ميو مسجلات الفيديو الذي ينتج أصلا مواءمتها مع الملاحين، والسماح حتى لوحات خاصة للعاملين الصحيين، ومجهزة ميزات خاصة لمساعدتهم في عملهم. ليس من المستغرب أن بعضهم لا يمكنك الوفاء في الحياة اليومية، ولكن في النهاية هم أطلقوا شيء التي ساعدتها على ينزل من السماء للشعب - سوار إلكتروني يقيس معدل ضربات القلب وتساعد على إدارة الأدوات الأخرى، وعن طريق الإيماءات. والأساور، والساعات الذكية الأخرى هي شعبية جدا اليوم، أن هناك طلبا ميو GO، والتي سوف تساعدك على أن تكون أكثر إنتاجية لممارسة الرياضة، بدءا من الأهداف المحددة والمعلمات.
والفكرة هنا هي بسيطة للغاية، وطرح التطبيق على الهاتف الذكي الخاص بك عن طريق البلوتوث KONEKT سوار ويذهب! كل شيء آخر (باستثناء النشاط) التطبيق يفعل ذلك بالنسبة لك! ما هي مثيرة للاهتمام، يمكن التطبيق يعمل حتى مع وجود سوار ميو فيلو، بحيث الرياضة للجماهير، لقد حان الربيع؛)
يتميز تطبيق ميو GO:
هناك طريقة التدريب التي تتيح لتحديد الإيقاعات ونفهم ما تحتاجه
عدد كبير من الإعدادات مثيرة للاهتمام ومفيدة
التدريب إحصاءات مفصلة
فضح لهدف في كل يوم ومشاهدة النتائج
تعيين تشغيل المصابيح على سوار
سرعة الإجراء وغيرها من المعالم
التطبيق يسمح لك لمراقبة سوار شحن البطارية
تطبيق هو خال تماما، لا إعلانات، لا دوناتا
تطبيق عيوب ميو GO:
لسوء الحظ، في هذه اللحظة، ومطوري لا يجب أن تعمل بشكل صحيح على جميع الأجهزة، ولكن التطبيق هو جديد جدا، لذلك يدفع إلى الانتظار لفترة أطول قليلا
خلاصة القول: ليس بما في ذلك التطبيقات البديلة التي هي الأكثر احتمالا للعمل مع هذه الشركة الأساور هذا التطبيق هو برنامج مفيد جدا التي تحتاج بالضرورة كل من له علاقة بجدية في الألعاب الرياضية، لذلك إذا كان لديك سوار هذه الشركة - حاول أن تكون على يقين!
Updates to comply with new General Data Protection Regulation requirements: • Updated Terms of Service & Privacy Policy (https://app.paihealth.com/terms/go) to increase clarity and transparency about how we use your data • Provide more clarity about the data we collect during account sign up
معلومات عامة
نص
2.7.4.4 (199)
تحميل التسجيل
2018-05-20 22:38
حجم
16.54 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
- Fixed issue where heart rates are missing from graphs and file extracts for streamed workouts
- Fixed a crash
معلومات عامة
نص
2.7.4.3 (198)
تحميل التسجيل
2018-02-10 07:08
حجم
16.54 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
- Fixed issue where heart rates are missing from graphs and extracted workouts after specifying the activity type
معلومات عامة
نص
2.7.4.2.4 (195)
تحميل التسجيل
2018-01-30 18:28
حجم
16.54 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
- Fixed issue where heart rates are missing from graphs and extracted workouts
- Fixed a crash
- Fixed issue where Today's Activity does not show up under Daily Summaries
- Fixed a firmware update issue where the "OK" button is unresponsive when the device battery is too low
معلومات عامة
نص
2.7.4.2 (193)
تحميل التسجيل
2017-12-22 17:37
حجم
16.54 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
- Enable ALPHA 2 firmware updates for phones running Android OS 8
- Firmware update option can now be selected without a device connected
- Fixed crash affecting users who sync very long workout sessions
- Fixed issue where Arm Position setting cannot be saved
- Security enhancement
معلومات عامة
نص
2.7.4.0 (173)
تحميل التسجيل
2017-10-04 20:49
حجم
16.53 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
- Enable FUSE firmware updates for phones running Android OS 7+
- Today's activity now syncs correctly throughout the day
- Fixed issue where some user device settings were not being saved
- Bug fixes and many stability improvements
معلومات عامة
نص
2.7.3.0 (163)
تحميل التسجيل
2017-09-15 21:12
حجم
16.53 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Here are the key improvements included in this release:
- Improved the extract workout feature as there were some issues experienced with the data export for the first week of the month
- Android 7 users can now update their Fuse Firmware (if required)
- Security enhancements
معلومات عامة
نص
2.7.2.1 (152)
تحميل التسجيل
2017-03-19 09:39
حجم
15.73 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Here are the key improvements included in this release:
- Daily Goals are now reflected according to the settings on the device
- Daily activities are shown in chronological fashion
- Fixed a Google map issue that affected Huawei phones
- UI fix for certain pages Android 7 phones
معلومات عامة
نص
2.7.2 (144)
تحميل التسجيل
2017-03-04 10:17
حجم
15.73 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
We have been working hard on new features and bug fixes. This update includes:
• Bug fix for email notification when account is created
• Stability improvements for the app and improved functionality
معلومات عامة
نص
2.7.1 (136)
تحميل التسجيل
2017-01-19 08:51
حجم
15.72 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
We have been working hard on new features and bug fixes. This update includes:
• Create an account with Mio and store you profile details
• Extract your workouts as a CSV file
• Stability improvements for the app and improved functionality
معلومات عامة
نص
2.7.0 (133)
تحميل التسجيل
2016-12-16 09:49
حجم
15.72 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
We have fixed some issues and made improvements based on your feedback.
معلومات عامة
نص
2.6.4.1 (99)
تحميل التسجيل
2016-10-22 08:05
حجم
12.01 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
We have fixed some issues and made improvements based on your feedback.
معلومات عامة
نص
2.6.4 (98)
تحميل التسجيل
2016-10-19 07:29
حجم
12.01 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
We have fixed some issues and made improvements based on your feedback.
- Fixed some Mio FUSE connectivity & sync issues
- Improved Over-the-air update for all Mio devices
معلومات عامة
نص
2.6.2 (81)
تحميل التسجيل
2016-01-29 04:28
حجم
8.94 MB
العربية
لا
متطلبات
الروبوت
4.3+
هندسة معمارية
ARM8 ARM7 ARM6 x86_64 x86 mips mips64
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to read the contents of your USB storage.
اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك,
واسمحوا لنا أن نعرف