برنامج الروبوت / المراجع /
0 (0)
APPY المهوس - أخبار تكنولوجيا المعلومات
الاطلاع على ملفات أبك المتاحة

وصف:

عالم الإنترنت والأجهزة وكل ما له صلة معهم في السنوات الأخيرة أصبحت ضخمة وأحيانا من المستحيل ببساطة لتتبع كل ما يدور، ولكن حاول المطورين لتصحيح أنباء الجمهورية هو الوضع محزن وعرضت لأصحاب الروبوت ودائرة الرقابة الداخلية التطبيق الذي يسمح التحديثات إلى أن تسترشد في الهندسة والتكنولوجيا.
من الصعب في البداية إلى الاعتقاد، لكنه يغطي طيفا وضخمة deytstvitelno كل ما قد تصب في مصلحة هذه المهوسون، فإنه ليس من المستغرب أنه يتطور باستمرار، وعدد من التنزيلات تقترب تدريجيا خمسة ملايين، لذلك أنضم إليكم، ولكن للأسف هناك مشكلة واحدة أننا لا نستطيع أن نتجاهل .

المشكلة الرئيسية هي أن جميع المواد يمكن أن تجد في APPY المهوس - أخبار تكنولوجيا المعلومات مكتوبة باللغة الإنجليزية، لذلك إذا كنت تعرف أنه في المرحلة الثانوية أو أقل، ثم قراءة كل هذا سوف يكون من الصعب، ولكن إذا كنت تتحدث اللغة تماما - مشاكل لا، وقراءة لصحتك! كل يوم سوف تتلقى المواد الجديدة والأخبار المثيرة، مع العلم أنه لن يكون دائما على الحصان! وبالإضافة إلى ذلك، وتطبيق لديها قناعاتها "الكتاب المقدس" الذي يحتوي على أرشيف الأخبار التي التصفح حيث يمكنك العثور على كمية ضخمة لا تقل عن معلومات مفيدة.


ملامح التطبيق APPY المهوس - أخبار تكنولوجيا المعلومات:



تطبيق عيوب APPY المهوس - أخبار تكنولوجيا المعلومات:


خلاصة القول: قطعة كبيرة من البرمجيات، ولكن لا يصلح إلا لأولئك الذين هم على استعداد لقراءة الأخبار باللغة الإنجليزية في جميع النواحي الأخرى وبصرف النظر عن المنافسة!

إعلان

تحميل APPY المهوس - أخبار تكنولوجيا المعلومات 6.7.0

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
الجديد في هذا الإصدار
At Appy Geek, we believe we should provide you with all the tech and geek news you need. Some of our major updates bring you primary features that help you to keep up with thousands of tech news sources and share them with the world. Other smaller updates, like this one, may be invisible to the naked eye but they remove glitches and make news reading an enjoyable experience
Like the app? Love that update? Please support us by leaving a review!
Send feedback to contact.us@news-republic.com
معلومات عامة
نص 6.7.0 (6700)
تحميل التسجيل 2017-07-10 13:41
حجم 11.69 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

ACCESS_PHONE_STATE

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

ACCESS_PHONE_STATE
Appy Geek 6.6.7 / 2017-03-22

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
الجديد في هذا الإصدار
At Appy Geek, we believe we should provide you with all the tech and geek news you need. Some of our major updates bring you primary features that help you to keep up with thousands of tech news sources and share them with the world. Other smaller updates, like this one, may be invisible to the naked eye but they remove glitches and make news reading an enjoyable experience
Like the app? Love that update? Please support us by leaving a review!
Send feedback to contact.us@news-republic.com
معلومات عامة
نص 6.6.7 (6607)
تحميل التسجيل 2017-03-22 08:02
حجم 10.84 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

ACCESS_PHONE_STATE

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

ACCESS_PHONE_STATE
Appy Geek 6.6.2 / 2017-01-04

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
الجديد في هذا الإصدار
At Appy Geek, we believe we should provide you with all the tech and geek news you need. Some of our major updates bring you primary features that help you to keep up with thousands of tech news sources and share them with the world. Other smaller updates, like this one, may be invisible to the naked eye but they remove glitches and make news reading an enjoyable experience
Like the app? Love that update? Please support us by leaving a review!
Send feedback to contact.us@news-republic.com
معلومات عامة
نص 6.6.2 (6602)
تحميل التسجيل 2017-01-04 07:03
حجم 12.33 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

ACCESS_PHONE_STATE

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

ACCESS_PHONE_STATE
Appy Geek 6.4.6 / 2016-10-19

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
الجديد في هذا الإصدار
At Appy Geek, we believe we should provide you with all the tech and geek news you need. Some of our major updates bring you primary features that help you to keep up with thousands of tech news sources and share them with the world. Other smaller updates, like this one, may be invisible to the naked eye but they remove glitches and make news reading an enjoyable experience
Like the app? Love that update? Please support us by leaving a review!
Send feedback to contact.us@news-republic.com
معلومات عامة
نص 6.4.6 (6406)
تحميل التسجيل 2016-10-19 07:15
حجم 12.46 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

ACCESS_PHONE_STATE

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

ACCESS_PHONE_STATE
Appy Geek 6.4.4 / 2016-09-04

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
الجديد في هذا الإصدار
At Appy Geek, we believe we should provide you with all the tech and geek news you need. Some of our major updates bring you primary features that help you to keep up with thousands of tech news sources and share them with the world. Other smaller updates, like this one, may be invisible to the naked eye but they remove glitches and make news reading an enjoyable experience
Like the app? Love that update? Please support us by leaving a review!
Send feedback to contact.us@news-republic.com
معلومات عامة
نص 6.4.4 (6404)
تحميل التسجيل 2016-09-04 09:24
حجم 12.47 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

ACCESS_PHONE_STATE

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

ACCESS_PHONE_STATE
Appy Geek 6.4.1 / 2016-08-31

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
الجديد في هذا الإصدار
At Appy Geek, we believe we should provide you with all the tech and geek news you need. Some of our major updates bring you primary features that help you to keep up with thousands of tech news sources and share them with the world. Other smaller updates, like this one, may be invisible to the naked eye but they remove glitches and make news reading an enjoyable experience
Like the app? Love that update? Please support us by leaving a review!
Send feedback to contact.us@news-republic.com
معلومات عامة
نص 6.4.1 (6401)
تحميل التسجيل 2016-08-31 10:28
حجم 12.49 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

ACCESS_PHONE_STATE

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

ACCESS_PHONE_STATE
Appy Geek 6.2.1 / 2016-05-29

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
الجديد في هذا الإصدار
- Create an account and become a fully fledged Geek!
- Meet your personal news profile! It shows all the articles you shared, commented on and reacted to. It also keeps track of the surveys you participated in!
- Follow your friends and relatives and learn what tech is important to them
- Follow Super Geeks and discover what's hot with the top ranked Geeks in the app
- Are you a tech junkie? Get your rank and compare it with your friends, family & followers!
معلومات عامة
نص 6.2.1 (6201)
تحميل التسجيل 2016-05-29 04:27
حجم 12.1 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.
Appy Geek 6.2.0 / 2016-05-21

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
معلومات عامة
نص 6.2.0 (6200)
تحميل التسجيل 2016-05-21 04:44
حجم 12.1 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.
Appy Geek 5.6.6 / 2016-02-07

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
معلومات عامة
نص 5.6.6 (566)
تحميل التسجيل 2016-02-07 04:40
حجم 8.83 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.
Appy Geek 5.5.4 / 2016-01-06

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
معلومات عامة
نص 5.5.4 (554)
تحميل التسجيل 2016-01-06 04:14
حجم 8.78 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.
Appy Geek 5.4.4 / 2015-12-05

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
معلومات عامة
نص 5.4.4 (544)
تحميل التسجيل 2015-12-05 04:17
حجم 8.78 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.
Appy Geek 5.4.2 / 2015-11-19

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
معلومات عامة
نص 5.4.2 (542)
تحميل التسجيل 2015-11-19 04:34
حجم 8.89 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.
Appy Geek 5.2.0 / 2015-10-02

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
معلومات عامة
نص 5.2.0 (520)
تحميل التسجيل 2015-10-02 02:59
حجم 8.13 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.
Appy Geek 5.1.3 / 2015-08-07

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
معلومات عامة
نص 5.1.3 (513)
تحميل التسجيل 2015-08-07 10:39
حجم 7.87 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.
Appy Geek 5.0.7 / 2015-05-05

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
معلومات عامة
نص 5.0.7 (507)
تحميل التسجيل 2015-05-05 05:01
حجم 7.42 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.
Appy Geek 4.4.4 / 2015-02-17

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
معلومات عامة
نص 4.4.4 (444)
تحميل التسجيل 2015-02-17 04:35
حجم 6.78 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to prevent the device from going to sleep.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to prevent the device from going to sleep.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.
Appy Geek 4.4.3 / 2015-02-03

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
معلومات عامة
نص 4.4.3 (443)
تحميل التسجيل 2015-02-03 04:30
حجم 6.78 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to prevent the device from going to sleep.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to prevent the device from going to sleep.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.
Appy Geek 4.4.2 / 2015-01-21

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
معلومات عامة
نص 4.4.2 (442)
تحميل التسجيل 2015-01-21 23:16
حجم 6.77 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to prevent the device from going to sleep.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to prevent the device from going to sleep.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.
Appy Geek 4.4.1 / 2015-01-12

APPY المهوس - أخبار تكنولوجيا المعلومات

تقدم
معلومات عامة
نص 4.4.1 (441)
تحميل التسجيل 2015-01-12 08:23
حجم 6.79 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to prevent the device from going to sleep.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to set the system wallpaper.

Allows the app to prevent the device from going to sleep.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك, واسمحوا لنا أن نعرف

أخبار
2015/01/12 17:21
تطبيقات ذات صلة:
سرقة السيارات الكبرى: iFruit
3.6 (683)
الصورة الكبيرة
3 (16)
وصفات إخوانه
4.2 (203)
مذهلة MINECRAFT البيت
4.2 (332)
الدوري الاميركي للمحترفين المهوس
4.2 (18)
دروس التصوير الفوتوغرافي
4.2 (15)
ChessBase على الانترنت
4 (71)
الفيفا
4 (30)
أفضل وصفات من العالم
4 (23)
معدل والسلع
4 (40)
دليل MINECRAFT
3.8 (221)
سوق Mobogenie
3.8 (1037)
© 2011-2024 mob-core.com