تحميل osmino واي فاي: واي فاي مجانية لايت 4.203.02 لالروبوت

برنامج الروبوت / الإنترنت /

3.7 (57)

osmino واي فاي: واي فاي مجانية لايت

الاطلاع على ملفات أبك المتاحة

وصف:

واي فاي شبكة المدن الرئيسية والبلدات في جميع أنحاء العالم منذ فترة طويلة يلفها حرفيا، وبعضها قد تدفع مع كلمة السر ومجموعة متنوعة من مجانا، عليهم ويقصد هذا التطبيق!
مطوري RIWW هناك تطبيق آخر للبحث عن شبكات واي فاي، لكنها قررت أن تجعل نسخة مبسطة، والتي أصبحت التطبيق لالروبوت osmino واي فاي: واي فاي مجانية لايت! أزالوا جميع الزائدة وترك فقط أهم، بحيث يمكنك الوصول إليها في لمسة زر واحدة، بالنسبة لمعظم المستخدمين، وليس هو مطلوب!

هذا التطبيق هو شعبية جدا، فإنه يشمل الموقع من شبكات الواي فاي مجانا في أكثر من خمسين بلدا في جميع أنحاء العالم، وعدد من النقاط المجانية لديها بالفعل أكثر من 12 مليون، وليس قليلا جدا؛) وبطبيعة الحال، تركيزهم هو أعلى في المدن الكبيرة، ولكن وهذا أمر منطقي، وخدمة الواي فاي يمكن العثور هناك في كل زاوية! وعدد هذه الشبكات يتزايد كل تثبيت التطبيق يمكن إضافة شبكة جديدة، أو وجدت من إدخال كلمة المرور، لا يهم!

جوهر التطبيق - مدير مريحة جدا وبسيطة بشكل لا يصدق التي يمكن الاتصال حتى تلقائيا إلى أي شبكة متوفرة ضمن النطاق. الملحق متزامنة بانتظام مع بطاقة الشبكة متاح واي فاي ويسبب خريطة جديدة، لذلك عليك دائما استخدام أحدث البيانات. ما هو مهم جدا - كل نقاط اتصال اختبارها من قبل المستخدمين ولا تظهر من العدم، التحقق فقط من المعلومات!

ملامح واي فاي التطبيق osmino: مجانا واي فاي لايت

واجهة بسيطة
القليل أو لا تحكم، كل شيء التلقائي
تغطية أكثر من 50 بلدا في جميع أنحاء العالم
أكثر من 12 ميون نقاط اتصال
جميع مجانا!

النتيجة: تطبيق سهل الاستعمال الذي لا غنى عنه بالنسبة لأولئك الذين هم دائما في حاجة إلى حرة وأي فأي، ولكن عند النظر أنه مجاني، ثم كل خرافة!

إعلان

تحميل osmino واي فاي: واي فاي مجانية لايت 4.203.02

الجديد في هذا الإصدار

Major bug fixes

معلومات عامة

نص	4.203.02 (420302)
تحميل التسجيل	2020-08-30 10:21
حجم	7.31 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.201.10 / 2020-06-26

الجديد في هذا الإصدار

Bug fixes

معلومات عامة

نص	4.201.10 (420110)
تحميل التسجيل	2020-06-26 19:31
حجم	6.88 MB
العربية	لا

متطلبات

الروبوت	4.4+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.144.02 / 2020-06-26

الجديد في هذا الإصدار

Major bug fixes

معلومات عامة

نص	4.144.02 (414402)
تحميل التسجيل	2020-06-26 19:31
حجم	6.91 MB
العربية	لا

متطلبات

الروبوت	4.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.144.02 / 2019-06-16

الجديد في هذا الإصدار

Bug fixes

معلومات عامة

نص	4.144.02 (414402)
تحميل التسجيل	2019-06-16 22:26
حجم	6.91 MB
العربية	لا

متطلبات

الروبوت	4.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.142.10 / 2019-03-12

الجديد في هذا الإصدار

Bug fixes

معلومات عامة

نص	4.142.10 (414210)
تحميل التسجيل	2019-03-12 17:20
حجم	6.78 MB
العربية	لا

متطلبات

الروبوت	4.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.140.01 / 2018-06-07

الجديد في هذا الإصدار

Bug fixes

معلومات عامة

نص	4.140.01 (414001)
تحميل التسجيل	2018-06-07 16:44
حجم	6.45 MB
العربية	لا

متطلبات

الروبوت	3.0+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.139.02 / 2017-09-29

الجديد في هذا الإصدار

Bug fixes

معلومات عامة

نص	4.139.02 (413902)
تحميل التسجيل	2017-09-29 05:32
حجم	6.43 MB
العربية	لا

متطلبات

الروبوت	3.0+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.138.01 / 2017-06-10

الجديد في هذا الإصدار

Bug fixes

معلومات عامة

نص	4.138.01 (413801)
تحميل التسجيل	2017-06-10 11:59
حجم	6.47 MB
العربية	لا

متطلبات

الروبوت	3.0+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.137.01 / 2016-09-28

الجديد في هذا الإصدار

Bug fixes

معلومات عامة

نص	4.137.01 (413701)
تحميل التسجيل	2016-09-28 07:53
حجم	6.47 MB
العربية	لا

متطلبات

الروبوت	3.0+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.136.09 / 2016-09-19

الجديد في هذا الإصدار

Check your Internet connection with our new Speedtest feature.

معلومات عامة

نص	4.136.09 (413609)
تحميل التسجيل	2016-09-19 06:21
حجم	7.25 MB
العربية	لا

متطلبات

الروبوت	3.0+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.131.05 / 2016-07-16

الجديد في هذا الإصدار

Check your Internet connection with our new Speedtest feature.

معلومات عامة

نص	4.131.05 (413105)
تحميل التسجيل	2016-07-16 20:42
حجم	7.28 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.130.00 / 2016-07-06

الجديد في هذا الإصدار

Minor Bugs Fixed

معلومات عامة

نص	4.130.00 (413000)
تحميل التسجيل	2016-07-06 07:52
حجم	6.47 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.129.01 / 2016-06-28

معلومات عامة

نص	4.129.01 (412901)
تحميل التسجيل	2016-06-28 07:43
حجم	6.47 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.127.05 / 2016-05-29

معلومات عامة

نص	4.127.05 (412705)
تحميل التسجيل	2016-05-29 04:09
حجم	6.47 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.127.03 / 2016-05-21

معلومات عامة

نص	4.127.03 (412703)
تحميل التسجيل	2016-05-21 04:22
حجم	6.47 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.126.04 / 2016-04-11

معلومات عامة

نص	4.126.04 (412604)
تحميل التسجيل	2016-04-11 03:41
حجم	6.47 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.125.01 / 2016-03-26

معلومات عامة

نص	4.125.01 (412501)
تحميل التسجيل	2016-03-26 05:47
حجم	6.44 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.123.06 / 2016-03-18

معلومات عامة

نص	4.123.06 (412306)
تحميل التسجيل	2016-03-18 05:57
حجم	6.44 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.123.00 / 2016-03-02

معلومات عامة

نص	4.123.00 (412300)
تحميل التسجيل	2016-03-02 03:53
حجم	6.41 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.122.09 / 2016-02-23

معلومات عامة

نص	4.122.09 (412209)
تحميل التسجيل	2016-02-23 04:05
حجم	6.41 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.121.02 / 2015-12-05

معلومات عامة

نص	4.121.02 (412102)
تحميل التسجيل	2015-12-05 04:01
حجم	6.13 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.119.03 / 2015-06-16

معلومات عامة

نص	4.119.03 (411903)
تحميل التسجيل	2015-06-16 06:22
حجم	5.01 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.118.05 / 2015-06-02

معلومات عامة

نص	4.118.05 (411805)
تحميل التسجيل	2015-06-02 04:37
حجم	6.22 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.116.10 / 2015-04-21

معلومات عامة

نص	4.116.10 (411610)
تحميل التسجيل	2015-04-21 04:26
حجم	6.22 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Wi-Fi 4.115.05 / 2015-01-28

معلومات عامة

نص	4.115.05 (411505)
تحميل التسجيل	2015-01-28 07:51
حجم	6.6 MB
العربية	لا

متطلبات

الروبوت	2.3+
هندسة معمارية	-

تحقق التطبيق

يتم إيداع الملف

إذن

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

Allows the app to send sticky broadcasts, which remain after the broadcast ends. Excessive use may make the device slow or unstable by causing it to use too much memory.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to read the contents of your USB storage.

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك, واسمحوا لنا أن نعرف

2015/01/29 07:50

تطبيقات ذات صلة:

4.1 (47)

إشارة الداعم 2X

3.3 (462)

Joyfe - التي يرجع تاريخها آمنة

4.1 (61)

4 (296)

تسوق Aliexpress التطبيقات

3.9 (44)

3.9 (43)

3.9 (55)

3.9 (74)

SolMail - الكل في واحد التطبيق الإلكتروني

3.9 (36)

Hotspotlist - واي فاي مجاني

3.8 (31)

Flirchi - يؤرخ المجتمع

3.8 (256)

البريد Mail.Ru

3.8 (51)

© 2011-2024 mob-core.com