معلومات عامة
نص
7.82.0-release.32 (17820032)
تحميل التسجيل
2019-02-12 05:45
حجم
30.42 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
You may not be able to *see* the changes, but we've made a few to keep your Twitter running at 100%.
معلومات عامة
نص
7.80.0-release.28 (17800028)
تحميل التسجيل
2019-01-29 11:40
حجم
30.03 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
You may not be able to *see* the changes, but we've made a few to keep your Twitter running at 100%.
معلومات عامة
نص
7.80.0-release.28 (17800028)
تحميل التسجيل
2019-01-29 11:40
حجم
29.98 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
You may not be able to *see* the changes, but we've made a few to keep your Twitter running at 100%.
معلومات عامة
نص
7.79.0-release.27 (17790027)
تحميل التسجيل
2019-01-23 05:31
حجم
30.02 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
You may not be able to *see* the changes, but we've made a few to keep your Twitter running at 100%.
معلومات عامة
نص
7.79.0-release.27 (17790027)
تحميل التسجيل
2019-01-23 05:31
حجم
29.97 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.78.0-release.26 (17780026)
تحميل التسجيل
2019-01-16 05:27
حجم
29.96 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.78.0-release.26 (17780026)
تحميل التسجيل
2019-01-16 05:27
حجم
29.87 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
For this version, we put a glossier finish on the Twitter app you know. No big changes, just a shine.
معلومات عامة
نص
7.77.0-release.25 (17770025)
تحميل التسجيل
2019-01-10 16:31
حجم
29.97 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.75.1-release.23 (17751023)
تحميل التسجيل
2019-01-06 15:26
حجم
30 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.75.1-release.23 (17751023)
تحميل التسجيل
2019-01-06 15:26
حجم
29.87 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.75.0-release.22 (17750022)
تحميل التسجيل
2018-12-19 09:39
حجم
30 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.75.0-release.22 (17750022)
تحميل التسجيل
2018-12-19 09:40
حجم
29.87 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Sometimes, a polish is all you need. No big changes, just a shine.
معلومات عامة
نص
7.74.0-release.18 (8900200)
تحميل التسجيل
2018-12-13 11:18
حجم
30.01 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Sometimes, a polish is all you need. No big changes, just a shine.
معلومات عامة
نص
7.74.0-release.18 (8900200)
تحميل التسجيل
2018-12-13 11:19
حجم
29.88 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Sometimes, a polish is all you need. No big changes, just a shine.
معلومات عامة
نص
7.73.0-release.17 (8900198)
تحميل التسجيل
2018-12-09 11:24
حجم
29.95 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Sometimes, a polish is all you need. No big changes, just a shine.
معلومات عامة
نص
7.73.0-release.17 (8900198)
تحميل التسجيل
2018-12-09 11:24
حجم
29.82 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
In this latest release, we have focused on making bug fixes and refinements to improve your overall Twitter Experience.
معلومات عامة
نص
7.72.0-release.16 (8900197)
تحميل التسجيل
2018-11-30 08:44
حجم
29.79 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
In this latest release, we have focused on making bug fixes and refinements to improve your overall Twitter Experience.
معلومات عامة
نص
7.72.0-release.16 (8900197)
تحميل التسجيل
2018-11-30 08:45
حجم
29.66 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
In this latest release, we have focused on making bug fixes and refinements to improve your overall Twitter Experience.
معلومات عامة
نص
7.71.1-release.15 (8900196)
تحميل التسجيل
2018-11-20 15:44
حجم
29.74 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
In this latest release, we have focused on making bug fixes and refinements to improve your overall Twitter Experience.
معلومات عامة
نص
7.71.1-release.15 (8900196)
تحميل التسجيل
2018-11-20 15:44
حجم
29.62 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
In this latest release, we have focused on making bug fixes and refinements to improve your overall Twitter Experience.
معلومات عامة
نص
7.70.0-release.13 (8900194)
تحميل التسجيل
2018-11-12 08:47
حجم
29.72 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
In this latest release, we have focused on making bug fixes and refinements to improve your overall Twitter Experience.
معلومات عامة
نص
7.69.1-release.12 (8900193)
تحميل التسجيل
2018-11-06 15:16
حجم
29.65 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
In this latest release, we have focused on making bug fixes and refinements to improve your overall Twitter Experience.
معلومات عامة
نص
7.69.1-release.12 (8900193)
تحميل التسجيل
2018-11-06 15:16
حجم
29.53 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
In this latest release, we have focused on making bug fixes and refinements to improve your overall Twitter Experience.
معلومات عامة
نص
7.69.0-release.9 (8900190)
تحميل التسجيل
2018-10-31 06:48
حجم
29.65 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.66.0-release.1063 (8900184)
تحميل التسجيل
2018-10-11 18:47
حجم
29.82 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.66.0-release.1063 (8900184)
تحميل التسجيل
2018-10-11 18:47
حجم
29.7 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.64.0-release.1060 (8900181)
تحميل التسجيل
2018-09-25 11:12
حجم
29.67 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.63.0-release.1059 (8900180)
تحميل التسجيل
2018-09-22 21:13
حجم
29.67 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.63.0-release.1059 (8900180)
تحميل التسجيل
2018-09-22 21:13
حجم
29.52 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.61.0-release.1057 (8900178)
تحميل التسجيل
2018-09-07 06:46
حجم
29.59 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.59.0.1054 (8900175)
تحميل التسجيل
2018-08-25 03:31
حجم
29.64 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.57.0.1051 (8900172)
تحميل التسجيل
2018-08-10 16:11
حجم
29.65 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.57.0.1051 (8900172)
تحميل التسجيل
2018-08-10 16:11
حجم
29.5 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.56.0.1048 (8900169)
تحميل التسجيل
2018-08-01 15:54
حجم
31.08 MB
العربية
لا
متطلبات
الروبوت
4.4+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.55.0.1047 (7900168)
تحميل التسجيل
2018-07-27 07:02
حجم
29.45 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.55.0.1047 (7900168)
تحميل التسجيل
2018-07-27 07:02
حجم
29.3 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.54.0 (7900167)
تحميل التسجيل
2018-07-24 16:38
حجم
30.87 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.53.0 (7900166)
تحميل التسجيل
2018-07-10 11:06
حجم
30.78 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.53.0 (7900166)
تحميل التسجيل
2018-07-10 11:06
حجم
30.61 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.49.0 (7160155)
تحميل التسجيل
2018-06-15 09:44
حجم
33.23 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.48.0 (7160154)
تحميل التسجيل
2018-06-07 16:45
حجم
36.35 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.47.0 (7160153)
تحميل التسجيل
2018-05-31 19:06
حجم
39.61 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.46.0 (7160151)
تحميل التسجيل
2018-05-23 21:48
حجم
39.47 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.44.0 (7160148)
تحميل التسجيل
2018-05-08 21:37
حجم
35.94 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.43.0 (7160146)
تحميل التسجيل
2018-05-02 10:34
حجم
35.95 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.42.0 (7160145)
تحميل التسجيل
2018-04-25 07:19
حجم
35.93 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.41.0 (7160144)
تحميل التسجيل
2018-04-22 20:55
حجم
35.82 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.39.0 (7160140)
تحميل التسجيل
2018-04-06 16:33
حجم
35.72 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.37.0 (7160138)
تحميل التسجيل
2018-03-22 00:48
حجم
35.62 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.36.0 (7160136)
تحميل التسجيل
2018-03-15 22:16
حجم
35.58 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.35.0 (7160135)
تحميل التسجيل
2018-03-06 16:07
حجم
35.37 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.34.0 (7160134)
تحميل التسجيل
2018-02-27 15:35
حجم
35.09 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.33.1 (7160132)
تحميل التسجيل
2018-02-23 16:57
حجم
35.13 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.32.0 (7160130)
تحميل التسجيل
2018-02-15 08:40
حجم
35.07 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.31.0 (7160128)
تحميل التسجيل
2018-02-10 07:05
حجم
35.02 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.30.0 (7160127)
تحميل التسجيل
2018-01-30 18:26
حجم
34.99 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.29.0 (7160124)
تحميل التسجيل
2018-01-22 21:49
حجم
34.96 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.28.0 (7160123)
تحميل التسجيل
2018-01-18 16:48
حجم
34.94 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.27.0 (7160122)
تحميل التسجيل
2018-01-05 18:41
حجم
34.87 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.26.0 (7160121)
تحميل التسجيل
2017-12-22 17:36
حجم
34.88 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.25.0 (7160120)
تحميل التسجيل
2017-12-13 18:25
حجم
31.66 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.24.1 (7160119)
تحميل التسجيل
2017-12-07 09:40
حجم
32.22 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.24.0 (7160118)
تحميل التسجيل
2017-12-02 15:27
حجم
32.21 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.23.0 (7160117)
تحميل التسجيل
2017-11-21 16:53
حجم
32.17 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
7.22.0 (7160114)
تحميل التسجيل
2017-11-16 07:31
حجم
32.51 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.21.0 (7160112)
تحميل التسجيل
2017-11-08 16:11
حجم
32.55 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.17.0 (7160108)
تحميل التسجيل
2017-10-11 07:19
حجم
32.52 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.16.0 (7160107)
تحميل التسجيل
2017-10-03 13:08
حجم
34.3 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.14.0 (7160102)
تحميل التسجيل
2017-09-20 11:50
حجم
33.99 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.13.0 (7160101)
تحميل التسجيل
2017-09-12 17:46
حجم
33.88 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.12.0 (7160099)
تحميل التسجيل
2017-09-06 19:39
حجم
33.28 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.11.0 (7160097)
تحميل التسجيل
2017-08-30 11:52
حجم
36.61 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.10.0 (7160095)
تحميل التسجيل
2017-08-23 07:49
حجم
37.76 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.8.0 (7160092)
تحميل التسجيل
2017-08-08 19:35
حجم
37.3 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.7.0 (7160091)
تحميل التسجيل
2017-08-02 17:55
حجم
37.59 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.6.0 (7160088)
تحميل التسجيل
2017-07-26 06:24
حجم
37.46 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.5.0 (7160086)
تحميل التسجيل
2017-07-19 20:08
حجم
37.7 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
" - Bolder headlines and rounded designs throughout the app make it easier to identify and focus on what matters.
"
- We’ve refreshed the icons, making them more intuitive so that you can more easily follow along and join the action on Twitter.
معلومات عامة
نص
7.1.0 (7160079)
تحميل التسجيل
2017-06-22 05:47
حجم
37.71 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
6.50.0 (7160077)
تحميل التسجيل
2017-06-07 05:37
حجم
34.01 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
6.49.0 (7160075)
تحميل التسجيل
2017-05-31 05:37
حجم
33.8 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
6.48.0 (7160074)
تحميل التسجيل
2017-05-25 05:29
حجم
34.84 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Introducing the "Explore" tab - a single destination to discover content. Outside of your timeline, trends show you what topics are being discussed right now, Moments capture the most popular stories so you can catch up, and search helps you find anything and everything.
معلومات عامة
نص
6.44.0 (7160067)
تحميل التسجيل
2017-04-25 06:20
حجم
34.37 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
6.43.0 (7160066)
تحميل التسجيل
2017-04-19 06:25
حجم
34.34 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.42.0 (7160064)
تحميل التسجيل
2017-04-13 06:30
حجم
31.51 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.40.0 (7160059)
تحميل التسجيل
2017-03-31 07:23
حجم
31.32 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.47.0 (7120153)
تحميل التسجيل
2018-05-31 19:06
حجم
39.07 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.27.0 (7120122)
تحميل التسجيل
2018-01-05 18:41
حجم
34.64 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.49.0 (7110155)
تحميل التسجيل
2018-06-15 09:44
حجم
32.69 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.46.0 (7110151)
تحميل التسجيل
2018-05-23 21:48
حجم
38.27 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.44.0 (7110148)
تحميل التسجيل
2018-05-08 21:37
حجم
35.39 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.43.0 (7110146)
تحميل التسجيل
2018-05-02 10:34
حجم
35.4 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.41.0 (7110144)
تحميل التسجيل
2018-04-22 20:55
حجم
35.28 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.37.0 (7110138)
تحميل التسجيل
2018-03-22 00:48
حجم
35.07 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.36.0 (7110136)
تحميل التسجيل
2018-03-15 22:17
حجم
35.04 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.34.0 (7110134)
تحميل التسجيل
2018-02-27 15:35
حجم
34.56 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.33.1 (7110132)
تحميل التسجيل
2018-02-23 16:58
حجم
34.61 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.32.0 (7110130)
تحميل التسجيل
2018-02-15 08:40
حجم
34.55 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.31.0 (7110128)
تحميل التسجيل
2018-02-10 07:05
حجم
34.5 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.30.0 (7110127)
تحميل التسجيل
2018-01-30 18:26
حجم
34.47 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.29.0 (7110124)
تحميل التسجيل
2018-01-22 21:49
حجم
34.44 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.28.0 (7110123)
تحميل التسجيل
2018-01-18 16:48
حجم
34.42 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.26.0 (7110121)
تحميل التسجيل
2017-12-22 17:36
حجم
34.36 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.25.0 (7110120)
تحميل التسجيل
2017-12-13 18:25
حجم
31.14 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.24.1 (7110119)
تحميل التسجيل
2017-12-07 09:40
حجم
31.68 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.24.0 (7110118)
تحميل التسجيل
2017-12-02 15:27
حجم
31.67 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.15.2 (7110105)
تحميل التسجيل
2017-09-29 05:31
حجم
33.76 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.9.0 (7110093)
تحميل التسجيل
2017-08-16 07:34
حجم
36.85 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few minor updates to make Twitter an even better place.
معلومات عامة
نص
7.4.1 (7110085)
تحميل التسجيل
2017-07-12 22:48
حجم
36.76 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Some users reported that the app crashed. That wasn't good, so we fixed it.
معلومات عامة
نص
7.3.1 (7110082)
تحميل التسجيل
2017-07-06 21:32
حجم
36.96 MB
العربية
لا
متطلبات
الروبوت
4.2+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.39.0 (6160058)
تحميل التسجيل
2017-03-22 07:46
حجم
31.5 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.38.0 (6160056)
تحميل التسجيل
2017-03-16 09:58
حجم
31.26 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.37.0 (6160053)
تحميل التسجيل
2017-03-07 08:18
حجم
30.91 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.36.0 (6160052)
تحميل التسجيل
2017-03-01 07:26
حجم
30.79 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Introducing the "Explore" tab - a single destination to discover content. Outside of your timeline, trends show you what topics are being discussed right now, Moments capture the most popular stories so you can catch up, and search helps you find anything and everything.
There are many ways to see what’s happening on Twitter.
معلومات عامة
نص
6.35.0 (6160050)
تحميل التسجيل
2017-02-19 07:37
حجم
30.47 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Introducing the "Explore" tab - a single destination to discover content. Outside of your timeline, trends show you what topics are being discussed right now, Moments capture the most popular stories so you can catch up, and search helps you find anything and everything.
There are many ways to see what’s happening on Twitter.
معلومات عامة
نص
6.34.0 (6160049)
تحميل التسجيل
2017-02-16 08:44
حجم
30.27 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Introducing the "Explore" tab - a single destination to discover content. Outside of your timeline, trends show you what topics are being discussed right now, Moments capture the most popular stories so you can catch up, and search helps you find anything and everything.
There are many ways to see what’s happening on Twitter.
معلومات عامة
نص
6.33.0 (6160048)
تحميل التسجيل
2017-02-07 07:34
حجم
29.77 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Introducing the "Explore" tab - a single destination to discover content. Outside of your timeline, trends show you what topics are being discussed right now, Moments capture the most popular stories so you can catch up, and search helps you find anything and everything.
There are many ways to see what’s happening on Twitter.
معلومات عامة
نص
6.32.0 (6160047)
تحميل التسجيل
2017-01-31 07:31
حجم
29.66 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.31.0 (6160045)
تحميل التسجيل
2017-01-25 08:51
حجم
30.34 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.30.0 (6160043)
تحميل التسجيل
2017-01-19 08:11
حجم
30.21 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.29.0 (6160042)
تحميل التسجيل
2017-01-13 07:57
حجم
30.21 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.28.0 (6160038)
تحميل التسجيل
2017-01-04 06:59
حجم
30.07 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.27.1 (6160037)
تحميل التسجيل
2016-12-22 08:39
حجم
30.22 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.26.0 (6160035)
تحميل التسجيل
2016-12-10 08:19
حجم
30.23 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.25.0 (6160033)
تحميل التسجيل
2016-12-04 08:35
حجم
30.13 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.24.0 (6160032)
تحميل التسجيل
2016-11-22 07:56
حجم
29.91 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.22.1 (6160030)
تحميل التسجيل
2016-11-10 08:09
حجم
29.18 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.22.0 (6160029)
تحميل التسجيل
2016-11-07 07:12
حجم
29.17 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.21.0 (6160028)
تحميل التسجيل
2016-11-01 07:15
حجم
28.83 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.20.0 (6160027)
تحميل التسجيل
2016-10-25 06:45
حجم
28.46 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.19.0 (6160026)
تحميل التسجيل
2016-10-19 06:45
حجم
28.44 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.18.0 (6160024)
تحميل التسجيل
2016-10-13 07:10
حجم
29.12 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.17.0 (6160023)
تحميل التسجيل
2016-10-04 06:55
حجم
28.94 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.16.0 (6160022)
تحميل التسجيل
2016-09-28 07:35
حجم
28.53 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.15.0 (6160020)
تحميل التسجيل
2016-09-22 07:29
حجم
28.23 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.14.0 (6160019)
تحميل التسجيل
2016-09-13 06:35
حجم
28.2 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.13.0 (6160017)
تحميل التسجيل
2016-09-07 07:03
حجم
28.08 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.10.0 (6160014)
تحميل التسجيل
2016-08-16 06:27
حجم
28.4 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.9.1 (6160013)
تحميل التسجيل
2016-08-10 07:33
حجم
28.33 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.8.0 (6160010)
تحميل التسجيل
2016-08-04 07:21
حجم
28.09 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
See your Tweets when the lights go out. Night Mode in Modern Android delivers a dark color palette that's made for reading in the dark.
معلومات عامة
نص
6.7.0 (6160009)
تحميل التسجيل
2016-07-28 06:49
حجم
28.03 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.6.0 (6160008)
تحميل التسجيل
2016-07-18 02:01
حجم
28.01 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
A few updates to make Twitter even better. Happy Tweeting!
معلومات عامة
نص
6.5.0 (6110007)
تحميل التسجيل
2016-07-11 21:19
حجم
27.59 MB
العربية
لا
متطلبات
الروبوت
4.1+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to read personal profile information stored on your device, such as your name and contact information. This means the app can identify you and may send your profile information to others.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to request authentication tokens.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to read the contents of your USB storage.